JOYTECH JS109HR2 User manual

Vision Electronics Co., Ltd
2.4GHzPS2 RFCONTROLLER
INSTRUCTION MANUAL
1. SUMMARY
Using 2.4GHz Multi ChannelRF module. Compatible with SONYPLAYSTATION 2. Using
AC keyto change channels. Supporting 16 players simultaneously. Having auto-sleep
function to save batterylife.
2. OPERATION INSTRUCTION
2.1 Basicoperation instruction
2.1.1Connecting
a).Insert receiver into PS2 console, receiver redLEDbright, put AAA(LR03)
3PCS batteries into the batterycompartment of controller. Soreceiver has been
connected with controller.
PS2
RX
TX
b). When several players(less than 16 players) connect the console
simultaneously,receiver will auto checkthecontrollers,andgenerate
one-to-onechannels. If channels repeat orbe interfered, please refer to
DISCONNECTandRESETTING.Player cancheck the greenLED inthe
controller to know the connectionsituation. If green LED is bright, it means
controller workswell with receiver.If green LED is twinkle, it means the
controller didn t workwell with receiver.If green LED is dark, it means the
controller didn t workwith receiver.

Vision Electronics Co., Ltd
PS2
RX
RX
RX
TX
TX
TX
TX
RX
2.1.2DISCONNECT& RESETTING
a). When batteryisinadequate, or informationsendingis interfered byblock, the
channel will be changeful, or controller information will off andon.In this
moment, the greenLED inthecontroller will be dark.
.........
In this situation, please check the batteryandmake surethat shockhas been
takenoff.
.........
Thenplease pressAC keyof wished controller, soreceiver and wished controller
hasconfirmed new channel. In the meanwhile,Connect LED inthe receiver and
controller will light, so youcan playnormally.
TX
Connect
PS2
RX
b). If original channelsof several receivers repeat andinterfere witheach other,
channel ischangeful as well. So it is for controllers.

Vision Electronics Co., Ltd
PS2
RX
RX
RX
TX
TX
TX
TX
RX
In this situation, please turn off all the controllers power, Then turnon one of
controller power and pressAC key.So new channel will confirmand Connect
LEDin the receiver and controller will light.
PS2
RX
RX
RX
RX
TX
TX
TX
1
2
3
4
2
3
4
Connect
TX
1
Turnonthe next controller power andpress AC key, so this channel will confirm
andCONNECTLED light. In this wayyou canreset the rest channels in turn.
PS2
RX
RX
RX
RX
TX
TX
TX
1
2
3
4
1
3
4
Connec
TX
2
c). In the situation that receiver sID is different fromcontroller s
Controllers original setting have one for one ID. When receiver s original ID is
different fromcontroller s,you dbetter reset ID.

Vision Electronics Co., Ltd
PS2
RX
TX
TX
1
2
1
Press AC keyof receiver,thenpress the AC keyofyour wished controller.After
that,ID resetting has completed. At the same time, channel will confirmand
CONNECTLED lights. So you can playnormally.
Step 1: Press the AC keyofreceiver
PS2
RX
TX
TX
2
1
Connect
?
Step2: Pressthe AC keyof controller.
PS2
RX
TX
TX
2
1
Connect
2
2.1.3Sleep Mode
If you donot touch anykeyof controller within3 minutes,the controller will
auto-sleep.
2.1.4Wake Mode
Under the SleepMode,press anykey( including D-PAD/3D/actionkeys) will
wake upthe controller.

IMPORTANT HEALTH WARNINGS
TAKING THE FOLLOWING PRECAUTIONS MAY REDUCE THE RISK OF PHOTOSENSITIVE
EPILEPTIC SEIZURES:
• Sit further away from the screen
• Use a smaller TV screen
• Play in a well-lit room
• Do not play when you are drowsy or fatigued
If you or any of your relatives have a history of seizures or epilepsy, consult a doctor before playing.
WE ALSO ADVISE YOU TO TAKE REGULAR BREAKS OF 15 MINUTES EVERY HOUR.
Design and specifications are subject to change without notice.
Dispose of this product or products contained in this pack in accordance with local and national
disposal regulations.
PlayStation®, PSone™ and PlayStation®2 are either trademarks or registered trademarks of Sony Computer
Entertainment Inc.
FCC Statement
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) This device must accept any interference received,
including interference that may cause undesired operation.
CAUTION
To maintain compliance with the FCC’s RF exposure guidelines place the receiver module unit at least 20cm
from nearby persons.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a ClassB digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation.This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•Consult the dealer or an experienced radio / TV technician for help.
PHOTOSENSITIVE SEIZURE WARNING
A very small percentage of people may experience a seizure when
exposed to certain visual images, including flashing lights or patterns
that may appear in video games. Even people who have no history of
seizures or epilepsy may have an undiagnosed condition that can cause
these “photosensitive epileptic seizures” while watching video games.
These seizures may have a variety of symptoms, including
lightheadedness, altered vision, eye or face twitching, jerking or
shaking of arms or legs, disorientation, confusion, or momentary loss
of awareness. Seizures may also cause loss of consciousness or
convulsions that can lead to injury from falling down or striking
nearby objects.
Immediately stop playing and consult a doctor if you experience
any of these symptoms.
Parents should watch for or ask their children about the above
symptoms - children and teenagers are more likely than adults to
experience these seizures.
HELPLINE
If you are experiencing a problem with this product contact the
Joytech Product Helpline on
+44 (O) 8OO 38 99 647
(FREEPHONE UK ONLY)
or visit our website at www.joytech.net to obtain localised
helpline numbers.
P. 4
Table of contents
Other JOYTECH Controllers manuals
Popular Controllers manuals by other brands

Sunrise Medical
Sunrise Medical Magic Mobility R-net OMNI2 user guide

Eurotherm
Eurotherm 7000 Series user manual

Tekram Technology
Tekram Technology HOYA IrWave 520UK USB-IrDA installation guide

sparkfun
sparkfun Qwiic Flex Glove Controller SEN-14666 HOOK-UP GUIDE

Bernini
Bernini Be242 AMF ATS installation manual

Asparion
Asparion D700 manual