Julian Bowen Limited ZOD001 User manual

154,0cm
98,5cm
Version Number -1.0
Before you start...
Please carefully unpack and lay out all of the component parts to ensure nothing
is missing and to check each component for any obvious damage.
Should you identify any concerns at this stage please contact the retailer from
whom this product was purchased. Please quote your order number, details of
your issue, the product code, and the batch number from the cartons which will
help to resolve your issue as quickly as possible.
Approximate Assembly Time People Required to Assemble Tools Required
1hr
90CM BUNK BED
Product Code - ZOD001/ZOD002
ASSEMBLY
INSTRUCTIONS
201.0cm
01

02

03
We strongly advise that you do not use Power Tools, such
as drills or electric screwdrivers during the assembly as this
may cause irreparable damage and will invalidate your
warranty.
Please check all hardware matches the list below.Should
you notice any are missing please contact your retailer.
Do Not Use Power Tools
Ø8x30mm
M6x90mm
AX38 BX40
FX4
M8x20mm
KX2
Ø6x70mm
IX8
EX12 M6x50mm
CX40
JCBC Barrel Nut
M6 xØ10.5x16mm
JCBC
Wood Dowel
4mm
Allen Key
JCBB
M6x60mm
DX3
JCBC
LX48
Ø4x30mm
JX4
Ø10x80mm
Ø8mm
Csk
M6x25mm
HX16
JCBC
M6x30mm
GX11
JCBC
MX6 NX2
Nut
Cap
OX4
63x30x20mm 40x40mm
Pad
Spacer
Connecting Bolt

04
PARTS
Please ensure you carefully check all the pieces,should you
have any concerns please contact the retailer before assembly
commences. Please have your order number,detail of the
issue, the product code, and the batch number from the cartons
as this will help us to resolve your issue much faster.
14
15
16
16
16
01
01
02
02
03
03
04
04
05
06
07
06
08
08
10
10
12
12
12
12
13

05
Please take the time to carefully read through these instructions
before you commence.
Keep these instructions for future referance.
We advise that the product is assembled in the room it is intended for.
We advise that you keep the hardware in a bowl during assembly to
avoid losing anything.
We strongly recommend that you keep children away from the work
area.
Small component parts could choke a child if swallowed.
We recommend you use a sheet or blanket to protect both floor and
product through the assembly stages.
This product is heavy, and we recommend a 2 person lift to avoid
personal injury or damage to the product.
Never push or pull the product as this could cause both personal injury
or irreparable damage to product or floor.
We have tried to make this piece of furniture easy to assemble if the
instructions are followed carefully.
In the unlikely event that you have problems with assembling the
product or have missing or damaged parts,please contact your
retailer and we will assist them in rectifying the problem as quickly as
possible.
Please remember we strongly urge you DO NOT use power tools such
as drill or electric screwdrivers as this could cause irreparable damage
to your product and will invalidate your warranty.
ASSEMBLY ADVICE
Do Not Use Power Tools

190mm
06

This bunk bed model has been tested
by an independent laboratory and is
in compliance with
BS EN 747-1&2:2012 +A1:2015 -
Standard Consumer Safety Specification
For Bunk Beds & High Beds
WARNING: THIS UPPER BED IS NOT SUITABLE FOR CHILDREN UNDER SIX YEARS
CERTIFICATION LABEL
Factory ID: Manufactured in China
Date of Manufacture:
ZODIAC BUNK BED
Product Code - ZOD001/ZOD002
Julian Bowen Limited Bentinck
House,
Park Lane Busienss Park ,
Kirkby-in-Ashfield, Nottinghamshire,
NG17 9LE
DO NOT REMOVE THE EN747 P LATE.
IMPORTANT SAFETY WARNING!
DO NOT PLACE THE MATTRESS ABOVE
THE LINE MARKED ABOVE AND DO NOT
REMOVE THIS LABEL
07

Do Not Use Power Tools
A
8
M6x90mm
JCBC
B
8
M6x16mm
Barrel Nut
C
40
Ø8x30mm
Wood Dowel
4mm
Allen Key
K
1
O
4
40x40mm
Pad
01
02
A
K
B
8X
C
40X
O
O
08
12
4X
08
2X
05
07
06
C
10
2X
2X
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
03
A
A
B
B
2X
12
04
A
A
B
B

Do Not Use Power Tools
Do Not Use Power Tools
A
8
M6x90mm
JCBC
B
8
M6x16mm
Barrel Nut
H
8
M6x25mm
JCBC
4mm
Allen Key
K
1
4mm
Allen Key
K
1
03
04
B
B
A
AK
8X
H
8X
K
09
05
06
A
A
A
A
A
A
B
B
B
B
B
B
B
B
A
A
H
H
H
H
H
H
H
H

Do Not Use Power Tools
Do Not Use Power Tools
M6x30mm
JCBC
G
4
4mm
Allen Key
K
1
L
24
Ø4x30mm
Csk
N
2
63x30x20mm
J
4
Ø10x80mm
Connecting Bolt
05
06
L
N
24X
Place the slats onto the side rail supports and
distribute evenly by using the spacer provided.
G
J
4X
Spacer
10
L
L
L
L
L
L
L
L
L
L
L
L
L
LLLLL
LLLLL
L
J
J
J
J
G
G
G
G