JONATHAN Y JYL6005A User manual

WARNING
WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A LICENSED ELECTRICIAN.
WARNING *** SWITCH OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN FUSE BOX/CIRCUIT
BREAKER BEFORE INSTALLATION.
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR
OBVIOUS DEFECT DO NOT INSTALL ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED
Model# JYL6005A /JYL6005B
Product Dimensions: 15.75"L X 15.75"W X
60"H
OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
CARE AND MAINTENANCE
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate
vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to
the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below
for safe use and installation
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
for
safe
use
and
installation
*The external flexible cable or cord of this luminaire cannot be replaced;
If the cord is damaged, the luminaire shall be destroyed
**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce
the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in
the outlet reverse the plug if it still does not fit contact a qualified electrician Never use with an extension
PIECE DESCRIPTION PICTURE QUANTIT
Y
PIECE DESCRIPTION PICTURE QUANTIT
Y
the
outlet
,
reverse
the
plug
,
if
it
still
does
not
fit
,
contact
a
qualified
electrician
.
Never
use
with
an
extension
cord unless the plug can be fully inserted. do not attempt to defeat this safety feature.
Part List and Hardware List
PIECE
DESCRIPTION
PICTURE
QUANTITY
PIECE
DESCRIPTION
PICTURE
QUANTITY
A Lamp Base 1X F socket ring 1X
B tube 1X G Bulb 1X
C tube 1X H Shade 1X
D tube 1X I cord and
switch 1X
E
h
1X
E harp 1X

Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware
contents list. If any part is missing or damaged, do not attempt to assemble the product.
PREPARATION
contents
list
.
If
any
part
is
missing
or
damaged
,
do
not
attempt
to
assemble
the
product
.
Estimated Assembly Time: 6 minutes.
PLEASE USE ON/OFF TYPE"A" BULB MAX 100-WATT OR CFL BULB MAX23-WATT OR LED BULB MAX 12-WATT
THERE IS LED 9-WATT BULB IN THE BOX
112
H
112
E
F
G
H
D
E
C
D
Ste
p
1 Ste
p
2
A
BI
Step
1
Step2
Put the lamp base(A)on the floor . Put the light on a level surface to check
Inster the tube(B,C)into the base in order
Gently pull the cord (I )and inster the tube(D)into the Tube(C) if every thing is stable.
Put the harp(E)onthe socket and tighten the socket ring(F).
A
Inster the bulb(G) in to the socket
Put the shade(H)on the harp(E).
ENJOY YOUR LAMP