JS Automation PCIE-Q670 User manual

PCIE-Q670
Full-size PICMG 1.3 CPU card Supports
LGA1155 Intel®Core™
i7/i5/i3/Pentium®/Celeron®CPU with Intel®
Q67, DDR3, VGA/DVI-D, Dual Intel®PCIe
GbE, SATA 6Gb/s, PCIe Mini, HD Audio
and RoHS
USER’S MANUAL (V1.0)
健昇科技股份有限公司
JS AUTOMATION CORP.
新北市汐止區中興路 100 號6樓
6F., No.100, Zhongxing Rd.,
Xizhi Dist., New Taipei City, Taiwan
TEL：[phone]
FAX：[phone]
http://www.automation.com.tw
http://www.automation-js.com/
E-mail：[e-mail]

1
CONTENTS
1. Forward................................................................................................................................................. 2
2. Features................................................................................................................................................. 3
3. Specifications........................................................................................................................................ 4
4. Dimensions(mm) .................................................................................................................................. 6
4.1 PCIE-Q670 Series Dimensions (mm).......................................................................................... 6
4.2 External Interface Panel Dimensions (mm)................................................................................. 6
5. Jumper and Connector.......................................................................................................................... 7
5.1 Jumper and Connector Locations ................................................................................................ 7
5.2 Peripheral Interface Connectors................................................................................................... 8
5.3 External Interface Panel Connectors............................................................................................ 8
6. Connector and Jumper setting............................................................................................................... 9
6.1 Internal Peripheral Connectors .................................................................................................... 9
6.1.1 12V Power Connector (CPU12V1) ............................................................................ 9
6.1.2 Audio Kit Connector (J_AUDIO1) ............................................................................ 9
6.1.3 Battery Connector (BAT1).......................................................................................... 9
6.1.4 DDR3 DIMM Slots (CHA_DIMM1, CHB_DIMM1)................................................ 9
6.1.5 Digital I/O Connector (DIO1)................................................................................... 10
6.1.6 DVI-D Connector (DVI Model Only) (DVI1) ......................................................... 10
6.1.7 Fan Connector (CPU) (CPU_FAN1)........................................................................ 10
6.1.8 Floppy Disk Drive Connector (FDD1)......................................................................11
6.1.9 Front Panel Connector (F_PANEL1).........................................................................11
6.1.10 I2C Connector (I2C_1)............................................................................................. 12
6.1.11 Infrared Interface Connector (IR1 CN) .................................................................... 12
6.1.12 Keyboard/Mouse Connector (KB_MS1).................................................................. 12
6.1.13 Parallel Port Connector (LPT1)................................................................................ 13
6.1.14 PCIe Mini Card Slot(CN3)....................................................................................... 14
6.1.15 SATA 3Gb/s Drive Connectors (SATA3, SATA4, SATA5, SATA6)......................... 15
6.1.16 SATA 6Gb/s Drive Connector(SATA1, SATA2)....................................................... 15
6.1.17 Serial Port Connectors, RS-232(COM1, COM2)..................................................... 15
6.1.18 Serial Port Connector, RS-422/485 (COM4)............................................................ 16
6.1.19 SMBus Connector (SMBUS_1)................................................................................ 16
6.1.20 SPI ROM Connector (JSPI1).................................................................................... 16
6.1.21 TPM Connector (TPM1)........................................................................................... 16
6.1.22 USB Connectors (USB1, USB2, USB3) .................................................................. 17
6.2 External Peripheral Interface Connector Panel.......................................................................... 17
6.2.1 Ethernet Connectors (LAN1 and LAN2).................................................................. 17
6.2.2 USB Connectors (USB_C1 and USB_C2)............................................................... 18
6.2.3 VGA Connector (VGA1).......................................................................................... 18
7. Ordering Information.......................................................................................................................... 19

2
1. Forward
Thank you for your selection of PCIE-Q670 cpu card.
Any comment is welcome,
please visit our website: www.automation.com.tw for the up to date information.

3
2. Features
PICMG 1.3 full-size graphics grade solution
LGA1155 CPU socket
Intel®Q67 chipset
Dual-channel DDR3 DIMMs support up to 16.0 GB
Dual independent display by VGA and DVI-D (DVI model only)
One PCIe Mini expansion slot
Two Intel®PCIe Gigabit Ethernet connectors (LAN2 with Intel®AMT 7.0 support)
Two SATA 6Gb/s connectors with RAID function
Four SATA3Gb/s connectors with RAID function
TPM V1.2 hardware security function supported by the TPM module
High Definition Audio
RoHS compliant

4
3. Specifications
Form Factor : PICMG 1.3
CPU Supported : LGA1155 Intel® Core™i7/i5/i3/Pentium®/Celeron®CPU
PCH : Intel®Q67
Memory : Two 240-pin 1333/1066 MHz dual-channel unbuffered DDR3 SDRAM DIMMs
support (system max. 16.0 GB)
Graphics Engine : Supports DirectX 10.1 and OpenGL 3.0
Full MPEG2, VC1, AVC Decode
Audio : Supports IEI AC-KIT-888HD audio kit
BIOS : UEFI BIOS
Ethernet Controllers : Intel®82583V PCIe Ethernet controller
Intel®82579 PHY with Intel® AMT 7.0 support (LAN2)
Super I/O Controller : Fintek F81866
Watchdog Timer : Software programmable supports 1~255 sec. system reset
Expansion : One PCIe Mini slot (with USB 2.0/1.1 signal)
PCIe signal and PCI signal via golden fingers
Supports PCIe x1* or x4** slots on backplane
* The BIOS version “B202ARxx.bin” is used for “PCIe x1 signal to four PCIe
x1 slots”, such as the IEI PE-5S2-R40 backplane.
** The BIOS version “V0V2ARxx.bin” is used for “PCIe x4 signal to one
PCIe x4 slot”, such as the IEI PE-5S-R40 backplane.
I/O Interface Connectors :
Audio Connector : One internal audio connector (10-pin header)
Digital I/O : 8-bit, 4-bit input/4-bit output
Display Output : One VGA integrated in the Intel®Q67(rear I/O)
One DVI-D integrated in the Intel®Q67 (via 26-pin header to the
DVI-D/USB kit; DVI model only)
Ethernet : Two RJ-45 GbE ports
Fan : One 4-pin wafer connector
FDD : One 34-pin floppy disk drive connector
Front Panel : One 14-pin header (power LED, HDD LED, speaker, power button, reset
button)
I2C : One 4-pin wafer connector
Infrared : One via 5-pin header
Keyboard/Mouse : One 6-pin wafer connector
Parallel Port : One parallel port via internal 26-pin box header
Serial ATA : Four SATA 3Gb/s connectors (support RAID 0, 1, 5, 10)
Two SATA 6Gb/s connectors (support RAID 0, 1, 5, 10)

5
Serial Ports : Two RS-232 via internal box headers
One RS-422/485 via internal 4-pin wafer connector
SMBus : One 4-pin wafer connector
TPM : One via 20-pin header
USB Ports : Two external USB 2.0 ports on rear IO
Six internal USB 2.0 ports by three pin headers
Environmental and Power Specifications :
Power Supply : 5V/12V, AT/ATX power supported
Power Consumption : [email protected], [email protected] , [email protected], [email protected],
[email protected](3.40 GHz Intel®Core™ i7 2600 CPU with two 1333 MHz 2GB DDR3
memory)
Operating Temperature : -10ºC ~ 60ºC
Humidity :5% ~ 95% (non-condensing)
Physical Specifications :
Dimensions : 338 mm x 126 mm
Weight (GW/NW) : 1200 g / 420 g

6
4. Dimensions(mm)
4.1 PCIE-Q670 Series Dimensions (mm)
4.2 External Interface Panel Dimensions (mm)

7
5. Jumper and Connector
5.1 Jumper and Connector Locations

8
5.2 Peripheral Interface Connectors
Connector
Type
Label
+12V ATX power supply connector
4-pin Molex power connector
CPU12V1
Audio kit connector
10-pin header
J_AUDIO1
Battery connector
2-pin wafer
BAT1
DDR3 DIMM sockets
240-pin socket
CHA_DIMM1
CHB_DIMM1
Digital I/O connector
10-pin header
DIO1
DVI-D connector (DVI model only)
26-pin header
DVI1
Fan connector (CPU)
4-pin wafer
CPU_FAN1
Floppy disk drive connector
34-pin box header
FDD1
Front panel connector
14-pin header
F_PANEL1
I2C connector
4-pin wafer
I2C_1
Infrared connector
5-pin header
IR1
Keyboard and mouse connector
6-pin wafer
KB_MS1
Parallel port connector
26-pin box header
LPT1
PCIe Mini slot
PCIe Mini
CN3
SATA 3Gb/s drive connector
7-pin SATA connector
SATA3, SATA4,
SATA5, SATA6
SATA 6Gb/s drive connector
7-pin SATA connector
SATA1, SATA2
Serial port, RS-422/485
4-pin wafer
COM4
Serial port, RS-232
10-pin box header
COM1, COM2
SMBus connector
4-pin wafer
SMBUS_1
SPI ROM connector
8-pin header
JSPI1
TPM connector
20-pin header
TPM1
USB connectors
8-pin header
USB1, USB2, USB3
5.3 External Interface Panel Connectors
Connector
Type
Label
Ethernet connector
RJ-45
LAN1
Ethernet connector
RJ-45
LAN2
USB port
USB
USB_C1
USB port
USB
USB_C2
VGA connector
15-pin female
VGA1

9
6. Connector and Jumper setting
6.1 Internal Peripheral Connectors
6.1.1 12V Power Connector (CPU12V1)
The connector supports the 12V power supply.
Pin Description Pin Description
1 GND 2 GND
3 +12V 4 +12V
6.1.2 Audio Kit Connector (J_AUDIO1)
This connector connects to an external audio kit.
Pin Description Pin Description
1 ACZ_SYNC 2 ACZ_BITCLK
3 ACZ_SDOUT 4 ACZ_PCBEEP
5 ACZ_SDIN 6 ACZ_RST#
7 ACZ_VCC 8 ACZ_GND
9 ACZ_12V 10 ACZ_GND
6.1.3 Battery Connector (BAT1)
This is connected to the system battery. The battery provides power to the system clock to retain
the time when power is turned off.
Pin Description
1 GND
2 Battery+
6.1.4 DDR3 DIMM Slots (CHA_DIMM1, CHB_DIMM1)
The DIMM slots are for DDR3 DIMM memory modules.