JS Automation FA-G41A User manual

FA-G41A
PICMG 1.0 with Intel®G41
support LGA775 Intel®Core2TM
Quad CPU Card With VGA, DDR3,
Dual PCIe GbE, SATA II, COM, USB 2.0
and Audio
User's Manual (V1.0)
健昇科技股份有限公司
JS AUTOMATION CORP.
新北市汐止區中興路 100 號6樓
6F., No.100, Zhongxing Rd.,
Xizhi Dist., New Taipei City, Taiwan
TEL：[phone]
FAX：[phone]
http://www.automation.com.tw
http://www.automation-js.com/
E-mail：[e-mail]

1
Contents
1. Forward................................................................................................................................................2
2. Features................................................................................................................................................3
3. Specifications.......................................................................................................................................4
4. Dimensions ..........................................................................................................................................5
5. Jumper and Connector Locations ........................................................................................................6
5.1 FA-G41A Layout .........................................................................................................................6
5.2 Peripheral Interface Connectors...................................................................................................7
5.3 External Interface Panel Connectors............................................................................................7
6. Connector and Jumper setting..............................................................................................................8
6.1 Peripheral Interface Connectors...................................................................................................8
6.1.1 ATX Power Control Connector................................................................................................8
6.1.2 Audio Kit Connector................................................................................................................8
6.1.3 Battery Connector....................................................................................................................8
6.1.4 CPU Fan Connector.................................................................................................................9
6.1.5 CPU Power Input Connector ...................................................................................................9
6.1.6 DVI Connector.........................................................................................................................9
6.1.7 Digital I/O Connector ............................................................................................................10
6.1.8 Floppy Disk Connector..........................................................................................................10
6.1.9 Front Panel Connector...........................................................................................................11
6.1.10 Infrared Interface Connector..............................................................................................11
6.1.11 Keyboard Connector..........................................................................................................11
6.1.12 Memory Slot ......................................................................................................................12
6.1.13 IDE Connector...................................................................................................................12
6.1.14 Parallel Port Connector......................................................................................................13
6.1.15 SATADrive Connectors.....................................................................................................13
6.1.16 Serial Port Connector.........................................................................................................14
6.1.17 SPI Flash Connector ..........................................................................................................14
6.1.18 USB Connectors ................................................................................................................14
6.2 External Interface Connector.....................................................................................................15
6.2.1 Keyboard/Mouse Connector..................................................................................................15
6.2.2 LAN Connectors....................................................................................................................15
6.2.3 USB Connector......................................................................................................................16
6.2.4 VGA Connector .....................................................................................................................16
7. Ordering information.........................................................................................................................17

2
1. Forward
Thank you for your selection of FA-G41A cpu card.
Any comment is welcome,
please visit our website: www.automation.com.tw for the up to date information.

3
2. Features
PCIMG 1.0
RoHS compliant
LGA775 CPU socket
Supports two DDR3 DIMMs
Two Gigabit Ethernet connectors
Four SATA connectors
High Definition audio to connect to an optional audio kit

4
3. Specifications
Form Factor : PCIMG 1.0
CPU Supported : Socket LGA775 Intel®Core™2 Duo/Quad/Extreme, Celeron Front Side Bus
(FSB) : 800/1066/1333 MHz
Front Side Bus (FSB) : 800/1066/1333 MHz
Northbridge Chipset : Intel®G41
Integrated Graphics : GA DVI (FA-G41A-DVI only)
Memory : Two DDR3 modules up to 2 GB each (4 GB total)
Southbridge Chipset : Intel®ICH7
BIOS : AMI BIOS
Digital I/O : 8-bit, 4-bit input/4-bit output
Ethernet Controllers : Dual Realtek RTL8111CP
Super I/O Controller : iTE IT8718F
Watchdog Timer : Software programmable supports 1~255 sec. system reset
Audio Connectors : One internal audio connector
Keyboard/Mouse : One external PS/2, one internal pin header
Serial Ports : Two RS-232 COM connectors
USB 2.0/1.1 ports : Six internal via pin header One external
Floppy Disk Drives : One floppy disk drive (FDD) connector
IDE : One IDE connector
Serial ATA : Four independent SATAchannels with 3.0 Gb/s data transfer rates
Environmental and Power Specifications
Power Supply : ATX power supported
Power Consumption : 5 V @ 7.13 A 12 V @ 0.27A 5VBS @ 0.11 A Vcore @ 3.02 A
3D Mark2001SE with Intel®Core™2 Duo E8500 3.16GHz
and two 2GB DDR3 modules
Operating temperature : 0ºC ~ 60ºC( 32°F ~ 140°F), requires cooler and silicone heat sink paste
Humidity : 5% ~ 95% (non-condensing)
Physical Specifications
Dimensions : 338 mm x 122 mm
Weight GW : 1100 g

5
4. Dimensions

6
5. Jumper and Connector Locations
5.1 FA-G41A Layout

7
5.2 Peripheral Interface Connectors
Connector
Type
Label
ATX Power Control Connector
3-pin wafer (1x3)
ATXCTL1
Audio Kit Connector
10-pin header
J_AUDIO1
Battery Connector
2-pin wafer (1x2)
BAT1
CPU Fan Connector
4-pin header
CPU_FAN1
CPU Power Input Connector
4-pin connector
CPU12V1
DVI Connector
26-pin header
DVI1
Digital I/O Connector
10-pin header
DIO1
Floppy Disk Connector
34-pin header
FDD1
Front Panel Connector
14-pin header
F_PANEL1
Infrared Interface Connector
5-pin header (1x5)
IR1
Keyboard Connector
5-pin header (1x5)
KB1
Memory Slot
DIMM slot
DIMM1, DIMM2
IDE Connector
40-pin box header
PIDE1
Parallel Port Connector
26-pin box header
LPT1
SATA Drive Connectors
7-pin SATA drive
connectors
SATA1, SATA2, SATA3,
SATA4
Serial Port Connector
10-pin box header
COM1, COM2
SPI Flash Connector
8-pin header
JSPI1
USB Connectors
8-pin header
USB1
5.3 External Interface Panel Connectors
Connector
Type
Label
Keyboard/Mouse Connector
PS/2
KB_MS1
LAN Connector
RJ-45
LAN1, LAN2
USB Connector
USB port
USB_C1
VGA Connector
15-pin Female
VGA1

8
6. Connector and Jumper setting
6.1 Peripheral Interface Connectors
6.1.1 ATX Power Control Connector
(ATXCTL1 : 3-pin wafer (1x3))
The connector is for enabling an ATX power supply. When connected to the power supply,
the power can be turned on and off with the front panel switch.
Pin
Description
1
GND
2
ATX_ON
3
5VSB
6.1.2 Audio Kit Connector
(J_AUDIO1: 10-pin header)
This connector connects to an external audio kit.
Pin
Description
Pin
Description
1
ACZ_SYNC
2
ACZ_BITCLK
3
ACZ_SDOUT
4
ACZ_PCBEEP
5
ACZ_SDIN
6
ACZ_RST#
7
ACZ_VCC
8
ACZ_GND
9
ACZ_12 V
10
ACZ_ GND
6.1.3 Battery Connector
(BAT1: 2-pin wafer (1x2))
This is connected to the system battery. The battery provides power to the system clock to
retain the time when power is turned off.
Pin
Description
1
Battery+
2
Ground

9
6.1.4 CPU Fan Connector
(CPU_FAN1: 4-pin header)
The fan connector attaches to a CPU cooling fan.
Pin
Description
1
GND
2
+12 V
3
Rotation signal
4
Control
6.1.5 CPU Power Input Connector
(CPU12V1: 4-pin connector)
The CPU power input connector provides power to the CPU.
Pin
Description
1
GND
2
GND
3
+12 V
4
+12 V
6.1.6 DVI Connector
(DVI1: 26-pin header)
The DVI connector connects to a monitor that supports DVI video input.
Pin
Description
Pin
Description
1
Data 2
14
VCC
2
Data 2+
15
GND
3
GND
16
Hot Plug Detect
4
N/C
17
Data0
5
N/C
18
Data 0+
6
DDC Clock
19
GND
7
DDC Data
20
N/C
8
N/C
21
N/C
9
Data 1
22
GND
10
Data 1+
23
Clock+
11
GND
24
Clock
12
N/C
25
GND
13
N/C
26