Johnny Vac SUPERCHARGED JV252 User manual

SUPERCHARGED
JV252
2 Speed Cordless
& Bagless Stick
Vacuum Cleaner
User
Guide
Sturdy, lightweight
and easily maneuverable
stick vacuum with
BLDC drive technology.

JV252
JV252 - 2 - User Guide
Keep this guide close at hand.

JV252 - 3 - User Guide
Loremipsum
TABLE OF CONTENTS
SAFETY PRECAUTIONS ......................................................... 4
COMPONENTS....................................................................... 5
UNPACKING AND ASSEMBLING....................................... 6 - 7
VACUUMING .......................................................................... 8
SWITCH THE WORKING SPEED ............................................ 8
CHARGING THE UNIT............................................................ 9
EMPTYING & CLEANING ............................................. 10 - 12
HOW TO CLEAN THE ROLLER BRUSH ............................... 13
HOW TO CLEAN THE WHEEL AXLES .................................. 13
HOW TO STORE THE VACUUM CLEANER .......................... 14
SERVICING OR REPAIRS..................................................... 14
BASIC TECHNICAL DATA ..................................................... 15
DISPOSAL OF THE UNIT...................................................... 15

JV252 - 4 - User Guide
SAFETY PRECAUTIONS
1. This device can be used by children aged 8 and over. People with reduced physical or
mental abilities or with a lack of experience and knowledge must be supervised in a safe
manner to fully understand the risks involved. Children should not play with the device.
Cleaning and maintenance of this appliance should not be carried out by children without
supervision.
2. This appliance is designed for domestic use only.
3. DO NOT pull on the connection cord, but rather on the plug to separate the appliance from
the main socket.
4. DO NOT use outdoors.
5. DO NOT leave the appliance unattended when it is switched on, as this may be a source of
danger.
6. If the power cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.
7. The following items are strictly prohibited, otherwise your vacuum cleaner will be damaged,
which may cause accidents and personal injury:
• DO NOT pick up large or sharp broken object such as glass.
• DO NOT pick up harming or erodent liquids (solvent, corrosive and detergent).
• DO NOT pick up inflammable or explosive substance such as gasoline or alcohol.
8. Check the device and connections regularly for visible damage. The device must not be used
if the housing is damaged or other damage is present.
9. Never attempt to open the device or charging adapter, or replace the charger adapter power
cable yourself. Always have repairs to this appliance carried out by a qualified technician.
There is a considerable danger for users if the repairs are poorly carried out.
10. DO NOT pinch the charging adapter power cable. When using it, be careful where it is to avoid
tripping hazards. Keep the cable away from hot surfaces (e.g. cooking surfaces, heating
element, etc.).
11. DO NOT touch the main adapter and cable with wet hands.
12. DO NOT point the vacuum cleaner at persons or animals when in operation.
13. Only use the charging adapter on dry surfaces.
14. Only use the device with the accessories supplied.
15. Use only with the provided adaptor.
16. This appliance includes Li-ion batteries; DO NOT incinerate the batteries or expose to high
temperatures, as they may explode.
17. Please keep these instructions in a safe place.

1
2
34
5
6 7 8
9
11
1
2
34
5
6 7 8
910
JV252 - 5 - User Guide
COMPONENTS
1. Body
2. Dust cup assembly
3. HEPA filter cover
4. HEPA filter
5. Power brush roll
6. Charger
7. Battery
8. Wall-mounted hook
9. 3-in-1 Tool
10. Carpet brush
11. Electric tube

JV252 - 6 - User Guide
UNPACKING AND ASSEMBLING
Check that all the parts are in the box (see page 4).
Step 1.
Install the battery as in the picture below.
Step 2.
Install the power brush roll by inserting it into the tube carefully.
Step 3.
Install the tube with brush by inserting it into the vacuum suction tube.

JV252 - 7 - User Guide
Step 4.
Install the 3-in-1 accessories to suction tube or to the tube of vacuum
cleaner as shown below.
Simply push out the tip
Push and slide
Final result
Crevice Tool
Fibers & Hair Tool
Dusting Tool
1
1
2
2
3
3
3-in-1 Tool

JV252 - 8 - User Guide
VACUUMING
Vacuuming oors and carpets
Regularly check that your brush roll is clean and free of debris to prevent
damage to your floors, which are more fragile.
Follow Steps 1-3 to assemble your unit and start using it by pressing the
ON/OFF button.
To clean the tables, furniture, car seats or some corners, just remove the
tube by pressing the release button.
And then follow Step 4 to install the 3-in-1 tool, then press the ON/OFF
button to start the cleaning.
To clean in various situations, the device has two different working speeds.
First, assemble the device following Step 4 (previous page). Press the
ON/OFF button to start the device. The device will run at standard speed.
Press the speed control button, the working speed will switch to high
speed mode. To return to standard speed, press the speed control button
again. You can switch between two different working speeds at any time
according to your needs.
Vacuuming tables, furniture, car seats and more
SWITCH THE WORKING SPEED
Speed Control Button
ON/OFF button

JV252 - 9 - User Guide
CHARGING THE UNIT
Insert the adapter into the socket (note: always make sure the device is
turned off), then connect it to the device. The light gradually becomes
bright, then fades out until the battery is fully charged and all four indicator
lights stay on for 50 seconds. Once the device is plugged into its charging
adapter, it takes about 2.5 to 3 hours to fully charge the battery before first
use. The charger may heat up during charging and this is normal.
Once your device is fully charged, all four indicator lights will remain bright
for 50 seconds. It is necessary to remove the charging adapter or turn off
the AC power.
During the charging process, if the temperature of the battery surface
exceeds 50°C or go lower than 0°C or if the battery enters the
self-protection procedure, the battery will stop until the temperature of the
battery surface returns between 0°C and 45°C. (During the process of
charging, the temperature of the battery surface does not exceed 50°C.
When it is necessary to recharge the battery, the temperature of the battery
surface should be lower than 45°C).
Notice about charging

JV252 - 10 - User Guide
EMPTYING & CLEANING
Notice about discharging
When the battery is discharged, the four LEDs gradually turn off, until the
electrical capacity decreases by up to 8%. When the last light continues to
flash, it reminds you to stop the vacuum cleaner and that the battery needs
to be recharged.
During the discharging process, if the battery surface temperature exceeds
70°C, the four indicator lights keep flashing for 5 seconds, then the battery
enters the self-protection procedure and cuts off the electricity of the
battery. main vacuum cleaner. When the temperature rises to 65°C, the
battery can work again.
Step 1.
Remove the accessories from the body by pressing the release button.
Step 2.
Press the release button to open the dust cup cover, drop out the trash
into the dustbin.

JV252 - 11 - User Guide
Step 3.
Remove the dust cup by pressing the release button, clean the cyclone
part with a toothbrush.
Make sure the parts are dry before reassembling them.
Step 4.
Press the button to open the HEPA lter cover and take out the lter to
wash it under owing water.
Let it air dry until its next use or open the HEPA filter compartment to put
in a new one.

JV252 - 12 - User Guide
Re-install the components
First, reinstall the dust tank in the appliance and then install the HEPA
filter, hose set, brush (or 3-in-1 tool) for future use.

JV252 - 13 -
HOW TO CLEAN THE ROLLER BRUSH
If the roller brush is blocked or stuck for any reason, suction will be less
effective. The roller brush must then be cleaned. First, turn off the
appliance, then carefully use scissors or a sharp knife to remove any
objects such as strings that might have tangled in it.
If the roller brush needs to be removed for cleaning, turn the lock on the
knob providing access to the roller brush to the right using a coin, pull the
roller brush out for cleaning, then replace the brush to its original position
and close the valve serving as a lock by turning the button using a coin to
the left to activate the lock.
REMINDER: Keep all appliance components out of reach of children.
HOW TO CLEAN THE WHEEL AXLES
If a wheel is stuck with bits of wire, hair or dirt. Remove the wheels and
remove the debris that is inserted in the cavity and this, gently with a
screwdriver.
Also clean the wheel axles. Reassemble the wheels, squeezing them snugly
together.
User Guide

JV252 - 14 -
HOW TO STORE THE VACUUM CLEANER
Install the wall bracket on a wall and place the vacuum cleaner by inserting
it into the hook, as shown below.
SERVICING OR REPAIRS
In case of breakdown or faults, the device must be taken to an authorized
service center for repair or replacement.
User Guide

JV252 - 15 -
BAS IC TE CHNICAL DATA
DISPOSAL OF THE UNIT
User Guide
Model: JV252
BLDC motor:
• High speed - 300 W
• Low speed - 120 W
25.2 V - 2200 mAh Li-ion battery
Adapter: Input: 100~240 V - 50 Hz, Output: 30 V - 1 A
Charge time: 2.5 H - 3 H
IF THE DEVICE IS TO BE DISPOSED OF, THE BATTERY MUST BE REMOVED. USED
BATTERIES SHOULD NEVER BE DISPOSED OF WITH HOUSEHOLD WASTE. THESE
SHOULD ALWAYS BE TAKEN TO A RECYCLING STATION.

GUIDE D'UTILISATEUR JV252 - FR-EN
Residential and commercial
vacuum cleaner specialist
FOR
PARTS, ACCESSORIES & VACUUM BAGS
VISIT OUR WEBSITE AT
WWW.JOHNNYVAC.COM
CONGRATULATIONS & THANK YOU
for having chosen one of our product.
Do not return the unit to the retailer
before having spoken with us.
Our most precious wish is that
you really love your vacuum cleaner!
In case of problems, contact our experts at 1 800 361-2043
or by email at [email protected]