JONATHAN Y RCK200 User manual

A
B
C
D
E
2
1
1
1
1
6
10
1
G
H
I
Chair Side
Chair Back Top
Chair Front Down
Chair Back Down
Seating Base
F 2Rocking Legs
Allen Bolt (70 mm)
Allen Bolt (40 mm)
Allen Key
4 mm
12 mm
6 mm
70 mm
4 mm
12 mm
6 mm
40 mm
PIECE QTYDESCRIPTION PICTURE PIECE QTYDESCRIPTION PICTURE
12J Wood Plug
Model # : RCK200
Product Dimensions : W23.23" x D39.37" x H37.60"
CARE AND MAINTENANCE
NOTICE & IMPORTANT SAFETY INSTRUCTIONS
with a clean and dry cloth. This ratan basket requires no maintenance.
However, by keeping the furniture clean and storing it properly you can enjoy it year
a�er year.
* Please make sure that you have all parts indicated before you begin assembly of this item.
* This it face to prevent scratching the finish during assembly.
* This Item may requir th ening.
WARNING
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR
OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN
INSTALLED.
Part List and Hardware List
1K Cushion
4L Screw (40 mm)

G
H
H
H
H
H
H
H
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware content list.
If any parts is missing or damaged, do not a empt to assemble the product.
Es ted assembly �me 20 minutes.
STEP 6 : STEP 7 :
STEP MOUNT 1 SIDE PART TO BACK TOP PART USING 2 BOLTS
(TOP BOLT 70x6 MM, DOWN BOLT 40x6 MM).
MOUNT BACK DOWN PART TO 1 SIDE PART USING
2 BOLTS (40X6 MM).
MOUNT FRONT DOWN PART TO 1 SIDE PART USING
2 BOLTS (40X6 MM).
MOUNT 2nd SIDE PART TO BACK TOP (TOP
BOLT 70x6 MM, DOWN BOLT 40x6 MM), BACK
DOWN (BOLT 40X6 MM) & FRONT DOWN (BOLT 40X6 MM).
1 :
STEP PUT SEATING FRAME DOWN ON THE CHAIR.
FIX THE SEAT BASE WITH WOODEN SCREW 40 MM
FROM THE BOTTOM ON EACH 4 CORNER.
MOUNT ROCKING LEGS FOR EACH SIDE USING
4 BOLTS (70X6 MM).
PUT IN WOOD PLUG TO COVER THE HOLE RATTAN. STEP 8 : PUT THE CUSHION ON TOP OF THE
SEAT PART.
THE CHAIR IS READY.
4 :
STEP 2 : STEP 3 : STEP 4 :
G
H
H
H
G
G
G
G
1. 2. 3. 4.
5. 6. 7. 8.