Jung 1723 NE User manual

Satellite insert 3-wire
LB Management
Satellite insert 3-wire
Art. No. : 1723 NE
Operating instructions
1 Safety instructions
Electrical devices may only be mounted and connected by electrically skilled
persons.
Serious injuries, fire or property damage possible. Please read and follow manual fully.
Danger of electric shock. Always disconnect before carrying out work on the devise or
load. In so doing, take all the circuit breakers into account, which support dangerous
voltages to the device and or load.
These instructions are an integral part of the product, and must remain with the end
customer.
2 Function
Intended use
- Extension unit operation of suitable inserts
- Extension for extending the detection field of motion and presence detectors
- Central control of multiple main devices
- Operation with suitable cover from LB management
- Mounting in appliance box according to DIN 49073
3 Operation
The function of the extension depends on the cover of the extension as well as on the insert and
cover of the main device.
Different applications are possible due to various combination options of covers and inserts of
the LB management system. As a result, these instructions only describe the essential basic
functions of the extension unit operation via a push-button. Operations with different covers is
described in the instructions for the cover in question.
Example 1: A push-button is fitted on a switching or dimming insert on the main device
Switch light
oPress push-button at the top.
Light is switched on.
oPress push-button at the bottom.
Light is switched off.
Adjust the brightness (only dimming insert)
oLong press the push-button at the top or bottom.
Save switch-on brightness (only dimming insert)
oAdjust the brightness.
oPress the button cover over entire surface for longer than 4 seconds.
Example 2: A motion or presence detector is fitted on a switch insert on the main device
Switch light
oPress push-button at the top.
Light is switched on.
oPress push-button at the bottom.
Presence detector: Light is switched off.
1/4
82599413
J0082599413 12.03.2018

Motion detector: Run-on time will be restarted.
4 Information for electrically skilled persons
Connecting and mounting the devices
Figure 1: Connection diagram 3-wire extensions on a main device
iUp to five 3-wire extensions (2) can be connected to a main device (1) (figure 1).
2/4
82599413
J0082599413 12.03.2018
LB Management
Satellite insert 3-wire

Figure 2: Connection diagram for multiple main devices to a 3-wire extension for the central
control
iUp to five identical or different main devices (1) can be controlled together by a 3-wire
extension (2) (figure 2).
Figure 3: Clampable cable cross-sections
oConnect extension (2) according to connection diagram (figure 1) and (figure 2). Note
clampable cable cross-sections (figure 3).
3/4
82599413
J0082599413 12.03.2018
LB Management
Satellite insert 3-wire

oInstall insert in appliance box, device connection terminals must be at the bottom.
iDo not attach or replace the cover under voltage, otherwise this might cause a malfunction.
oAttach the frame and the cover.
oSwitch on mains voltage.
5 Technical data
Rated voltage AC 230V~
Mains frequency 50 / 60Hz
Standby load: 0.1…0.5 W, depending on the cover
Ambient temperature -20 ... +45 °C
Storage/transport temperature -20 ... +70 °C
Total length of extension unit cable max. 100m
6 Troubleshooting
Operation via extension does not function properly
Cause: power and extension unit cables are routed in a shared cable. Interferences of the
power cable in the extension unit cable can lead to errors in the telegram transmission.
Route power and extension unit cables in separate cables.
Decrease current load on the power cable.
7 Warranty
The warranty follows about the specialty store in between the legal framework as provided for
by law.
ALBRECHT JUNG GMBH & CO. KG
Volmestraße 1
58579 Schalksmühle
GERMANY
Telefon: [phone]
Telefax: [phone]
[email protected]
www.jung.de
4/4
82599413
J0082599413 12.03.2018
LB Management
Satellite insert 3-wire