JohnDow Industries JDI-27GFD User manual

Height
Adjustment
Lock
27-Gallon
Portable Oil Drain
Model JDI-27GFD
Owner’s Manual
™
REV 8/21/17
For Service Assistance • Phone Toll Free 1-800-433-0708
Operation:
1. Operation
a. To raise or lower t e funnel - loosen t e funnel eig t
adjustment knob and move t e drain tube up or down
to t desired eig t. (See Fig. 5)
b. Make sure t e lower ball valve is closed before use.
C. Periodically c eck fluid level gauge to see t e amount
of recovered oil t at is in t e tank. Never fill t e tank
over t e maximum level given by t e level indicator.
(See Fig. 6)
Operating Instructions
Fig. 6
Fluid
Level
Gauge
Fig. 5

Assembly & Operating Instructions Assembly Instructions
Fig. 2
Fig. 1
Fig. 3
Fig. 4
PLEASE READ THE ENTIRE O NERS MANUAL
BEFORE USING THE DRAIN.
IMPORTANT!
This drain can only be emptied by gravity feed or using a waste evac system with a
diaphragm pump. Before using see section “To Empty The Drain” to make sure the drain
will work in your facility.
Checklist Of Components
Your portable oil drain was s ipped wit t e following components. Please be sure you receive
t em as listed below. Contact us if anyt ing is missing.
Poly Drain Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
4” Caster W eels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
1/4” x 3/4” Bolts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
3/4” Was ers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Fluid Level Gauge Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Drain Tube Assembly wit Collar and Heig t Adjustment Tool . . . . . . . . . . . . . . . . . . . . . . . . .1
3/4” Ball Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Funnel
Heig t
Adjustment
Fluid Level
Gauge
Cap Wrenc
and Tool
Pockets
To Assemble:
1. Funnel
a. Attac t e funnel coupler to t e t readed neck on t e
funnel. (See Fig 1)
b. Insert t e funnel into t e swivel fitting on top of t e
drain tube. (See Fig 2)
c. Tig ten set-screw to secure funnel.
2. Caster Assembly
a. Attac t e casters to t e drain using t e bolts and
was er provided. (See Fig. 3)
IMPORTANT!
Find t e 3/4” ball valve on t e bottom of t e drain and make
sure it is in t e closed position. T e drain is now ready to
use. (See Fig. 4)

Assembly & Operating Instructions Assembly Instructions
Fig. 2
Fig. 1
Fig. 3
Fig. 4
PLEASE READ THE ENTIRE O NERS MANUAL
BEFORE USING THE DRAIN.
IMPORTANT!
This drain can only be emptied by gravity feed or using a waste evac system with a
diaphragm pump. Before using see section “To Empty The Drain” to make sure the drain
will work in your facility.
Checklist Of Components
Your portable oil drain was s ipped wit t e following components. Please be sure you receive
t em as listed below. Contact us if anyt ing is missing.
Poly Drain Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
4” Caster W eels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
1/4” x 3/4” Bolts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
3/4” Was ers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Fluid Level Gauge Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Drain Tube Assembly wit Collar and Heig t Adjustment Tool . . . . . . . . . . . . . . . . . . . . . . . . .1
3/4” Ball Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Funnel
Heig t
Adjustment
Fluid Level
Gauge
Cap Wrenc
and Tool
Pockets
To Assemble:
1. Funnel
a. Attac t e funnel coupler to t e t readed neck on t e
funnel. (See Fig 1)
b. Insert t e funnel into t e swivel fitting on top of t e
drain tube. (See Fig 2)
c. Tig ten set-screw to secure funnel.
2. Caster Assembly
a. Attac t e casters to t e drain using t e bolts and
was er provided. (See Fig. 3)
IMPORTANT!
Find t e 3/4” ball valve on t e bottom of t e drain and make
sure it is in t e closed position. T e drain is now ready to
use. (See Fig. 4)

Height
Adjustment
Lock
27-Gallon
Portable Oil Drain
Model JDI-27GFD
Owner’s Manual
™
REV 8/21/17
For Service Assistance • Phone Toll Free 1-800-433-0708
Operation:
1. Operation
a. To raise or lower t e funnel - loosen t e funnel eig t
adjustment knob and move t e drain tube up or down
to t desired eig t. (See Fig. 5)
b. Make sure t e lower ball valve is closed before use.
C. Periodically c eck fluid level gauge to see t e amount
of recovered oil t at is in t e tank. Never fill t e tank
over t e maximum level given by t e level indicator.
(See Fig. 6)
Operating Instructions
Fig. 6
Fluid
Level
Gauge
Fig. 5