Joico JOV-14A User manual

Sofa Set
W
A
R
R
A
N
T
Y
1
Y
E
A
R
1
Happy?
Please leave us a review!
You can make others happy too!

IMPORTANT, RETAIN FOR
FUTURE REFERENCE:
READ CAREFULLY.
Safety
For domestic use only.
Don't tighten all the bolts before the product is fully assembled.



Periodic structural checks of this product should be
It would be useful to ask someone to help you assemble
the product.
undertaken, do not use if you have any doubts about its
Do not stand on the seat and table.
Do not sit on the armrest and table.
Do not let children play with this product.
Maximum load per seat: 250 lbs.
At the beginning of the season

product are secure, do not use if you have any doubts
At the end of the season
This product should be stored under cover during
prolonged spells of adverse weather (wet or cold) and
also during the winter (ideally in a garden shed or
garage).
Always clean and dry thoroughly before storage.
- 1 -

Tips for Cushions
1
3
OK
2
In order to compress the package, we put the cushions in
the gap of some parts. So there may be crinkle on the fabric.
Don’t worry. Just flap every corner of the cushion evenly and
it will get back into its original shape soon.
- 2 -

- 3 -
Item
no.
Reference
Image Description Qty.
A1
B1
C
K1
G
L
M
N
E
F
Back
Right Armrest
Side Panel
Side Panel
M6*35
Head Cap Screws
Washer
COMPONENT LIST - RIGHT CORNER SOFA
Seat Base
1
1
1
1
1
14
1
2
14
1
Back Cushion
Allen Key
Seat Cushion

NOTE:
Do NOT tighten any screws fully first until you have tightened all the
screws.
This may cause the frame to warp.
If there is still wobbles or screw holes cannot be aligned, loosen the
screws and tighten sequentially.
If the Sofa is not stable it could lead to damage to the product.
Attach the Seat Base (C) to the Side Panel (K1) by securing with M6*35 Head
Cap Screws (L) and Washers (M). Do this in 3 places.
1
- 4 -
x3
NOTE:DO NOT TIGHTEN THE SCREWS COMPLETELY.
X3
L
K1
C
M

Attach the Right Armrest (B1) to the Side Panel (K1) by securing with M6*35
Head Cap Screws (L) and Washers (M). Do this in 2 places.
2
- 5 -
x2
NOTE:DO NOT TIGHTEN THE SCREWS COMPLETELY.
X2
K1
C
B1
L
M

x2
NOTE:DO NOT TIGHTEN THE SCREWS COMPLETELY.
- 6 -
3
Attach the Side Panel (G) to the Side Panel (K1) by securing with M6*35
Head Cap Screws (L) and Washers (M). Do this in 2 places.
X2
K1
C
B1
G
LM

x7
NOTE:DO NOT TIGHTEN THE SCREWS COMPLETELY.
- 7 -
4
Attach the Back (A1) to the Seat Base (C) and the Side Panel (G) and the
Right Armrest (B1) by securing with M6*35 Head Cap Screws (L) and
Washers (M). Do this in 7 places.
X7
L
M
K1
B1
A1
CG

- 8 -
E
F
Tighten all 14 Screws into place with Allen Key (N).
Place the Sofa on a level surface.
Place Back Cushions (E)and Seat Cushion (F) on the sofa and your sofa
is ready for use.
5
6
x14
NOTE:IF ANY SCREW HOLES CANNOT BE ALIGNED, LOOSEN ALL
THE SCREWS AND GO BACK STEP 1 AND RESTART ASSEMBLY.
x14
N

Item
no.
Reference
Image Description Qty.
A
B
C
K
G
L
M
N
E
F
Back
Left Armrest
Side Panel
Side Panel
M6*35
Head Cap Screws
Washer
COMPONENT LIST - LEFT CORNER SOFA
Seat Base
1
1
1
1
1
14
1
2
14
1
Back Cushion
Allen Key
Seat Cushion
- 9 -

NOTE:
Do NOT tighten any screws fully first until you have tightened all the
screws.
This may cause the frame to warp.
If there is still wobbles or screw holes cannot be aligned, loosen the
screws and tighten sequentially.
If the Sofa is not stable it could lead to damage to the product.
Attach the Seat Base (C) to the Side Panel (K) by securing with M6*35 Head
Cap Screws (L) and Washers (M). Do this in 3 places.
1
x3
NOTE:DO NOT TIGHTEN THE SCREWS COMPLETELY.
- 10 -
X3
L
C
K
M

Attach the Left Armrest (B) to the Side Panel (K) by securing with M6*35 Head
Cap Screws (L) and Washers (M). Do this in 2 places.
2
x2
NOTE:DO NOT TIGHTEN THE SCREWS COMPLETELY.
- 11 -
X2
L
C
B
K
M

x2
NOTE:DO NOT TIGHTEN THE SCREWS COMPLETELY.
3
Attach the Side Panel (G) to the Side Panel (K) by securing with M6*35
Head Cap Screws (L) and Washers (M). Do this in 2 places.
- 12 -
X2
K
L
GC
M

x7
NOTE:DO NOT TIGHTEN THE SCREWS COMPLETELY.
4
Attach the Back (A) to the Seat Base (C) and the Side Panel (G) and the
Left Armrest (B) by securing with M6*35 Head Cap Screws (L) and
Washers (M). Do this in 7 places.
- 13 -
X7
K
G C
A
B
L
M

- 14 -
E
F
Tighten all 14 Screws into place with Allen Key (N).
Place the Sofa on a level surface.
Place Back Cushions (E) and Seat Cushion (F) on the sofa and your
sofa is ready for use.
5
6
x14
NOTE:IF ANY SCREW HOLES CANNOT BE ALIGNED, LOOSEN ALL
THE SCREWS AND GO BACK STEP 1 AND RESTART ASSEMBLY.
x14
N

Item
no.
Reference
Image Description Qty.
A
D
C
K
G
L
M
N
E
F
Back
Left Armrest
Side Panel
Side Panel
M6*35
Head Cap Screws
Washer
COMPONENT LIST - MIDDLE CORNER SOFA
Seat Base
1
1
1
1
1
14
1
3
14
1
Back Cushion
Allen Key
Seat Cushion
- 15 -

NOTE:
Do NOT tighten any screws fully first until you have tightened all the
screws.
This may cause the frame to warp.
If there is still wobbles or screw holes cannot be aligned, loosen the
screws and tighten sequentially.
If the Sofa is not stable it could lead to damage to the product.
Attach the Seat Base (C) to the Side Panel (K) by securing with M6*35 Head
Cap Screws (L) and Washers (M). Do this in 3 places.
1
x3
NOTE:DO NOT TIGHTEN THE SCREWS COMPLETELY.
- 16 -
X3
M
L
K
C

Attach the Left Armrest (D) to the Side Panel (K) by securing with M6*35 Head
Cap Screws (L) and Washers (M). Do this in 2 places.
2
x2
NOTE:DO NOT TIGHTEN THE SCREWS COMPLETELY.
- 17 -
X2
M
L
K
C
D

x2
NOTE:DO NOT TIGHTEN THE SCREWS COMPLETELY.
3
Attach the Side Panel (G) to the Side Panel (K) by securing with M6*35
Head Cap Screws (L) and Washers (M). Do this in 2 places.
- 18 -
X2
M
L
GC
D
K

x7
NOTE:DO NOT TIGHTEN THE SCREWS COMPLETELY.
4
Attach the Back (A) to the Seat Base (C) and the Side Panel (G) and the
Left Armrest (D) by securing with M6*35 Head Cap Screws (L) and
Washers (M). Do this in 7 places.
- 19 -
X7
ML
M
L
D
K
C
G
A