JRI YJ-390DA User manual

DOT MULTI PRINTER
INSTRUCTION MANUAL

Multi Printer
2
CONTENTS
1. Specifications
1-１Items supplied
1-２General specifications
1-３Compatibility
1-４External View
1-５Names of Each Part
1-６Installing the Printer Paper
2. Functions
2-１General Function Keys
2-２General Settings
2-３Printer Settings
2-４Detailed Printer Functions
3. Communication interface
3-１RS-232C Serial Pin
3-２RS-485 Serial Pin
3-３Current Loop Pin
3-４External Input Pin

Multi Printer
3
1. Specifications
1-１Items supplied
The following items are supplied:
Printer
Test paper
Adapter
Serial cable
Instruction Manual
1-２General Specifications
ITEM
Specifications
Printing method
8 Pin Serial Impact dot matrix system
Number of dot per line
240 DOT
Printing speed
1.6 LINE/SEC
Columns number
30 Columns (in English)
Font size
English: 8x14, Korean: 16x14
Support language
English/Korean (Options available in the internal
program setting mode)
LCD
8 x 2 LINE (BACK LIGHT Function)
Printer Mode
Statistical calculation mode, Clock mode
Cartridge
EPSON ERC-09
Printing paper
57mm(w) x 60mm(dia) ROLL PAPER
Printing width
48mm
Interface
- SERIAL RS-232C,Current Loop
- RS-485(OPTION)
BAUDRATE = 300/600/1200/2400/4800/9600/19200bps
PARITY = None/ Even/ Odd
DATA WIDTH = 8/7 bit
STOP BIT = 1/2 STOP
2 External Input Port
Power
DC +12V 1.5A (External ACAdapter)
Operating temperature range
-15℃~ 50℃
Storage temperature range
-20℃~ 70℃
Certificates
KC Certification, CE Certification
Dimensions (mm)
174.3(W) x 141.3(D) x 86.9(H)
Specifications are subject to change for improvement without notice.
1-３Compatibility

Multi Printer
4
Company
Model
AND
Balance, Scale
SARTORIUS
CP4201, BP410
CAS
AD Series, BW Series, CI Series, CUW/CUX Series, MW Series
OHAUS
Adventurer Series, Explorer Series
PRECISA
480S,/480SCS Series, 24D Series, XB-4200C
MATTLER
AB204-S, PG5002-S
SHIMADZU
EL Series, BX-K Series, UW, UX Series, BL Series
DESCOM
GT-150,PC-100W
SHINKO
AJ-D/AJH-D
SETRA
EL Series
UNIPULSE
F701-C, F741-M
SEWHA
SI 4010
RADWAG
PS210/C/1, PS6000/X, PC750/Y
ACOM
PC-100
* Some other products (not shown in the table) may comply with AD-720Di.
1-４External View

Multi Printer
5
1-５Names of Each Part
[ Front ]
[ Rare ]
Paper Cover
LCD Display
Screen
Power Switch
Function buttons
Paper Cover Fix Levers
Power Input Serial Interface External Input Port

Multi Printer
6
1-６Installing the Printer Paper
①Do not send data to the print during installing the printer paper.
②Push the both fix levers to slide the printer paper cover in the direction of the arrow.
④Insert the printer paper as shown below (the leading edge of the printer paper should
head downwards).
⑤Push the printer paper lightly into the paper slot, then press “FEED (8) button to mount the
paper automatically.
⑥Close the printer paper cover

Multi Printer
7
2. Functions
2-１General Function Keys
Key
Function
"1" (TIME)
Sets the time
"2" (DATE)
Sets the date
"3" (MODE)
Sets the modes
"4" (CODE)
Inputs or changes codes (this key does not function in NORMAL
MODE)
"5" (S-TOTAL)
Prints subtotals (subtotal number of prints, weights measured, etc.)
"6" (G-TOTAL)
Prints totals (Total number of prints, weight measured, max/min values,
range, standard deviation, etc.)
"7" (DELETE)
Deletes the last data printed
"8" (FEED)
Slides up the printer paper
"9" (TEST)
Prints the current printer setting (when power is ON)
"0" (PRINT)
Print key (only in MANUAL MODE)
"ESC"
(MENU/Cancel)
-Enters the printer setting menu (when power is ON)
-Operates only in Printer Setting mode.
-Clears certain setting(s).
"ENT" (Setting)
-Operates only in Printer Setting mode.
-Saves the current setting(s).
TIME/DATE/CODE/FEED/S-TOTAL/G-TOTALkeyscanbeused whileundergoinginterfaceerrors.
By pressing “5” or “6” without measurements, the printer automatically prints out
“SUBTOTAL /TOTAL NO DATA” .
When the number of measurements reaches 999 and “0” key is pressed, the printer
automatically prints subtotals and totals, and resets the count to 000.
2-２General Settings

Multi Printer
8
2-2-1. Time Setting
-Switch the power on and press “1” to enter the time setting mode.
-The time is to be set in a 24-hour format, and use “0”~”9” keys to do so.
(Example)
Setting the time
e.g. Set the time to 1:30PM
1) Press “1” to enter the time setting mode (the cursor blinks) time setting mode.
2) Press “1”, “3” (hour), “3”, “0” (minute) “0”, “0” (second) in order.
3) Press “ENT”to save the set-up time or “ESC” to cancel.
2-2-2. Date Setting
-Switch the power on and press “2” to enter the date setting mode.
-The first two digits represent the year (i.e. 00 as in 2000, 99 as 2099, etc.) and use “0” ~
“9” kyes to set the year, month and day as shown below.
(Example)
Setting the date
e.g. Set the date to June 15th 2014
1) Press “2” to enter the date setting mode (the cursor blinks).
2) Press “1”, “4” (year) “0”, “6” (month) “1”, “5” (day) in order.
3) Press “ENT”to save the set-up date or press ESC to cancel
TIME SET
10:48:57
Hour Minute Second
DATE SET
14-06-15
Year Month Day
SAVE? E
13:30:00
SAVE? E
14-06-15

Multi Printer
9
2-2-3. Mode Setting
-In the turning on print, press “3”key for 1~2 seconds to move “PRINT MODE”setting.
-In the print mode setting, use “▲”and “▼”buttons to change print mode.
(Display)
-Press “ENT”or “ESC”to save or cancel the setting screen.
"ENT" = Setting save, "ESC" = Setting cancel
2-2-4. Code Setting
-Make sure the power is on, then press “4” and hold for 1 to 2 seconds to enter “CODE
SETTING”.
-Use a combination of alphabets and numbers up to 8 digits to create a code.
(Example)
Setting the code
e.g. Set the code to 123456A5
1) Press “4” and hold for 1 to 2 seconds to enter the code setting mode (the
cursor blinks).
2) Numbers and alphabets are only inserted backwards. Press “5”, then press
“ENT” to set the last digit (i.e. 5). The cursor automatically moves to the next
code to insert.
3) Alphabets are inserted by pressing the number kyes twice. Press” 2” twice to
put “A” as shown in the example.
4) Press the :ENT”key after conversion “A”to the store ”A”has been moving cursors
Automatically.
5) In the same way, insert the remaining 6 digits from backwards (i.e. 6, 5, 4,
3…etc.) to complete the code. When the code is completely inserted, the
printer automatically saves the code setting and operates on Stand-By mode.I
6) During setting the code, press “ESC” to cancel and exit without changing the
previous code setting.
CODE SET
00000001
PRN MODE
EXT.KEY*

Multi Printer
10
2-2-5. Various Keys to Print
[Press PRINT or “0” to print measured data.] [ Press G-TOTAL to print totals ]
[ 소계 키시소계 데이터 인쇄 ]
[ Press “S-TOTAL” to print subtotals ]
Code : 00000001
2014-04-08 17:23:30
NO 001 40.40 g
2005-02-16 17:23:40
NO 002 90.78 g
==========================
*****< subtotal >*****
2014-04-08 17:24:50
Code 00000001
NO 002
TOTAL 131.78 g
==========================
= = = = = = = = = = = = = = = = =
*****< TOTAL >*****
2011-04-08 17:25:50
CODE 00000001
NO 002
TOTAL 131.78 g
Average 65.39 g
MAX 90.78 g
MIN 40.40 g
RANGE 50.78 g
DEV. 25,389 g
C.V 0.388 %
= = = = = = = = = = = = = = = = =

Multi Printer
11
2-2-6. Special Functions
To access these functions, press and hold one of the following buttons as shown in the table
when the power is off. Then, turn the power back on while pressing and holding the selected
button.
These functions allow users to access Printer Setting mode, print Printer Set-up Status and print
or select Hex Dump. After completing each function, make sure the power is switched off. However,
after printing Printer Set-up Status, normal operating is possible.
Key
Function
(Menu/Cancel)
Enters Printer Setting mode
"9" (Test)
Prints Printer Set-up Status (Self-Test)
(Set)
(HEX DUMP)
Prints input data in ASCII codes to diagnose the status of
received data.
[ Prints Set-Up Status (SELF TEST) ] [HEX DUMP Print Mode ]
**< HEX DUMP PRINT START >**
53 54 2C 2B 30 30 30 36 30 2E
32 34 20 20 67 0D 0A 55 53 2C
2B 30 30 30 36 30 2E 32 34 20
*[SELF TEST]*
VERSION : V3.10(2014/06/02)
USER MODE : AND
PRINT MODE : MANUAL MODE
PRINT FORMAT : TIME/WEIGHT
PRINT FORMAT2: + PRINT
DATA FORM : FORM1
SUB FORMAT : DEL
LINE FEED : 1 LINE
LANGUATE : KOREA
USER CODE : 000001
TOTAL MODE : TIME PRINT
CODE PRINT : PRINT
NO PRINT : PRINT
INTERFACE : RS-232C Serial
Current Loop
PROTOCOL : 2400bps,E,7,1
CURRENT TIME/DATE :
2014-06-03 17:04:26

Multi Printer
12
2-３Printer Settings
This function is used to configure the printing as well as data communication methods between
the printer and scales/balances.
To access this function, press and hold “ESC” for 2 to 3 seconds when the power is on.
.
(Example)
During the settings, “1=SERIAL”, “2=VENDER”and “3=MODE”blink in turn on the screen at an
interval of 1 second. Press the desired setting value (either “1”, “2” or “3”)
-“1”key: Configures serial communication protocols.
-“2”key: Selects manufacturers of electronic balances/scales or indicators in use.
-“3”key: Printer Mode.
Printer Setting Procedure
The following applies to all Printer Settings.
①When a desired item (either “1”, “2”, or “3”) is selected, the value of the selected item
is displayed on the second line of the screen.
②press “▲”key and “▼”key to change the settings. “*” at the right end of the screen
indicates the initial settings when the power was switched on.
③After the settings, press “ENT”to save or “ESC”to cancel and exit.
④When the setting is completed, the printer automatically continues to the next setting
menu.
⑤When the printer setting is completed, turn off the power first and back on again for
use.
ITEM SEL
1=SERIAL

Multi Printer
13
1 KEY
3 KEY
2 KEY
Printer Settings Flow Chart
Make sure the power is on.
Press and hold “ESC” button for 2 to 3 seconds
to enter Printer Setting mode.
ITME SEL
1 = SERIAL
ITME SEL
2=VENDER
ITME SEL
3=MODE
BAUDRATE
2400
300
600
1200
2400
4800
9600
19200
PARITY
NONE
NONE
EVEN
ODD
8BIT
7BIT
STOP BIT
1STOP
1STOP
2STOP
ALL VEN
AND
CAS AD
CAS CI
CAS CUX
CAS MW
CAS EC
PRECIS
OHAUS
STRATOR
ACOM
SHIMADZU
METTLER
DESOM
FINE
UNIPULSE
AND MX50
SEWHA
RADWAG
G-TECH
EXT. KEY
MANUAL1
MANUAL2
AUTO
TIMER
NORMAL
WEIGHT
TIME/WG
TM1/WG
+ PRN
+/-PRN
FORM 1
FORM 2
FORM 3
G/T/N
T/N/G
DEL
SAVE
1 LINE
|
8 LINE
KOREA
ENGLISH
Then continue
[Item Selection/Cancel and Changing Item Value]
"ENT" = Saves the inserted/selected value and
continues to the next settings.
"ESC" = Continues to the next settings without
chancing item values.
“9” or “6” = Changes value of item
WORD LEN
8BIT
PRN FOR.
WEIGHT
KEY
PRN FOR2
+/-PRN
DATA FOR
FORM 1
DATA MET
G/T/N
SUB FOR.
DEL
FEED LINE
1 LINE
LANGUAGE
KOREA
PRN MODE
EXT. KEY

Multi Printer
14
UNIT
g
g
kg
TOTAL MD
T/D YES
T/D YES
T/D NO
COLMNS
20 COL
20 COL
24 COL
30 COL
40 COL
CODE PRN
PRINT
PRINT
NOT PRN
CODE DIR
L <-- R
L <-- R
L --> R
NO PRIN
PRINT
PRINT
NOT PRN
EXT IN1
NONE
NONE
PRINT
FEED
G TOTAL
S TOTAL
EXT IN2
NONE
NONE
PRINT
FEED
G TOTAL
S TOTAL
※Unit selection is applicable when
some specified scales and balances
are used
※When “CODE PRN” = “NOT PRN”,
“CODE DIR” cannot be selected
in the next settings
※“COLMNS” is only available in
NORMAL MODE

Multi Printer
15
2-４Detailed Printer Functions
2-4-1. Serial Communication
Item
Description
BAUDRATE
-Configures Baud rate
-The second line on the screen displays optional “BAUDRATE”
values, and “*” at the right end of the screen is the current
printer setting value of Baud rate.
-Optional values : 300/600/1200/2400/4800/9600/19200
PARITY
-Configures Parity.
-The second line on the screen displays optinal “PARITY” values,
and “*” at the right end of the screen is the initial current setting
value of PARITY.
-Optional values : NONE/EVEN/ODD
WORD LEN
-Configures Data Word Length
The second line on the screen displays optional “WORD LEN”
values, and “*” at the right end of the screen is the current
printer setting value of WORD LEN.
-Optional values : 8BIT/7BIT
STOP BIT
-Configures Stop Bit
-The second line on the screen displays optional “STOP BIT”
values, and “*” at the right end of the screen is the current
printer setting value of “STOP BIT”.
-Optional values : 1STOP/2STOP
2-4-2. Manufacturer Selection
Item
Description
VENDER
Selects the manufacturer of the scales/balances or indicators,
etc. connected to the printer.
-The second line on the screen displays a set of manufacturers,
and “*” is the current printer setting value of VENDER.
-Ensure the manufacturer of the scales/balances or indicators,
etc. connected to the printer is selected correctly.
If vender values do not match the manufacturers of the
scales/balances or indicators, etc. connected to the printer, or
the printer itself is unable to print, please select “ALL VEND”.
2-4-3. Printer Mode

Multi Printer
16
Item
Value
Description
PRN MODE
(PRINT MODE)
EXT. KEY *
- Prints only when the print key on the electronic scales
and balances is pressed by the user.
MANUAL1
- Prints measured data only when “PRINT” key on the printer is
pressedbytheuser.
-Printsonlywhenthedisplayedweightisstable.
MANUAL2
- Prints measured data only when “PRINT” key on the printer is
pressedbytheuser.
-Printsonlywhenthedisplayedweightiseitherstableorunstable.
AUTO
- Prints automatically when weights are loaded onto the
scales and balances.
TIMER
- Prints at a configured time interval.
- Prints a selected time during the intervals.
NORMAL
Prints data received from the scales and balances.
PRNFOR.
(PRINTFORMAT)
WEIGHT *
Prints the number of measurements, and weight.
TIME/WEIGHT
Prints the date/time, number of measurements and weight.
TIME1/WEIGHT
Prints the date/time at the first measurement, then weight
only afterwards.
PRNFOR2
(PRINTFORMAT2)
+ PRN *
Prints only when the data is “+”
+/-PRN
Prints when the data is either “+” or “-“
DATAFORM
FORM 1 *
Prints measurement data in sequence, according to the
number of measurements.
FORM 2
Receives the measured data as “TARE” ”NET” in
sequence, then prints GROSS, TARE and NET in order .
FORM 3
Prints Gross/TARE/NET by saving the “TARE” value in “7”
key, and recognizing next measured data as “NET”.
SUB FOR.
(SUB FORMAT)
DEL *
Clears the saved data of weight and the number of
measurements after printing subtotals. However, total data
still remains.
SAVE
Saves the data of weight and the number of
measurements after printing subtotals and continues to
accumulate values to the saved data.
FEED CON
(FEED COUNT)
1 ~ 8
Default : 1
Feeds the printer paper for the user to read the printed
contents.
Optional values: 0 ~ 8
LANGUAGE
KOREA *
Prints in Korean
ENGLISH
Prints in English
TOTAL MODE
T/D YES *
Prints the date and time when printing subtotals/totals.
T/D NO
Does not print the date and time when printing
subtotals/totals

Multi Printer
17
CODE PRINT
PRINT *
NOT PRINT
Enables/Disables codeprinting.
CODE
DIRECTION
L <--- R *
L ---> R
Configuresthe codeprogressdirection.
NO PRINTER
PRINT *
NOT PRINT
Enables/Disables printingthe number of measurements.
EXT IN1
NONE *
PRINT
FEED
G TOTAL
S TOTAL
Configures thefunctions whenconnectedtoEXTIN PORT1.
When EXT IN PORT1 and GND are connected, relevant
functionsare operated.
“PRINT” settings are only applicable in MANUAL 1/2.
EXT IN2
NONE *
PRINT
FEED
G TOTAL
S TOTAL
Configures thefunctions whenconnectedtoEXTIN PORT2.
When EXT IN PORT2 and GND are connected, relevant
functionsare operated.
“PRINT” settings are only applicable in MANUAL 1/2.
NORMAL
COLUMN
20 COL. *
24 COL.
30 COL.
40 COL
It is performed only in NORMAL MODE from PRINTER
MODE.
Configures the column value (20/24/30/40).
“*”= Factory Settings.

Multi Printer
18
2-4-4. Details of Printer Mode
AD-720Di provides 5 Printing Modes as follows.
PRINT MODE
Description
EXT. KEY MODE
Prints only when “PRINT” key is pressed on the electronic scales and
balances.
"ERROR" is not displayed on the screen although the printer is
connected to an electronic scale.
Does not print by pressing “PRINT” key in this mode.
e.g.)
Before printing Printing After printing
MANUAL MODE
1 / 2
Prints only when the user presses “PRINT”key on the printer.
Manual mode provides 2 (1 or 2) modes. Manual_1 is available to print
by print key when getting stable data and manual_2 is available to print
when getting stable/unstable data.
May be printed by an external input signal mode.
If electronic scales/balances operate unusually for more than 6
seconds, “DATA ERR” is displayed on the screen and blinks the
message. In this case, “PRINT” key does not work.
e.g.)
Before printing Printing After printing Data error
AUTO MODE
Prints automatically when weight is loaded onto the scales/balances in
use.
In this mode, pressing “PRINT” key is unnecessary.
In this mode, after printing data, the scales and balances must be reset
to zero before measuring.
If electronic scales/balances operate unusually for more than 6
seconds, “DATA ERR” is displayed on the screen and blinks the
message. In this case, “PRINT” key does not work.
E.g.)
Before printing Printing After printing Data error
EXT. KEY
READY
EXT. KEY
PRINT
EXT. KEY
READY
MANUAL 1
PUSH REN
MANUAL 1
PRINT
MANUAL 1
PUSH PRN
MANUAL 1
DATA ERR
AUTO
READY
REN
AUTO
PRINT
AUTO
READY
AUTO
DATA ERR

Multi Printer
19
TIMER MODE
Prints at a configured time interval.
The interval time can be set within a range of 5 second to 1 hour.
If electronic scales/balances operate unusually for more than 6
seconds, “DATA ERR” is displayed on the screen and blinks the
message.
Setting interval time
e.g.) Set the interval time to 30 seconds.
1) Enter TIMER MODE (See pg 13)
2) press buttons in the sequence of “3”,”0”(Second),”0”,”0”(Minute)
3) The screen displays as below:
To save, press "ENT" key.
-If numbers are pressed incorrectly, press “ESC” to clear
the values and return to the initial setting screen.
e.g.)
Setting Screen Waiting Printing Data error
NORMAL MODE
Thismodeisidentical to AND’s GLP MODE(GoodLaboratoryPractice).
In this mode, printing contents include the manufacturer, model name, model
S/N, IDnumber,date, timeandsignaturespaceincompliancewithGLP.
Calibration and calibration test include information of calibration weights and
testresults.
ID numbers can be used for identifying electronic scales/balances during
maintenance..
e.g.)
Before Printing Printing After printing
TIME SET
M:S00:00
NextTime
13:58:30
NextTime
PRINT
REN
NextTime
DATA ERR
TIME SET
M:S00:00
NORMAL
READY
NORMAL
PRINT
NORMAL
READY
TIME SET
SAVE? E

Multi Printer
20
2-4-5. Printer Data Forms
Data can be printed in three different formats as below.
Format
Description
FORM 1
This format allows users to print measured data in sequence.
Printing format e.g.)
[Measured Data Printing ] [Total Printing ]
FORM 2
Receives measured data as “TARE” and ”NET”, then prints GROSS,
TARE, and NET in sequence.
Saves the first measured data as ‘TARE’ value (not printed).
Saves the second measured data as “NET” value and prints GROSS,
TARE and NET in sequence.
Saves the second measured data as “TARE” value (not printed).
Saves the fourth measured data as “NET” value and prints GROSS,
TARE and NET in sequence.
(in sequence? In order?..)
e.g.)
CODE : 00000001
2011-04-08 17:23:30
NO 001 40.40 g
2005-02-16 17:23:40
NO 002 90.78 g
= = = = = = = = = = = = = = = = =
*****< TOTAL >*****
2011-04-08 17:25:50
CODE 00000001
NO 002
TOTAL 131.78 g
Average 65.39 g
MAX 90.78 g
MIN 40.40 g
RANGE 50.78 g
DEV. 25,389 g
C.V 0.388 %
= = = = = = = = = = = = = = = = =