Juna JRDAB-01 Installation guide

www.juna.pl
ul. Zgorzelicka 34 , 97-200 Tomaszow Mazowiecki POLAND
JuNa PPHU Manufacturer
DAB+/DAB Radio for CAR
JRDAB-01 Model:
JRDAB-01_M_V4.0_MOST
To start listening of digital radio stations from DAB/DAB+ radio receiver, press
the RADIO button on MMI control panel, then press the button which
controls WAVE BAND function. Fig.1
Select DAB from list of available wave bans. Fig.2
1
2
1
2
Warning! JRDAB -01 device is controlled from MMI control panel buttons.
2.Start Up
1.Introduction
JRDAB-01 device is a DAB/DAB+ radio receiver. It is designed
to receive digital radio stations in vehicle equipped with digital
sound system. JRDAB-01 supports the "following service"
function.
QUICK MANUAL
AUDI MMI 3G
Fig. 2
Fig. 1
FAQ

3.Selecting and changing
www.juna.pl
ul. Zgorzelicka 34 , 97-200 Tomaszow Mazowiecki POLAND
JuNa PPHU Manufacturer
Name DAB radio
stations
Name multiplex
Warning! At first start up of device run a SCAN function to search new stations
and add them to list.
Dab radio stations are broadcasted in blocs called multiplex, each multiplex
include up to 32 stations. Station list is displayed in form of Multiplex name
which includes name of stations. Fig.3
For easier explore of station list we can roll or unroll given multiplex.
For this purpose use roll button from MMI control panel.
Fig. 3

www.juna.pl
ul. Zgorzelicka 34 , 97-200 Tomaszow Mazowiecki POLAND
JuNa PPHU Manufacturer
To start SCAN function, press FUNCTION button , then select and
press button which is shown on display, using knob from MMI control
panel . Fig.5, Fig.6
4.Searching process
1
1
2
2
Warning! When received station has poor quality Signal, sound can
disappear for short moments or completely.
rys.7
Process of searching and adding new stations can take about 40 sec. After
finish of SCAN procedure number of added multiplex will be shown on
display , then device will start playing last listening station or first station
from list (if last listened station is not available).
Name radio station
Name multiplex
3
3
M=0 means that is not found any multiplex.
Fig.5Fig.6
Fig.7