JONATHAN Y JYL5037A User manual

WARNING
WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A LICENSED ELECTRICIAN.
WARNING *** SWITCH OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN FUSE BOX/CIRCUIT
BREAKER BEFORE INSTALLATION.
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE O
R
Model# JYL5037A
Product Dimensions: 13"L X 13"W X 26.75"H
INSPECT
ITEM
CAREFULLY
BEFORE
ATTEMPTING
TO
INSTALL.
IF
THERE
IS
ANY
DAMAGE
OR
OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
CARE AND MAINTENANCE
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate
vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to
the material Avoid the use of chemicals and household cleaners as they may damage the finish
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* T d th i k f fi l t i l h k i j t t l f ll th id li b l
th
e ma
t
er
i
a
l
.
A
vo
id
th
e use o
f
c
h
em
i
ca
l
s an
d
h
ouse
h
o
ld
c
l
eaners as
th
ey may
d
amage
th
e
fi
n
i
s
h
.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below
for safe use and installation
*The external flexible cable or cord of this luminaire cannot be replaced;
If the cord is damaged, the luminaire shall be destroyed
**
This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce the risk of
This
portable
lamp
has
a
polarized
plug
(one
blade
is
wider
than
the
other)
as
a
safety
feature
to
reduce
the
risk
of
electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in the outlet, reverse the
plug, if it still does not fit, contact a qualified electrician. Never use with an extension cord unless the plug can be
fully inserted. do not attempt to defeat this safety feature.
Part List and Hardware List
PIECE DESCRIPTION PICTURE QUANTITY PIECE DESCRIPTION PICTURE QUANTITY
A
Lam
p
base 1
X
E Shade 1
X
at sta d ad ae st
A
Lamp
base
1X
E
Shade
1X
B Saddle 1X F Finial 1X
C Socket 1X G Bulb 1X
D Harp 1X

Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If
any part is missing or damaged, do not attempt to assemble the product.
E ti t d A bl Ti 6 i t
PREPARATION
Estimated Assembly Time: 6 minutes.
PLEASE USE ON/OFF TYPE"A" BULB MAX 100-WATT OR CFL BULB MAX 23-WATT OR LED BULB MAX 12-WATT
THERE IS LED 9-WATT BULB IN THE BOX ”
11123
Step 1 Step2 Step3
Insert the Harp (D) into the Saddle (B). Insert the bulb(G） into the socket(C). Put the light on a level surface to check
Put the shade(E) on the Harp(D), then if everything is stable.
tighten the Finial (F)into the Harp (D)
ENJOY YOUR LAMP