Jovision JVS-D7216 User manual

JVS-D7216 Standalone DVR User Manual
1
Menu
JVS-D7216 Standalone DVR Instructions
1. Introduction………………………………………………………………………………………..4
1.1 Product Description………………………………………..……………………………….4
1.2 Features……………………………………………………………………………………..4
1.3 Specifications………………………………………………………………………………...4
2. Product Features………………………………………………………...……………………….6
2.1 Panel Instruction…………………………………………………….......……………………6
2.2 Ports Instruction……………………………………………………………………………….8
2.3 Remote-control Instruction…………………………………………………………………9
2.4 Video Standards……………………………………………………………………………...10
3. O/S Instructions…………………………..………………………………………………………11
3.1 Start/Close ..………………………………………………………..………………………...11
3.2 Previewing…………………………………………….. ………………………………….11
3.3 Menu Basic Operations………………………………………………………………………11
3.3.1 Enter Menu…………………………………....………………………………………11
3.3.2 Exit Menu………………………………………………………………...………….12
3.4 Main Functions…………………………………………………………………...…………12
3.5 Playback Recording Files……………………………………………………………………12
3.5.1 Files Searching………………………………………………………………………..13
3.5.2 Searching Result……………………………………………………………………...13
3.5.3 Playback Menu………………………………………………………………..……..13
3.6 Record………………………………………………………………………………………..14
3.7 PTZ…………………………………………………………………………………………..15
3.8 Menu Functions…………………………………………………………………………...…15
3.8.1 Tools……………………………………..…..………………………………………..15
3.8.1.1 HDD Management…………………………………………………………….16
3.8.1.2 Users Management……………………………….……………………………16
3.8.1.3 Restore Default Settings………………………………………………………17
3.8.1.4 Clear Alarm……………………………………………………………………17
3.8.1.5 Software Update ……………………………………….…………………...…17
3.8.1.6 Time Setting…………………………………………………………………...18
3.8.1.7 Version Information………………………………….……………………...18
3.8.2 System Settings……………………………………………………………………….18
3.8.2.1 System Setup…………………………………………………………………..18
3.8.2.2 Recording Setting……………………………………….……………………..20
3.8.2.3 Video Setting……………………………………….………………………….20
3.8.2.4 Alarm Input……………………………………………………………………22
3.8.2.5 Alarm Output………………………………………………………………….22

JVS-D7216 Standalone DVR User Manual
2
3.8.2.6 Schedule Recording…………………………………………………………...22
3.8.2.7 Network Settings………………………………………………………………23
3.8.2.8 PTZ Settings…………………………………….……………………………..24
3.8.2.9 Motion Detection……………………………………………………………...25
3.8.3 System Log…………………………………………………………………………...26
3.8.4 Shutdown……………………………………………………………………………..26
Client-end Software Instructions…………………………………………………………………....27
1. Surveillance System……………………………………………………….2 8
2. Code Stream Selection………………………………………………………………………29
3. PTZ Control…………………………………………………………………………………30
4. Advanced Settings…………………………………………….…………………………..…30
5. Configurations…………………………………….…………………………………………31
5.1 Server….…………………………………………………………………………...31
5.2 Channel…..…………………………………………………………………………32
5.3 Alarm…..…………………………………………………………………………...33
5.4 Users Info…..…………………………………….…………………………………34
5.5 Others…………………………………………………………………………………..35
6. Remote Playback……………………………………….……………………………………36

JVS-D7216 Standalone DVR User Manual
3
JVS-D7216 Standalone DVR Instructions
1. Introduction
1.1 Product Description
This standalone DVR uses an embedded processor and OS with advance network capabilities. This standalone DVR
serves as a digital video and audio recorder, plus digital video and audio server functions. It can work individually or
with other equipments to form a network. This DVR is perfect for small to medium business or residential applications.
1.2 Features
User friendly Linux operating system.
D1 previewing resolution and CIF compression resolution.
Supports 4/8/16 channel video and 2 channel audio.
Support snapshot during previewing and playback.
H. 264 compression standard and adjustable compression quality.
Supports adjustment of video quality.
Supports five monitor resolutions.
Supports PrivacyArea Functions.
Supports PTZ controls.
Supports alarm input and output.
Supports software updates.
Supports both static and dynamic IPs, PPPoE and remote link statistics.
Support Mobile Monitoring and PTZ controls from remote PC or Andriod/iPhone.
Supports system log and Admin rights.
Preview, PTZ control, playback and download remotely.

JVS-D7216 Standalone DVR User Manual
4
1.4 Specifications
Model JVS-D7216 JVS-D7216
OS Embedded Linux Embedded Linux
Video Standard PAL / NTSC PAL / NTSC
Compression
Standard
H.264 H.264
Recording Type Manual, Scheduled, Alarm, Motion Detection Manual, Scheduled, Alarm, Motion Detection
Searching records Time, Event, Channel, System Log Time, Event, Channel, System Log
Backup Type Network Backup, USB Backup, SATA
Backup
Network Backup, USB Backup, SATA
Backup
Video Input 4 Channels BNC 8 Channels BNC
Video Output 1 Channel BNC and 1 Channel VGA 1 Channel BNC and 1 Channel VGA
Audio Input 4 Channel BNC 8 Channel BNC
Audio Output 1 Channel BNC 1 Channel BNC
Previewing
Resolution
D1: 702x576PAL702x480NTSCD1: 702x576PAL702x480NTSC
Playback
Resolution
CIF: 352x288PAL352x240NTSCCIF: 352x288PAL352x240NTSC
Motion Detection Up to 4 independent detection area in each
channel, Multi-level sensitiviity.
Up to 4 independent detection area in each
channel, Multi-level sensitiviity.
Layout 1 and 4 Screens 1, 4 and 8 Screens
Total Frame Rate 100 fps (PAL), 120 fps (NTSC) 200 fps (PAL), 240 fps (NTSC)
Saving Records Local HDD and Remote Network Local HDD and Remote Network
Local Playback 1 Channel or 4 Channels Playback 1 Channel or 4 Channels Playback
Alarm Input Up to 32 Input Up to 32 Input
Alarm Output No Limit No Limit
PTZ Control RS485 RS485
HDD Port 2 SATA ports, Up to 2TB per one 2 SATA ports, Up to 2TB per one
Network Port RJ45 10M/100M Adjustment Port RJ45 10M/100M Adjustment Port
USB Port 2 USB 2 USB
Power 12V 5A 12V 5A
Size 340mm*332mm*56mm 340mm*332mm*56mm

JVS-D7216 Standalone DVR User Manual
5
2. Panel Instruction
3 Installation Instructions
Before installation, make sure your internet connection and power cable is plugged into the unit.
If you plan to use the DVR to record locally, an installed HDD is necessary. It is necessary to format the HDD. Menu 
System Settings HDD Format.

JVS-D7216 Standalone DVR User Manual
6
4. Mouse Instruction
A mouse can be used on either USB port.
The interface of DVR is similar to Windows. Left-click means selected or OK, and right-click means cancel or exit.
While previewing images, double left-click mouse to single-channel preview and double left-click again to return to
multi-channel preview.
When menu is shown on screen, right-click or click means close the menu window or exit.
5. Menu Structure
The menu includes check box, select box, edit box and buttons.
(1) Check box:“√”stands for valid and“□”stands for invalid.
(2) Select box: Left-click mouse.
(3) Edit box: Enter objective content in edit boxes.
a. Change input content by left-clicking “ ”.
(4) Buttons

JVS-D7216 Standalone DVR User Manual
7
JVS-D7216 DVR O/S Instructions
3.1 Previewing
The previewing interface will be shown after starting system. recording. this channel is set alarm, but is not
triggered. the alarm is triggered. client-end is linking this channel.
3.2 User Login
After starting system, right-click to log in.
The default Username is “abc”and Password is “123”. It is recommended to change your username and password in
User under System. Please make sure your “Local User” and “Net User” are the same.
If you forget your username and password you can send the S/N code and user information to Email Support to get a
temporary password.
3.4 Main Function

JVS-D7216 Standalone DVR User Manual
1
After login, right-click to enter the Main Menu.
System: System settings
PTZ Control: Control PTZ
Record: Record manually
Playback: Playback recording files
Network: Network settings
Snapshot: Snapshot while previewing and playback
Set Video: Adjust video images quality
3.5 System
System includes System Settings, Channel Settings, User Management, HDD Management, System Log, Software
Update, Snapshot Management and Alarm.
3.5.1 System Settings
Check “Show Time”, the time can be shown on screen. Time can be shown on top or bottom. Click “Save” to
become effective.
IR Device ID is the code for remote control. Only when the IR Device ID and remote control use the same code
will the remote function with the unit. Click “Save”.
Transparency: The smaller the value, more transparent. Click “Save” to become effective.

JVS-D7216 Standalone DVR User Manual
2
VGAResolution includes 800*600, 1024*768, 1280* 1024, 1280*768 and 1440*900.
Enabling WebServer allows the user to view remotely. Default port is 80, user can use IP address to view remotely.
If user changes other port, for example 88, user must add port number after IP address, for example
http://192.168.8.245:88. The detail IE surveillance instruction is according to 4.2 IE. Click “Save” to become
effective.
Enable Mobile Server allows the user to view remotely from a mobile phone. Image quality and FPS can be
adjusted according to bandwidth of phone internet. Image quality includes high, middle and low. FPS includes 30,
15, 8, 4 and 2. Click “Save” to become effective.
Enable Talk to let user allow any one channel to talk with client-end software. Click “Save” to become effective.
Language includes Chinese and English currently. More languages will be added. Click “Save” to become
effective.
Restore: Restore the whole system to be default settings.
Default: Restore the current page to be default settings.
3.5.2 Channel Settings

JVS-D7216 Standalone DVR User Manual
3
Choose different channel and set video standard (PAL/NTSC) according to the standard of cameras. Click “Apply
to All” to ensure changes effect all channels. “Save” to become effective.
Click “Show OSD” to manage if the OSD is shown at the top or bottom. Click “Save” to become effective.
Monitor Audio means enable audio while previewing. Click “Save” to become effective.
Record Audio enables audio while recording and playing back. Click “Save” to become effective.
File size can be adjusted between 100 MB/H and 500 MB/H. Click “Save” to become effective.
PTZ settings include Address, Protocol and Baud rate. Click “Save” to become effective. More PTZ order
exchange, as follows:
Schedule Record can be used to choose two scheduled times to record every day. Click “Save” to become effective.
Privacy Area setting is as follows:
Left-click the mouse to choose privacy area. Right-click to cancel the privacy area. Up tp 4 areas can be assigned.
After setting privacy area, click “Save” and “Exit” to save all settings.
3.5.3. User Management
Users include Local Users and Network Users. Login Users mean the users who can control the host-end and Network
Users means the users who can control and view remotely.
Click “Add” in User Management page to add new users
Input new user name
Input the password of new user

JVS-D7216 Standalone DVR User Manual
4
Set the rights of new user
Check privileges of new user
Click Add to save the settings of new user
Modify User
Left click the target user and change the information of the target user. Click “Modify” to save all changes.
Note: Only administrators can edit the rights of other users.
Delete User
Left click the target user and click “Delete” to delete the user.
3.5.4 HDD Management
HDD information includes Device, Capacity and Status. If status is normal, you can record and capture snapshots..
If status is unformatted, you will need to format HDD.
File Packed Time can be set between 5 and 99 minutes. If 60 minutes is set, the time period of every recording file
is 60 minutes.
3.5.5 System Log

JVS-D7216 Standalone DVR User Manual
5
System log can be recorded page by page. Page means current page. All means the total pages of system log. If you
want to check any page, enter the page number into the Goto box. / / / mean the first page, previous,
next and the end page.
System log can be backed up to USB Device. Notice: USB device needs to be FAT32 form.
3.5.6 Software Update
Notice: During update, do not stop power.
USB: Copy the newest software into a FAT32 form USB device, insert the USB device and click “Update”.
FTP: Copy the newest software into the root menu of FTP server, input the IP address of FTP server and click
“Update”. Notice: The FTP must support public user.
Website: Choose website and click “Update”. This method is suggested.
3.5.7 Picture Management

JVS-D7216 Standalone DVR User Manual
6
Choose channel No and time to search the snapshot pictures. / / / mean the first page, previous, next and the
end page.
3.5.8 Alarm Management
Alarm management includes alarm input and output.Alarm input includes Motion Detection and Alarm Input Module.
Motion Detection: Choose channel and Enable Motion Detection.

JVS-D7216 Standalone DVR User Manual
7
Alarm output actions include recording, buzzer, calling presets, sending message to client-end. The time of the alarm can
be set between 1 and 999 seconds. Alarm Output Module settings include address, baud rate and channel No.
3.6 PTZ Control
The main functions of “PTZ” includes: Direction control / / / , Iris control, Focus control, Zoom control and
PTZ speed. Adjusts the location of control panel.
Other functions (Click “More”): Preset and auxiliary functions of camera (Wiper and Lights).
3.7 Record

JVS-D7216 Standalone DVR User Manual
8
All / None: Start recording all channels / Stop recording all channels.
Notice: Before recording, make sure that HDD has been formatted. means recording.
3.8 Playback
Click “Playback” and the recording file list will be shown. Choose Channel, recording type and date to search the
recording files. The search results will be shown page by page. / / / mean the first page, previous page, next
page and the end page.
Backup to USB Device: Choose the target recording files and click “Backup to USB Device”. Notice: Make sure the
USB Device is atleast 2.0 speed and formatted in FAT32 and contains enough free space..
Play recording file: Choose the recording file and click “Play”.
Playback Tools Bar: The playback tool bar is shown at the bottom of interface. Right-click to show/hide the playback
tool bar.
Play:
Pause:

JVS-D7216 Standalone DVR User Manual
9
Play by Frame:
Slow Play:
Fast Play:
Sound On/Sound Off:
Apply to All:
3.9 Network Settings
Static:
Users can input IP, Subnet code, gateway and DNS directly. Click “Save” to become effective.
DHCP:
Enable DHCP to get a dynamic IP. The network configure information can be shown in configure boxes.
No. and Status:
Normally, the No. box shows No. and Status shows Normal. If the No. box shows A0, it means DVR does not
get No., and users need to System Setting Page to register the DVR online and restart DVR.
PPPoE:
Click “PPPoE” to set Username and Password of ADSL.
3.10 Snapshot

JVS-D7216 Standalone DVR User Manual
10
Choose the target channel and right click to show the Main Menu. Click “Snapshot” to capture picture. The system will
show “Channel # snapshot successfully” to note snapshot was taken.
3.11 Set Video
Choose the target channel and right click to show the Main Menu. Click “Set Video” to adjust the image effect.
Use and to adjust the relative parameters. Click to move the location of Video Setting box.
3.12 Shutdown
Right-click to show the Main Menu. Click Shutdown.
Logout: Unit will continue to record while logged out.
Shutdown: Turns the DVR unit off.
Restart: Restarts Unit.
Client-end Software Instruction
1. Introduction to JDCS
JDCS is remote viewing software “Client End” installed on your PC to access remotely.
Double-click the desktop icon to enter the login panel. The default username is “abc” and default

JVS-D7216 Standalone DVR User Manual
11
password is “123”.
Note: The User Name and Password should be the same as the User Name and Password in Network User of DVR
Settings.
After logging in, you will enter the main interface of JDCS.
2. JDCS Interface
2.1 System Menu Panel

JVS-D7216 Standalone DVR User Manual
12
Link All:Click to connect the client to local cameras. (Make sure you have configured network settings )
Link None:Disconnect from local cameras.
Recording: Click this button and you can record the remote videos and save the recorded videos on client PC.
User can search and view the recorded files in Playback System. (Click " Playback " in the above figure for replay.)
Snapshot: Click to snapshot remote video. User can view the snapshot images in " Snapshot Manager ".
Playback: User can replay recorded videos. For details please refer to "Playback System ".
Advanced: Go to "Advanced Settings " for details.
Settings: Details will be introduced in "JDCS Settings ".
2. 2 PTZ Remote Control Panel
In this panel, you can remotely control your PTZ camera(s).
2.3 Remote Playback/Remote Download Panel
In JDCS, users can search and play from recorded files stored on local system.
1). Get access to local video channel and select this channel as the current channel.
2). Click "Search" in the below figure, recorded files of this channel on local PC will be listed.
3). Double click the listed files for playback.
4). Right-click and click "Download" to download recorded files stored on local PC onto client PC.
2.4 Master Recording Control
If user is set as Master Recorder in local users ("Users" >> "Client User Rights" >> " Master Recording Control "), users
can also control the recording on a local PC.
Right-click in JDCS view channel, users can "Start Master Recording" or "Stop Master Recording ".

JVS-D7216 Standalone DVR User Manual
13
2.5 Operation Log
Operation records will be displayed in this panel.
3. JDCS Settings
NOTE : The UI code stated in this manual is your CloudSEE Id number.
3.1 Video Source/Group