Julian Bowen Limited Lincoln UP10119 User manual

IMPORTANT - READ CAREFULLY - RETAIN
FOR FUTURE REFERENCE
Version 160328

WARNING – High Beds and the upper bed of bunk beds are not suitable for children
under six years due to the risk of injury from falls.
WARNING – Bunk beds and high beds can present a serious risk of injury from
strangulation if not used correctly. Never attach or hang items to any part of the bunk bed
that are not designed to be used with the bed, for example, but not limited to ropes,
strings, cords, hooks, belts and bags.
WARNING – Children can become trapped between the bed and the wall, a roof pitch, the
ceiling, adjoining pieces of furniture (e.g. cupboards) and the like. To avoid risk of serious
injury the distance between the top safety barrier and the adjoining structure shall not
exceed 75mm or shall be more than 230mm.
WARNING – Do not use the bunk bed/high bed if any structural part is broken or
missing.
It is recommended that you always follow the manufacturer’s instructions to assemble this
product.
Always follow the manufacturer’s recommended mattress size, as per these instructions
and the bunk bed / high bed maximum mattress height marking on the item:
“76cm W 190cm L with a Maximum Depth of 18.5cm.”
It is necessary to frequently ventilate the room in order to keep the humidity low and to
prevent mold in and around the bed.
Please periodically check all the fixings of the item and re-tighten when necessary.
This item conforms to European Safety Standards – BS EN 747-1: 2012 + A1:2015.
Maximum height
of mattress
Distributed by : Julian Bowen Limited
Bennck House,
Park Lane Business Park,
Kirkby-in-Ashfield,
Nos, NG17 9LE
WARNING: This upper bed is not suitable for children under six years
CERTIFICATION LABEL
This bunk bed model has been tested
by an independent laboratory and is in
compliance with BS EN 747-1:2012 +
A1:2015 - Standard Consumer Safety
Specificaon For Bunk Beds & High
Beds
Date of Manufacture: January 2016
Factory ID: Manufactured in Brazil
LINCOLN BUNK BED
Product Code: UP10119
Distributed by : Julian Bowen Limited
Bennck House,
Park Lane Business Park,
Kirkby-in-Ashfield,
Nos, NG17 9LE
WARNING: This upper bed is not suitable for children under six years
CERTIFICATION LABEL
This bunk bed model has been tested
by an independent laboratory and is in
compliance with BS EN 747-1:2012 +
A1:2015 - Standard Consumer Safety
Specificaon For Bunk Beds & High
Beds
Date of Manufacture: January 2016
Factory ID: Manufactured in Brazil
LINCOLN BUNK BED
Product Code: UP10119
04
IMPORTANT INFORMATION

This bunk bed is not designed to be split for use as 2 single beds.
05
148.0cm
87.0cm
201.4cm

06

07

08
.
.
Attach the centre slat rst by pushing the side
rails together so that the slat is ush against the
side rail, before inserting the screws.
Next attach the remaining slats.
Place the slats onto the side rail supports and
distribute evenly by using the spacer provided.

09
Attach the centre slat rst by pushing the side
rails together so that the slat is ush against the
side rail, before inserting the screws.
Next attach the remaining slats.
Place the slats onto the side rail supports and
distribute evenly by using the spacer provided.

10