JRC JCY-1700 User manual

JCY-1700/SJCY-1700/S
CYCCYC-311A Playback Software311A Playback Software
Instruction ManualInstruction Manual
Version 2.0Version 2.0
VDVDR/S-VDRVDR

Introduction
Playback Software / Instruction Manual
i
＜Introduction＞
This software is intended to help analyze the data recordings that are stored in a capsule or PC card of
VDR/S-VDR installed onboard.
This software chronologically plays back all the data including the radar image, bridge and VHF
communication audios recorded in VDR/S-VDR.
-Before using the software, read this manual thoroughly to ensure correct use.
-Keep the manual in a convenient location so that it can be used easily whenever necessary.
-Use this manual to check the operation of the software or at the occurrence of a fault.
Microsoft, MS-DOS, and Windows are the registered trademarks of Microsoft Corporation in the U.S.A and /
or other countries.
Pentium is the trademark of Intel Corporation.
The names of actual companies and products mentioned herein are the trademarks of their respective
owners.
Attention
(1) The copyright of this software and a manual is in Japan Radio Co., Ltd.
(2) The range as which the Copyright Act determines a part or all of the contents of this software
and a manual cannot be exceeded, and it cannot reproduce without notice.
(3) Although we created to make doubly sure about the contents of this book, if there is a thing of
companion mind, such as a doubtful point, and an error, omission in written, please contact me.
(4) Please understand beforehand that it is not concerned with (3) clauses and any responsibility
cannot be taken about the claim of the loss for reasons of the employed result, loss profits, etc. in
our company.
Note The install CD-ROM of the Playback software is kept on the back side
of the VDR/S-VDR equipment door.
After installing the software, please return the CD to the place.

Before Using
Playback Software / Instruction Manual
ii
＜Before Using＞
Icons
This manual and product employ various icons to enable users to use the product safety and
correctly, and to prevent any harm to users or others, and to prevent damage to the property.
The icons and the meanings are indicated below.
Example of icons
The △symbole indicates a caution (including danger or warning).
Inside of the symbol indicates the actual details (this icon indicates the
caution regarding electric shock).
The symbol indicates prohibition.
The actual contents (this icon indicates “disassembly prhibited”) are provided
inside or alongside of the symbol
The ●symbol indicates an action or insutruction. The actual contenst (this
icon indicates removal of the power plug from socket) are provided inside of
the symbol
Electric
shock
Disassembly
prohibited
Remove
Plug Instruction
WARNING Incorrect use of the equipment by ignoring this icon may cause death or a
seruous injury.
CAUTION Incorrect use of the equipment by ignoring this icon may cause an injury o
r
physical damage.
Prohibited

Notes on Using
Playback Software / Instruction Manual
iii
< Notes on Using >
Do not disassemble or remodel this equipment.
Such action may cause fire, electric shock, or an equipment fault.
Do not use any AC/DC adaptor other than attachment.
Such action may cause fire, electric shock, or an equipment fault.
Do not use any power supply voltage other than the specified voltages.
Such action may cause fire, electric shock, or an equipment fault.
Do not use any battery other than specification.
Such action may cause burst of a battery by liquid leak, fire, or injury.
Do not put containers into which it went, such as water, or a small metal thing on this
equipment top or near.
When water enters or a metal thing falls into the equipment, it becomes the cause of a fire, an
electric shock, and failure.
Do not damage a power cord or process it.
If put a heavy thing, heat, it pulls or it bends by force, a power cord will be damaged and it
may become the cause of fire and electric shock.
When a fault occurs, turn off the power supply of this equipment, remove the plug, and
contact the Sales Department of Japan Radio Company, nearest branch company, branch
office, sales office, or our agent.
Continuous use may cause fire or electric shock.
Do not check or repair the inside of the equipment by yourself.
Checking or repair by anyone other than the specialist maintenance staff may cause fire or
electric shock.
Request checking or repair of the inside of the equipment to the sales Department of Japan
Radio Company, nearest branch company, branch office, sales office, or our agent.

Notes on Using
Playback Software / Instruction Manual
iv
CAUTION
Do not install the equipment in the location affected by water, humidity, dust, or soot. It may
become the cause of fire, electric shock, or a fault.
Do not put in from a vent foreign substance, such as metal or a thing which is easy to burn.
It may become the cause of fire, electric shock, or a fault.
Do not put on a place with many vibration and shocks.
It may fall and may become the cause of an injury and failure.
Do not wet this equipment or do not put in water.
It may become the cause of electric shock, or a fault.
Do not plug up the vent of this equipment.
It may be filled with heat and fire and failure may occur.
When the equipment is not used for a long time, pull out a power supply plug from a wall
socket for safety.
It may become the cause of fire or electric shock.
Pull out a plug from a wall socket for safety at the time of care.
It may become the cause of fire or electric shock.
Be careful of a computer virus.
If a computer is infected with a virus, it may suffer the damage of an unusual display, a
program, and data being destroyed, and may become the cause of failure.
Please confirm whether it is infected with the computer virus, using a virus checker program
periodically.

Contents
Playback Software / Instruction Manual
v
＜Contents＞
＜Introduction＞............................................................................................................. i
＜Before Using＞.......................................................................................................... ii
< Notes on Using > ...................................................................................................... iii
Chapter1 Outline........................................................................................................... 1
1.1 Operation flow .....................................................................................................................................1
Chapter2 Installing Playback Software....................................................................... 3
2.1 PC specification...................................................................................................................................3
2.2 How to install .......................................................................................................................................4
2.3 How to uninstall .................................................................................................................................30
Chapter3 Connecting PC to VDR/S-VDR .................................................................. 33
Chapter4 Downloading Recorded Data from VDR/S-VDR....................................... 35
4.1 Downloading Recorded Data from VDR/S-VDR by Download Software........................................35
4.2 Folder Composition........................................................................................................................38
Chapter5 Setup for Playback Software..................................................................... 39
5.1 Setup Procedure............................................................................................................................39
Chapter6 Playback Operation.................................................................................... 43
6.1 How to start up the Playback software ..............................................................................................43
6.2 How to exit the Playback software.....................................................................................................44
6.3 Playback screen ................................................................................................................................45
6.4 Playback Operation Panel.................................................................................................................47
6.5 To start playback, and to stop............................................................................................................48

Contents
Playback Software / Instruction Manual
vi
6.6 To set playback time ..........................................................................................................................48
6.6.1Setting playback time by Slide bar...............................................................................................48
6.6.2 Setting playback time by [Forward] button or [Rewind] button ....................................................49
6.6.3 Setting playback time by [Clock] button ......................................................................................49
6.7 To change a playback speed .............................................................................................................50
6.8 To adjust Volume and select audio source ........................................................................................51
6.9 Voyage screen...................................................................................................................................52
6.9.1 Graphic screen ...........................................................................................................................53
6.9.2 Numeric screen...........................................................................................................................59
6.10 Alarm/Status screen.........................................................................................................................60
6.11 Radar screen ...................................................................................................................................61
6.11.1 Icon ...........................................................................................................................................62
6.11.2 Menu bar...................................................................................................................................62
6.12 AIS Screen....................................................................................................................................63
6.12.1 Graphic screen.......................................................................................................................64
6.12.2 List screen..............................................................................................................................66
6.12.3 Detail Information of own ship ................................................................................................67
6.12.4 Detail information of AIS target...............................................................................................68
6.13 To confirm the record sentences in the NMEA format .....................................................................69
6.14 To print screen .................................................................................................................................71
6.15 To confirm the VDR/S-VDR system information ..............................................................................72
6.16 How to customize screen layout......................................................................................................74
6.17 How to restore to initial screen layout..............................................................................................78
Chapter7 Converting Recorded Data into Industry Standard Formats.................. 79
7.1 Starting Conversion software .........................................................................................................79
7.2 Convert all recorded data...............................................................................................................80
7.3 Convert parts of recorded data ......................................................................................................82
7.4 Converted file (Industry Standard Formats files) ............................................................................84

Contents
Playback Software / Instruction Manual
vii
Chapter8 Copying Recorded Data in PC Card ......................................................... 85
8.1 How to eject PC card from VDR/S-VDR............................................................................................85
8.2 How to play back PC card data in VDR/S-VDR.................................................................................87
8.2.1 Creating a playback folder ..........................................................................................................87
8.2.2 Setting required information for playback with the Setup software .............................................87
8.2.3 Copy a recorded data of PC card................................................................................................91
Chapter9 Trouble Shooting........................................................................................ 95
Chapter10 Appendix ................................................................................................... 97
10.1 How to stop capsule recording ........................................................................................................97
10.1.1 Stop Recording.......................................................................................................................98
10.1.2 Restarting Recording..............................................................................................................98
10.2 Sentence and indication place.........................................................................................................99

Contents
Playback Software / Instruction Manual
viii
Blank Page