Johnson Controls TCHD30 S43S3 Quick start guide

TECHNICAL GUIDE
HORIZONTAL DISCHARGE
AIR CONDITIONERS
13 SEER – R-410A
MODELS:
TCHD30 THRU 60
(2.5 THRU 5 NOMINAL TONS, 3 PHASE)
Due to continuous product improvement, specifications
are subject to change without notice.
Visit us on the web at www.york.com
Additional rating information can be found at
www.ahridirectory.org
WARRANTY
Standard 1-year limited parts warranty.
Standard 5-year limited compressor warranty.
LISTED
TECHNICAL
GUIDE
TECHNICAL
GUIDE
556723-UTG-A-0210
FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE
DESCRIPTION
The 13 SEER Series condensing unit is the outdoor part of a
versatile system of air conditioning. It is designed to be custom-
matched with one of UPG’s complete line of evaporator sec-
tions, with each serving a specific function. Matching air han-
dlers are available for upflow, downflow, or horizontal
applications to provide a complete system. Electric heat kits are
available, if required. Add-on coils are available for use with
upflow, downflow, or horizontal furnaces and air handlers.
FEATURES
•Performance - Efficiency levels from 13.0 SEER/11.5 EER
with a loose coil and up to 15.6 SEER/13.75 EER when cou-
pled with a variable speed indoor blower.
•Easy to Install - Compact “slim-line” design allows for easy
installation in tight spaces. Units can be stacked.
•Lower Installation Cost - Installation time and costs are
reduced by easy power and control wiring connections. The
unit contains enough refrigerant for matching indoor coils
and 15 feet of interconnecting piping.
•Quiet Operation - Levels as low as 71 dBA. High efficiency
scroll compressor and swept wing fan design reducing oper-
ating sound to a mere whisper.
•State Of The Art Coil Technology - Micro-channel (MC2)
aluminum coil technology provides enhanced capacities and
efficiencies plus the benefit of maximum corrosion protection
especially in coastal applications (up to 7 times greater cor-
rosion resistance than conventional copper tube and alumi-
num fin coils).
•Compressor Protection - The compressor is internally pro-
tected against high pressure and temperature. This is
accomplished by the simultaneous operation of high pres-
sure relief valve and a temperature sensor which protects the
compressor if undesirable operating conditions occur. A liq-
uid line filter-drier further protects the compressor.
•Durable Cabinet - Heavy-gage steel cabinet and a tubular
base rail provide added support.
•Durable Finish - Automotive quality finish provides the ulti-
mate protection from harmful U.V. rays and rust creep ensur-
ing long-lasting high quality appearance. A powder-paint
topcoat is applied over a baked-on primer, using a galva-
nized, zinc coated steel base material. The result is a finish
that has been proven in testing to provide 33% greater dura-
bility than conventional powder-coat finishes.
•Aesthetic - Powder paint “Champagne” Color provides an
attractive retail finish.
•Low Maintenance - Long life permanently lubricated motor-
bearings need no annual servicing.
•Easy Service Access - Fully exposed refrigerant connec-
tions and a single panel covering the electrical controls make
for easy servicing of the unit.
•Secured Service Valve - Secured re-usable service valves
are provided on both the liquid and vapor sweat connections
for ease of evacuating and charging.
•Other Features:
- Factory supplied filter drier
- High pressure switch, low pressure switch
- Accumulator and crankcase heater in all sizes
- Up to 200’ line set out of the box
- Zero lot line clearances (6” clearance in either direction)
•Agency Listed - U.L. and C.U.L. listed - approved for out-
door application. The unit is certified in accordance with the
Unitary Small Equipment certification program, which is
based on ARI Standard 210/240.

556723-UTG-A-0210
2Johnson Controls Unitary Products
All dimensions are in inches. They are subject to change without notice.
Certified dimensions will be provided upon request.
.
Physical and Electrical Data
MODEL TCHD30
S43S3
TCHD36
S43S3
TCHD48
S43S3
TCHD60
S43S3
TCHD30
S44S3
TCHD36
S44S3
TCHD48
S44S3
TCHD60
S44S3
Unit Supply Voltage 208-230V, 3I 60Hz 460V, 3I 60Hz
Normal Voltage Range 1187 to 252 432 to 532
Minimum Circuit Ampacity 11.9 17.5 21.5 21.0 7.2 8.8 10.4 10.5
Max. Overcurrent Device Amps 220 30 35 35 15 15 15 15
Min. Overcurrent Device Amps 315 20 25 25 15 15 15 15
Multi-Stage Compressor No No No No No No No No
Compressor Type Scroll Scroll Scroll Scroll Scroll Scroll Scroll Scroll
Compressor Amps Rated Load 8.4 12.8 16.0 15.7 5.2 6.4 7.7 7.8
Locked Rotor 58.0 95.0 120.0 110.0 28.0 45.0 50.0 52.0
Crankcase Heater Yes Yes Yes Yes Yes Yes Yes Yes
Fan Diameter Inches 23 23 23 23 23 23 23 23
Fan Motor
Rated HP 1 / 4 1 / 4 1 / 4 1 / 4 1 / 4 1 / 4 1 / 4 1 / 4
Rated Load Amps 1.45 1.45 1.45 1.45 0.80 0.80 0.80 0.80
Nominal RPM 850 850 850 850 850 850 850 850
Coil
Face Area Sq. Ft. 11.96 11.96 13.96 13.96 11.96 11.96 13.96 13.96
RowsDeep 11111111
Fins / Inches 23 23 23 23 23 23 23 23
Refrigerant Lines4
Max. Length 200 200 200 200 200 200 200 200
Max. Lift 65 65 65 65 65 65 65 65
Max. Drop 150 150 150 150 150 150 150 150
Liquid Line Set OD (Field Installed) 3 / 8 3 / 8 3 / 8 3 / 8 3 / 8 3 / 8 3 / 8 3 / 8
Vapor Line Set OD (Field Installed) 3 / 4 3 / 4 7 / 8 7 / 8 3 / 4 3 / 4 7 / 8 7 / 8
Unit Charge (Lbs. - Oz.) 54-04-85-55-64-04-85-55-6
Charge Per Foot, Oz. 0.68 0.68 0.70 0.70 0.68 0.68 0.70 0.70
Operating Weight Lbs. 195 215 240 250 195 215 240 250
1. Rated in accordance with ARI Standard 110, utilization range “A”.
2. Dual element fuses or HACR circuit breaker. Maximum allowable overcurrent protection.
3. Dual element fuses or HACR circuit breaker. Minimum recommended overcurrent protection.
4. When more than 50 feet of interconnecting tubing and more than 30 feet of vertical lift is used, consult the Application Data (part number
247077). For long-line applications, interconnecting lines over 100 feet must be installed with liquid line solenoid.
5. The Unit Charge is correct for the outdoor unit, matched indoor coil and 15 feet of refrigerant tubing. For tubing lengths other than 15 feet, add
or subtract the amount of refrigerant, using the difference in length multiplied by the per foot value.
B
C
A
Unit
Model
Dimensions
(Inches)
Refrigerant Connection
Service Valve Size
A1
1. Including Fan Guard.
B C Liquid Vapor
30 37-1/8 17-1/8 44-5/8
3/8”
3/4”
36 37-1/8 17-1/8 44-5/8
48 43-1/8 17-1/8 44-5/8 7/8”
60 43-1/8 17-1/8 44-5/8

556723-UTG-A-0210
Johnson Controls Unitary Products 3
System Charge for Various Matched Systems
Outdoor Unit TCHD30S4(3,4)S3 TCHD36S4(3,4)S3 TCHD48S4(3,4)S3 TCHD60S4(3,4)S3
Required Orifice or TXV 11TVM4G1 1TVM4G1 1TVM4J1 1TVM4J1
Factory Charge, lbs-oz 4 - 0 4 - 8 5 - 5 5 - 6
Indoor Coil2,3 Additional Charge, oz
AHP24 – – – –
AHP36 16 12 – –
AHP/SHP60 – – 11 –
AHX18 – – – –
AHX24 – – – –
AHX30 10 – – –
AHX36 16 12 – –
AHX42 27 22 – –
AHX48 26 22 11 –
AHX60 – 27 16 13
AV24 – – – –
AV36 16 12 – –
AV/SV48 – 22 11 –
AV/SV60 – – 11 8
F*FP030 0 – – –
F*FP036 8 4 – –
F*FP040 10 7 – –
F*FP042 – 7 – –
F*FP048 – 16 11 –
F*FP060 – – 16 –
F*FV060 – 8 11 8
F6FP018 – – – –
F6FP024 – – – –
F6FP030 10 – – –
F6FP036 10 7 – –
F6FP042 20 16 – –
F6FP048 10 7 11 –
F6FP060 – 271613
FC/MC/PC18 – – – –
FC/MC/PC24 – – – –
FC/MC/PC30 2 – – –
FC/MC/PC32 10 6 – –
FC/MC/PC35 0 6 – –
FC/MC/PC36 3 0 – –
FC/MC/PC37 16 12 – –
FC/MC/PC42 3 1 – –
FC/MC/PC43 16 0 – –
FC/MC/PC48 27 22 0 –
FC/MC/PC60 – – 10 –
FC/MC62 – – 16 0
HC18 – – – –
HC30 7 – – –
HC36 10 6 – –
HC42 16 12 – –
HC60 – 7 0 –
HD24 – – – –
HD36 14 11 – –
HD48 – 33 24 –
HD60 – – 30 22
UC18 – – – –
UC24 – – – –
For notes see Page 4.

556723-UTG-A-0210
4Johnson Controls Unitary Products
PROCEDURES:
1. Unit factory charge listed on the unit nameplate includes refrigerant for the condenser, the smallest evaporator and 15 feet of interconnecting
line tubing.
2. Verify the TXV and additional charge required for specific evaporator coil in the system using the above table.
3. Additional charge for the amount of interconnecting line tubing greater than 15 feet at the rate specified in Physical and Electrical Data Table.
4. For TXV matches requiring additional charge, the refrigerant needs to be weighed in for specific coil match and lineset length.
5. Permanently mark the unit nameplate with the total system charge. Total System Charge = Base Charge (as shipped) + adder for evap-
orator + adder for line set.
UC30 3–––
UC36 41––
UC42 30––
UC48 21 17 6 –
UC60 – – 11 –
FOOTNOTES:
1. For applications requiring a TXV use 1TVM series kit.
2. Systems matched with furnace or air handlers not equipped with blower-off delays may require blower Time Delay Kit 2FD06700224.
3. PC coils cannot be used in downflow or horizontal applications. FC coils cannot be used in horizontal applications.
System Charge for Various Matched Systems (Continued)
Outdoor Unit TCHD30S4(3,4)S3 TCHD36S4(3,4)S3 TCHD48S4(3,4)S3 TCHD60S4(3,4)S3
Required Orifice or TXV 11TVM4G1 1TVM4G1 1TVM4J1 1TVM4J1
Factory Charge, lbs-oz 4 - 0 4 - 8 5 - 5 5 - 6
Indoor Coil2,3 Additional Charge, oz
COOLING CAPACITY - With Air Handler Coils
UNIT
MODEL
AIR HANDLER COIL
MODEL1
COOLING
MODEL W RATED
CFM
NET MBH SEER EER
TOTAL SENS.
13 SEER AC WITH MV - VARIABLE SPEED
TCHD30S4(3,4)S3
MV12B 17 FC/MC30B 1000 28.2 20.8 14.60 13.00
MV12B 17 FC/MC35B 1000 28.6 21.2 15.00 13.20
MV16C 21 FC/MC35C 1000 28.6 21.2 15.00 13.25
MV12B 17 FC/MC36B 1000 28.6 21.0 15.00 13.15
MV16C 21 FC/MC36C 1000 28.6 21.0 15.00 13.25
MV12B 17 FC/MC43B 1000 29.0 21.6 15.15 13.35
MV16C 21 FC/MC43C 1000 29.0 21.6 15.35 13.50
MV16C 21 FC/MC48C 1000 29.4 21.8 15.50 13.70
TCHD36S4(3,4)S3
MV12B 17 FC/MC35B 1200 33.6 24.6 14.10 12.20
MV16C 21 FC/MC35C 1200 33.8 24.8 14.55 12.55
MV12B 17 FC/MC36B 1200 33.6 24.2 14.00 12.15
MV16C 21 FC/MC36C 1200 33.8 24.4 14.30 12.50
MV12B 17 FC/MC43B 1200 34.4 25.2 14.50 12.50
MV16C 21 FC/MC43C 1200 34.6 25.4 15.00 13.00
MV16C 21 FC/MC48C 1200 35.0 25.6 15.25 13.10
MV12D 24 FC/MC48D 1150 34.6 25.2 15.00 13.00
TCHD48S4(3,4)S3
MV16C 21 FC/MC48C 1600 47.5 34.2 14.00 12.10
MV20D 24 FC/MC48D 1600 47.5 34.2 14.00 12.00
MV20D 24 FC/MC60D 1600 45.5 33.0 13.50 11.60
MV20D 24 FC/MC62D 1600 48.0 34.6 14.50 12.25
TCHD60S4(3,4)S3 MV20D 24 FC/MC62D 1800 57.5 39.5 13.40 11.30
13 SEER AC WITH AV / SV - / F*FV VARIABLE SPEED
TCHD30S4(3,4)S3 AV*36 21 – 960 28.8 21.3 15.50 13.25
TCHD36S4(3,4)S3
AV*36 21 – 1190 34.4 25.3 14.50 12.25
AV/SV*48 24 – 1220 34.8 25.7 15.00 12.75
F*FV060 24 – 1200 33.2 23.8 14.55 12.45
TCHD48S4(3,4)S3
AV/SV*48 24 – 1625 46.5 33.8 13.75 11.75
AV/SV*60 24 – 1560 47.0 34.0 13.75 11.75
F*FV060 24 – 1600 45.5 33.2 13.55 11.60
TCHD60S4(3,4)S3 AV/SV*60 24 – 1730 56.0 37.7 13.25 11.00
F*FV060 24 – 1800 55.0 38.0 13.00 11.00
For notes see Page 5.

556723-UTG-A-0210
Johnson Controls Unitary Products 5
— = Not applicable.
13 SEER AC WITH AHP / SHP / AHX / F*FP
TCHD30S4(3,4)S3
AHP36 21 – 1000 28.4 21.2 13.75 12.20
AHX30 17 – 1025 28.4 21.3 14.50 12.50
AHX36 21 – 1005 29.0 21.7 15.25 13.25
AHX42 21 – 990 29.4 22.1 15.50 13.75
AHX48 24 – 1090 29.8 23.0 15.50 13.75
F*FP030 17 – 1000 27.6 20.0 13.20 11.85
F*FP036 21 – 1000 27.8 20.6 13.40 12.00
F*FP040 21 – 1000 27.8 20.4 13.40 12.00
F6FP030 17 – 1035 28.2 20.9 13.75 12.00
F6FP036 21 – 980 28.2 20.7 14.50 12.75
F6FP042 21 – 1065 29.6 22.4 15.25 13.50
F6FP048 24 – 1055 28.0 21.0 14.50 12.50
TCHD36S4(3,4)S3
AHP36 21 – 1200 34.2 25.0 14.00 12.15
AHX36 21 – 1225 34.4 25.7 14.75 12.50
AHX42 21 – 1190 35.0 25.9 15.25 12.75
AHX48 24 – 1255 35.2 26.3 15.25 12.75
AHX60 24 – 1300 35.6 26.8 15.00 12.75
F*FP036 21 – 1200 33.0 23.8 13.00 11.35
F*FP040 21 – 1200 33.0 24.0 13.00 11.40
F*FP042 21 – 1200 33.0 24.0 13.00 11.40
F5FP048 24 – 1250 35.0 25.8 15.20 13.00
F6FP036 21 – 1210 33.4 24.3 13.75 11.75
F6FP042 21 – 1290 35.2 26.4 14.75 12.50
F6FP048 24 – 1125 32.2 23.3 14.00 11.75
F6FP060 24 – 1240 35.2 26.3 15.00 12.75
TCHD48S4(3,4)S3
AHP/SHP60 24 – 1600 45.5 33.2 13.40 11.50
AHX48 24 – 1660 47.0 34.6 13.75 11.75
AHX60 24 – 1680 47.5 34.8 13.50 11.75
F5FP048 24 – 1700 47.5 35.0 13.75 12.00
F5FP060 24 – 1700 46.0 33.4 13.35 11.55
F6FP048 24 – 1625 45.0 33.2 13.00 11.00
F6FP060 24 – 1710 48.0 35.0 13.50 11.50
TCHD60S4(3,4)S3 AHX60 24 – 1905 57.5 40.2 13.00 11.00
F6FP060 24 – 1710 56.5 38.7 13.00 11.00
Rated in accordance with DOE test procedures (Federal Register 12-27-79 and 3-18-88) and ARI Standards 210.
Cooling MBH based on 8°F entering air temperature, 50% RH, and rated air flow.
EER (Energy Efficiency Ratio) is the total cooling output in BTU’s at 95°F outdoor ambient divided by the total electric power in watt-hours at those conditions.
SEER (Seasonal Energy Efficiency Ratio) is the total cooling output in BTU’s during a normal annual usage period for cooling divided by the total electric power
input in watt-hours during the same period.
1. MC coils available with a factory installed horizontal drain pan. See price pages for specific model number.
COOLING CAPACITY - With Air Handler Coils (Continued)
UNIT
MODEL
AIR HANDLER COIL
MODEL1
COOLING
MODEL W RATED
CFM
NET MBH SEER EER
TOTAL SENS.

556723-UTG-A-0210
6Johnson Controls Unitary Products
COOLING CAPACITY - Upflow, Downflow & Horizontal Furnaces and Coils
UNIT MODEL
FURNACE**
COIL
MODEL
COOLING
CFM RANGE
(Min.-max.) WRATED
CFM
NET MBH SEER1EER
TOTAL SENS.
TCHD30S4(3,4)S3
800 - 1200 14,17 FC/MC/PC30 1000 27.6 20.4 13.25 11.85
800 - 1200 14,17 FC/MC/PC32 1000 28.0 20.8 13.50 12.00
800 - 1200 17,21 FC/MC/PC35 1000 28.0 20.8 13.50 12.00
800 - 1200 14,17,21 FC/MC/PC36 1000 28.0 20.6 13.45 12.00
800 - 1200 14 FC/MC/PC37 1000 28.4 21.2 13.75 12.20
800 - 1200 17,21 FC/MC/PC43 1000 28.4 21.2 13.70 12.20
800 - 1200 14,17 HC30 1000 27.6 20.4 13.35 11.80
800 - 1200 17 HC36 1000 28.0 20.8 13.50 12.00
800 - 1200 21 HC42 1000 28.4 21.2 13.75 12.20
800 - 1200 14,17,21 HD36 1000 27.6 20.0 13.30 11.85
800 - 1200 14,17 UC30 1000 27.8 20.4 13.40 12.00
800 - 1200 21,24 UC48 1000 26.8 20.0 13.00 11.50
TCHD36S4(3,4)S3
1000 - 1400 14 FC/MC/PC32 1200 33.2 24.2 13.20 11.50
1000 - 1400 17,21 FC/MC/PC35 1200 33.2 24.2 13.20 11.50
1000 - 1400 14,17,21 FC/MC/PC36 1200 33.0 24.0 13.00 11.40
1000 - 1400 14 FC/MC/PC37 1200 33.8 24.8 13.50 11.70
1000 - 1400 17,21 FC/MC/PC43 1200 34.0 24.8 13.50 11.75
1000 - 1400 21,24 FC/MC/PC48 1200 34.4 25.2 13.65 12.00
1000 - 1400 17 HC36 1200 33.2 24.2 13.20 11.50
1000 - 1400 21 HC42 1200 33.8 25.0 13.50 11.70
1000 - 1400 14,17,21 HD36 1200 32.4 23.2 13.00 11.20
1000 - 1400 14,17,21,24 HD48 1200 34.2 24.8 13.65 11.85
TCHD48S4(3,4)S3
1400 - 1800 21,24 FC/MC/PC48 1600 47.0 33.8 13.25 11.50
1400 - 1800 21,24 FC/MC62 1600 47.5 34.2 13.35 11.60
1400 - 1800 14,17,21,24 HD48 1600 47.0 33.4 13.20 11.50
TCHD60S4(3,4)S3 1600 - 2000 21,24 FC/MC62 1800 57.0 39.5 13.00 11.00
1. Requires a 2FD06700224 Blower Time Delay unless a standard furnace is equipped with one.
** Refer to Quick Selection Chart for specific furnace match-up.

556723-UTG-A-0210
Johnson Controls Unitary Products 7
COOLING CAPACITY - With High Efficiency Motor Furnaces
UNIT
MODEL
FURNACE
MODEL
COIL
MODEL1W
COOLING
RATED
CFM
Net MBH SEER EER
TOTAL SENS.
13 SEER AC WITH VARIABLE SPEED FURNACES2
TCHD30S4(3,4)S3
T*(8,L)X*A12 FC/MC/PC30A 14 1065 28.2 21.1 14.05 12.50
T*(8,L)X*B12 FC/MC/PC30B 17 945 27.8 20.3 14.50 12.75
T*9X*B12 FC/MC/PC30B 17 1065 28.2 21.1 14.25 12.50
T*(8,L)X*A12 FC/MC/PC32A 14 970 28.0 20.7 13.65 12.25
T*(8,L)X*B12 FC/MC/PC35B 17 1090 28.4 21.6 14.50 12.75
T*(8,L)X*C16 FC/MC/PC35C 21 1090 28.4 21.6 14.75 13.00
T*(8,L)X*C20 FC/MC/PC35C 21 850 27.8 20.1 14.75 13.00
T*9X*B12 FC/MC/PC35B 17 1085 28.2 21.4 14.25 12.75
T*9X*C16 FC/MC/PC35C 21 1075 28.4 21.5 14.75 13.00
T*(8,L)X*A12 FC/MC/PC36A 14 995 28.2 20.7 14.00 12.25
T*(8,L)X*B12 FC/MC/PC36B 17 1075 28.4 21.5 14.50 12.50
T*(8,L)X*C16 FC/MC/PC36C 21 1090 28.4 21.2 14.75 13.00
T*(8,L)X*C20 FC/MC/PC36C 21 890 28.0 20.3 15.00 13.00
T*9X*B12 FC/MC/PC36B 17 1070 28.4 21.3 14.50 12.50
T*9X*C16 FC/MC/PC36C 21 1070 28.4 21.3 14.50 12.75
T*(8,L)X*A12 FC/MC/PC37A 14 1105 28.8 22.2 14.50 13.00
T*(8,L)X*B12 FC/MC/PC42B 17 1045 27.8 20.9 14.25 12.25
T*(8,L)X*C20 FC/MC/PC42C 21 920 27.0 19.9 14.50 12.50
T*9X*B12 FC/MC/PC42B 17 1045 27.8 20.9 14.25 12.25
T*9X*C16 FC/MC/PC42C 21 1035 27.6 20.3 14.25 12.25
T*(8,L)X*B12 FC/MC/PC43B 17 1115 28.8 21.6 14.25 12.25
T*(8,L)X*C20 FC/MC/PC43C 21 870 26.4 21.3 14.50 12.50
T*9X*B12 FC/MC/PC43B 17 1095 28.8 21.6 14.25 12.25
T*9X*C16 FC/MC/PC43C 21 1055 28.8 21.1 14.25 12.25
T*(8,L)X*C20 FC/MC/PC48C 21 890 28.8 20.9 15.50 13.50
T*9X*C16 FC/MC/PC48C 21 1075 29.4 22.6 15.25 13.25
T*(8,L)X*A12 HD36 14 1065 28.0 21.0 14.00 12.50
T*(8,L)X*B12 HD36 17 1065 28.0 21.0 14.00 12.50
T*(8,L)X*C16 HD36 21 1065 28.2 21.1 14.00 12.75
T*9X*B12 HD36 17 1065 28.0 21.0 14.00 12.50
T*(8,L)X*A12 UC30A 14 1065 28.2 21.3 14.00 12.50
T*(8,L)X*B12 UC30B 17 945 28.0 20.5 14.50 12.75
T*9X*B12 UC30B 17 1065 28.2 21.3 14.30 12.50
T*(8,L)X*A12 UC36A 14 995 26.8 19.5 13.50 11.75
T*(8,L)X*B12 UC36B 17 1065 28.2 21.3 14.50 12.50
T*(8,L)X*C16 UC36C 21 1075 28.4 21.3 14.75 12.75
T*(8,L)X*C20 UC36C 21 890 26.6 19.4 14.25 12.25
T*9X*B12 UC36B 17 1070 28.2 21.3 14.50 12.50
T*9X*C16 UC36C 21 1070 28.4 21.3 14.50 12.75
T*(8,L)X*B12 UC42B 17 1025 27.2 20.3 13.75 12.00
T*(8,L)X*C16 UC42C 21 825 26.0 18.2 14.25 12.25
T*(8,L)X*C20 UC42C 21 950 27.0 19.5 14.50 12.50
T*9X*B12 UC42B 17 1025 27.2 20.3 13.75 12.00
T*9X*C16 UC42C 21 1030 27.4 20.3 14.00 12.25
T*(8,L)X*C16 UC48C 21 815 26.4 18.9 14.50 12.50
T*(8,L)X*C20 UC48C 21 960 27.4 20.1 14.75 12.75
T*9X*C16 UC48C 21 1035 27.6 20.7 14.25 12.25
Y*(8,L)C*A12 FC/MC/PC30A 14 1055 28.2 21.4 14.05 12.40
Y*(8,L)C*B12 FC/MC/PC30B 17 955 28.2 21.0 15.00 13.15
Y*9C*B12 FC/MC/PC30B 17 1050 28.2 21.2 14.50 12.75
For notes see Page 12.

556723-UTG-A-0210
8Johnson Controls Unitary Products
TCHD30S4(3,4)S3
Y*(8,L)C*A12 FC/MC/PC32A 14 1045 28.0 21.0 13.65 12.10
Y*(8,L)C*B12 FC/MC/PC35B 17 995 28.4 21.2 14.50 13.00
Y*9C*B12 FC/MC/PC35B 17 1045 28.2 21.6 14.25 12.50
Y*(8,L)C*C16 FC/MC/PC35C 21 1025 28.4 21.4 15.00 13.15
Y*(8,L)C*C20 FC/MC/PC35C 21 1080 28.8 22.2 15.05 13.20
Y*9C*C16 FC/MC/PC35C 21 1005 28.4 21.4 15.00 13.10
Y*9C*C20 FC/MC/PC35C 21 985 28.4 21.4 15.00 13.10
Y*(8,L)C*A12 FC/MC/PC36A 14 1000 28.2 21.0 14.50 12.75
Y*(8,L)C*B12 FC/MC/PC36B 17 985 28.4 21.0 14.80 13.05
Y*9C*B12 FC/MC/PC36B 17 985 28.4 21.0 14.70 13.00
Y*(8,L)C*C16 FC/MC/PC36C 21 1020 28.4 21.2 15.00 13.15
Y*(8,L)C*C20 FC/MC/PC36C 21 1055 28.8 21.8 15.20 13.35
Y*9C*C16 FC/MC/PC36C 21 1005 28.4 21.2 15.00 13.20
Y*9C*C20 FC/MC/PC36C 21 1045 28.4 21.0 14.75 13.05
Y*(8,L)C*A12 FC/MC/PC37A 14 980 28.8 21.6 14.50 12.80
Y*(8,L)C*B12 FC/MC/PC43B 17 990 28.8 21.8 15.00 13.20
Y*9C*B12 FC/MC/PC43B 17 1035 28.8 21.6 14.50 12.85
Y*(8,L)C*C16 FC/MC/PC43C 21 990 29.0 21.8 15.35 13.60
Y*(8,L)C*C20 FC/MC/PC43C 21 1000 29.0 21.8 15.40 13.65
Y*9C*C16 FC/MC/PC43C 21 1030 28.8 21.6 14.80 13.15
Y*9C*C20 FC/MC/PC43C 21 995 29.0 21.8 15.20 13.45
Y*(8,L)C*A12 HC30 14 1030 27.6 20.6 13.50 12.00
Y*(8,L)C*B12 HC36 17 995 28.4 21.2 14.50 13.00
Y*9C*B12 HC36 17 1045 28.2 21.6 14.30 12.50
Y*(8,L)C*C16 HC42 21 990 29.0 21.8 15.35 13.60
Y*(8,L)C*C20 HC42 21 1000 29.0 21.8 15.40 13.65
Y*9C*C16 HC42 21 1030 28.8 21.8 14.80 13.15
Y*9C*C20 HC42 21 995 29.0 21.8 15.20 13.45
Y*(8,L)C*A12 HD36 14 1000 28.0 20.2 14.30 12.65
Y*(8,L)C*B12 HD36 17 985 28.0 20.4 14.65 13.00
Y*(8,L)C*C16 HD36 21 1020 28.2 20.4 14.80 13.05
Y*(8,L)C*C20 HD36 21 1055 28.4 21.0 15.00 13.25
Y*9C*B12 HD36 17 985 28.0 20.4 14.60 12.85
Y*9C*C16 HD36 21 1005 28.2 20.4 14.85 13.05
Y*9C*C20 HD36 21 1045 28.0 20.4 14.65 13.00
Y*(8,L)C*A12 UC30A 14 1055 28.2 21.6 14.00 12.40
Y*(8,L)C*B12 UC30B 17 955 28.4 21.0 15.00 13.20
Y*9C*B12 UC30B 17 1000 28.2 20.8 14.30 12.70
Y*(8,L)C*A12 UC36A 14 1000 28.2 20.8 14.30 12.70
Y*(8,L)C*B12 UC36B 17 985 28.2 21.0 14.65 13.00
Y*9C*B12 UC36B 17 985 28.2 21.0 14.55 13.00
Y*(8,L)C*C16 UC36C 21 1020 28.4 21.0 14.80 13.10
Y*(8,L)C*C20 UC36C 21 1035 27.8 21.0 14.75 13.00
Y*9C*C16 UC36C 21 1000 28.4 21.0 14.80 13.10
Y*9C*C20 UC36C 21 1045 28.2 21.0 14.65 13.00
For notes see Page 12.
COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued)
UNIT
MODEL
FURNACE
MODEL
COIL
MODEL1W
COOLING
RATED
CFM
Net MBH SEER EER
TOTAL SENS.
13 SEER AC WITH VARIABLE SPEED FURNACES2

556723-UTG-A-0210
Johnson Controls Unitary Products 9
TCHD36S4(3,4)S3
T*(8,L)X*A12 FC/MC/PC32A 14 1160 32.6 23.6 13.45 11.50
T*(8,L)X*B12 FC/MC/PC35B 17 1275 33.4 24.8 13.55 11.75
T*(8,L)X*C16 FC/MC/PC35C 21 1105 33.6 24.3 14.20 12.25
T*(8,L)X*C20 FC/MC/PC35C 21 1225 33.8 24.9 14.25 12.25
T*9X*B12 FC/MC/PC35B 17 1265 33.4 24.8 13.65 11.75
T*9X*C16 FC/MC/PC35C 21 1270 33.6 25.0 14.00 12.00
T*9X*C20 FC/MC/PC35C 21 1195 33.6 24.3 13.80 12.00
T*(8,L)X*A12 FC/MC/PC36A 14 1185 33.0 24.1 13.25 11.50
T*(8,L)X*B12 FC/MC/PC36B 17 1255 33.2 24.5 13.50 11.75
T*(8,L)X*C16 FC/MC/PC36C 21 1100 33.2 23.7 14.00 12.00
T*(8,L)X*C20 FC/MC/PC36C 21 1265 33.6 24.8 14.25 12.25
T*9X*B12 FC/MC/PC36B 17 1245 33.2 24.7 13.50 11.50
T*9X*C16 FC/MC/PC36C 21 1265 33.6 25.1 13.75 12.00
T*9X*C20 FC/MC/PC36C 21 1195 33.2 24.3 13.75 12.00
T*(8,L)X*A12 FC/MC/PC37A 14 1290 33.0 24.8 14.05 12.00
T*(8,L)X*B12 FC/MC/PC42B 17 1160 32.4 23.7 13.50 11.75
T*(8,L)X*C16 FC/MC/PC42C 21 1200 32.6 23.7 14.00 12.00
T*(8,L)X*C20 FC/MC/PC42C 21 1240 33.0 24.3 14.25 12.00
T*9X*B12 FC/MC/PC42B 17 1235 32.8 24.1 13.50 11.50
T*9X*C16 FC/MC/PC42C 21 1235 32.8 24.1 13.75 11.50
T*9X*C20 FC/MC/PC42C 21 1185 32.4 23.5 13.50 11.50
T*(8,L)X*B12 FC/MC/PC43B 17 1300 34.2 25.7 14.00 12.00
T*(8,L)X*C16 FC/MC/PC43C 21 1175 34.4 25.3 14.75 12.50
T*(8,L)X*C20 FC/MC/PC43C 21 1250 34.6 26.1 15.00 12.50
T*9X*B12 FC/MC/PC43B 17 1270 34.2 25.7 14.00 12.00
T*9X*C16 FC/MC/PC43C 21 1260 34.2 25.9 14.20 12.25
T*9X*C20 FC/MC/PC43C 21 1185 34.2 25.3 14.65 12.25
T*(8,L)X*C16 FC/MC/PC48C 21 1185 34.8 25.9 15.10 12.75
T*(8,L)X*C20 FC/MC/PC48C 21 1270 35.2 26.4 15.00 12.75
T*9X*C16 FC/MC/PC48C 21 1280 35.0 26.3 14.50 12.50
T*9X*C20 FC/MC/PC48C 21 1205 34.6 25.7 14.55 12.50
T*9X*D20 FC/MC/PC48D 24 1240 34.8 25.7 14.75 12.50
T*(8,L)X*A12 HD36 14 1270 33.2 24.2 13.40 11.75
T*(8,L)X*B12 HD36 17 1270 33.2 24.2 13.70 11.75
T*9X*B12 HD36 17 1270 33.4 24.4 13.85 11.75
T*(8,L)X*C16 HD48 21 1120 34.2 24.9 14.00 12.50
T*(8,L)X*C20 HD48 21 1245 34.8 26.0 14.00 12.75
T*9X*C20 HD48 21 1245 34.8 26.0 14.00 12.75
T*9X*D20 HD48 24 1260 34.8 26.3 14.00 12.75
T*(8,L)X*B12 UC36B 17 1205 32.0 23.5 13.00 11.00
T*(8,L)X*C16 UC36C 21 1180 32.4 23.7 13.75 11.75
T*(8,L)X*C20 UC36C 21 1225 32.6 24.5 13.75 11.75
T*9X*B12 UC36B 17 1195 31.8 23.5 13.00 11.00
T*9X*C16 UC36C 21 1205 32.0 23.5 13.00 11.25
T*9X*C20 UC36C 21 1195 32.2 23.7 13.25 11.50
T*(8,L)X*B12 UC42B 17 1215 32.4 23.3 13.00 11.25
T*(8,L)X*C16 UC42C 21 1170 32.4 23.1 13.75 11.75
T*(8,L)X*C20 UC42C 21 1225 32.6 23.7 13.75 11.75
T*9X*B12 UC42B 17 1215 32.4 23.5 13.00 11.25
T*9X*C16 UC42C 21 1215 32.4 23.5 13.25 11.50
For notes see Page 12.
COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued)
UNIT
MODEL
FURNACE
MODEL
COIL
MODEL1W
COOLING
RATED
CFM
Net MBH SEER EER
TOTAL SENS.
13 SEER AC WITH VARIABLE SPEED FURNACES2

556723-UTG-A-0210
10 Johnson Controls Unitary Products
TCHD36S4(3,4)S3
T*9X*C20 UC42C 21 1185 32.6 23.5 13.50 11.50
T*(8,L)X*C16 UC48C 21 1185 32.8 23.9 14.25 12.00
T*(8,L)X*C20 UC48C 21 1245 33.2 24.7 14.00 12.00
T*9X*C16 UC48C 21 1240 33.0 24.3 13.50 11.75
T*9X*C20 UC48C 21 1205 32.6 23.7 13.75 11.75
T*9X*D20 UC48D 24 1225 32.6 23.7 13.75 11.75
Y*(8,L)C*A12 FC/MC/PC32A 14 1045 32.6 23.0 13.45 11.70
Y*(8,L)C*B12 FC/MC/PC35B 17 1220 33.4 24.6 13.55 11.75
Y*9C*B12 FC/MC/PC35B 17 1190 33.4 24.6 13.65 11.85
Y*(8,L)C*C16 FC/MC/PC35C 21 1235 33.6 24.8 14.20 12.30
Y*(8,L)C*C20 FC/MC/PC35C 21 1170 33.8 24.8 14.50 12.55
Y*9C*C16 FC/MC/PC35C 21 1215 33.6 24.8 14.05 12.15
Y*9C*C20 FC/MC/PC35C 21 1275 34.2 25.4 13.80 12.00
Y*(8,L)C*A12 FC/MC/PC36A 14 1190 33.2 24.2 13.55 11.70
Y*(8,L)C*B12 FC/MC/PC36B 17 1220 33.2 24.2 13.85 12.00
Y*9C*B12 FC/MC/PC36B 17 1165 33.4 24.2 14.00 12.05
Y*(8,L)C*C16 FC/MC/PC36C 21 1235 33.4 24.4 14.30 12.30
Y*(8,L)C*C20 FC/MC/PC36C 21 1240 33.6 24.4 14.50 12.40
Y*9C*C16 FC/MC/PC36C 21 1185 33.6 24.4 14.35 12.35
Y*9C*C20 FC/MC/PC36C 21 1270 34.0 25.2 14.00 12.10
Y*(8,L)C*A12 FC/MC/PC37A 14 980 33.0 23.0 14.05 12.15
Y*(8,L)C*B12 FC/MC/PC43B 17 1210 34.2 25.2 14.00 12.10
Y*9C*B12 FC/MC/PC43B 17 1200 34.2 25.2 14.00 12.10
Y*(8,L)C*C16 FC/MC/PC43C 21 1205 34.4 25.4 14.75 12.70
Y*(8,L)C*C20 FC/MC/PC43C 21 1190 34.6 25.4 15.00 12.85
Y*9C*C16 FC/MC/PC43C 21 1240 34.2 25.2 14.20 12.25
Y*9C*C20 FC/MC/PC43C 21 1200 34.4 25.4 14.65 12.60
Y*(8,L)C*C16 FC/MC/PC48C 21 1210 35.0 26.0 15.10 13.00
Y*(8,L)C*C20 FC/MC/PC48C 21 1155 35.2 26.0 15.35 13.20
Y*9C*C16 FC/MC/PC48C 21 1195 35.0 25.8 14.85 12.80
Y*9C*C20 FC/MC/PC48C 21 1315 35.2 26.8 14.55 12.55
Y*9C*D20 FC/MC/PC48D 24 1240 35.2 26.2 15.00 13.00
Y*(8,L)C*B12 HC36 17 1220 33.4 24.4 13.55 11.80
Y*9C*B12 HC36 17 1190 33.2 24.0 13.60 11.75
Y*(8,L)C*C16 HC42 21 1205 34.6 25.4 14.75 12.75
Y*(8,L)C*C20 HC42 21 1190 34.6 25.6 15.00 13.00
Y*9C*C16 HC42 21 1240 34.4 25.2 14.25 12.30
Y*9C*C20 HC42 21 1200 34.6 25.4 14.65 12.65
Y*9C*D20 HC60 24 1225 33.6 24.8 14.50 12.45
Y*(8,L)C*A12 HD36 14 1190 33.2 23.4 13.40 11.70
Y*(8,L)C*B12 HD36 17 1220 33.2 23.6 13.70 12.00
Y*(8,L)C*C16 HD36 21 1235 33.4 23.6 14.15 12.30
Y*(8,L)C*C20 HD36 21 1240 33.6 23.6 14.30 12.40
Y*9C*B12 HD36 17 1165 33.4 23.6 13.85 12.05
Y*9C*C16 HD36 21 1185 33.4 23.6 14.20 12.35
Y*9C*C20 HD36 21 1265 33.8 24.6 13.85 12.05
Y*(8,L)C*B12 HD48 17 1210 34.6 25.2 14.50 12.45
Y*(8,L)C*C16 HD48 21 1210 34.8 25.4 15.00 13.00
Y*(8,L)C*C20 HD48 21 1155 34.8 25.4 15.20 13.05
Y*9C*B12 HD48 17 1150 34.4 25.2 14.25 12.35
Y*9C*C16 HD48 21 1195 34.6 25.2 14.70 12.70
For notes see Page 12.
COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued)
UNIT
MODEL
FURNACE
MODEL
COIL
MODEL1W
COOLING
RATED
CFM
Net MBH SEER EER
TOTAL SENS.
13 SEER AC WITH VARIABLE SPEED FURNACES2