JONATHAN Y Transitional JYL3029A User manual

WARNING
WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A LICENSED ELECTRICIAN.
WARNING *** SWITCH OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN FUSE BOX/CIRCUIT
BREAKER BEFORE INSTALLATION.
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL IF THERE IS ANY DAMAGE OR
Model# JYL3029A
Product Dimensions: 15.25"L X 6"W X
40 56 5"H
INSPECT
ITEM
CAREFULLY
BEFORE
ATTEMPTING
TO
INSTALL
.
IF
THERE
IS
ANY
DAMAGE
OR
OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
CARE AND MAINTENANCE
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate
vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to
40
~
56
.
5"H
* Please make sure that you have all parts indicated before you begin assembly of this item
*
This item should be assembled on a soft surface to prevent scratching the finish during assembly
p , y p pp p
the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
This
item
should
be
assembled
on
a
soft
surface
to
prevent
scratching
the
finish
during
assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below
for safe use and installation
*The external flexible cable or cord of this luminaire cannot be replaced;
If the cord is damaged, the luminaire shall be destroyed
** ( ) f f
**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce
the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in
the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an extension
cord unless the plug can be fully inserted. do not attempt to defeat this safety feature.
P t Li t d H d Li t
PIECE DESCRIPTION PICTURE QUANTIT
Y
PIECE DESCRIPTION PICTURE QUANTITY
dd
P
ar
t
Li
s
t
an
d
H
ar
d
ware
Li
s
t
A Lamp Base 1X D cor
d
an
d
switch 1X
B
lamp body
1X
E
Joint
1X
B
lamp
body
1X
E
Joint
1X
C shade 1X F Bulb 1X

Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware
contents list. If any part is missing or damaged, do not attempt to assemble the product.
PREPARATION
yp g g p p
Estimated Assembly Time: 6 minutes.
PLEASE USE ON/OFF TYPE"B" BULB MAX 40-WATT OR CFL BULB MAX 13-WATT OR LED BULB MAX 9-WATT
THERE IS LED 4-WATT BULB IN THE BOX
112
F
E
F
A
D
Step 1 Step2
Put the lamp base(A)on the floor . Put the light on a level surface to check
Gentl
y
p
ull the cord
(
D
)
and inster the lam
p
bod
y(
B
)
into the base
(
A
)
if ever
y
thin
g
is stable.
A
D
Gently
pull
the
cord
(D)and
inster
the
lamp
body(B)into
the
base(A)
if
every
thing
is
stable
.
Assembly the shade(C)on the socket.
Inster the bulb(F) in to the socket
Can loosen the joint(E)and heighten or shorter the lamp
ENJOY YOUR LAMP
ENJOY YOUR LAMP