Jung FRWM-AR User manual

FRWM-AR
Alarmrelais mit potentialfreiem Eingang
Alarm relay with fl oating input
Betriebsanleitung
Operating manual
ALBRECHT JUNG GMBH & CO. KG
Volmestraße 1
58579 Schalksmühle
www.jung.de

EN
Betriebsanleitung: FRWM-AR Alarmrelais
20 DE
Content
1 Notes on the operating manual 21
2 Safety instructions 24
3 Overview 27
4 Putting into operation 29
5 Connectivity 32
6 Connection test 32
7 Restore default status 33
8 Alert tones and alarm signals 34
9 Faults/error messages 35
10 Packaging, transport and storage 36
11 Air humidity, Ambient temperature 36
12 Maintenance 37
13 Waste disposal 37
14 Accessories, spare parts & service 38
15 TechnicalSpecications 38
EN
DE
Inhaltsverzeichnis
1 Hinweise zur Betriebsanleitung 03
2 Sicherheitshinweise 06
3 Übersicht 09
4 Inbetriebnahme 11
5 Konnektivität 14
6 Verbindungstest 14
7 Auslieferungszustand
wiederherstellen 15
8 Hinweistöne und Alarmsignale 16
9 Störungen/Fehlermeldungen 17
10 Verpackung, Transport und Lagerung18
11 Luftfeuchtigkeit,
Umgebungstemperatur 18
12 Wartung 19
13 Entsorgung 19
14 Zubehör, Ersatzteile & Service 20
15 Technische Daten 20
Die Originalfassung dieser Anleitung ist nach
DIN EN 82079-1 in deutscher Sprache erstellt.
The original version of this instruction has
been prepared in German in accordance with
DIN EN 82079-1.

Operating manual: FRWM-AR Alarm relay 21
EN
EN
1 Notes on the
operating manual
We are glad that you have chosen our product
and we would like to thank you for your trust!
This operating manual contains information
and instructions for commissioning the FRWM-
AR alarm relay, its operation, maintenan-
ce and decommissioning in a safe manner.
The operating manual is intended to increase
the reliability and service life, and to help avoid
hazards and downtime, or a loss of warranty
claims.
It is absolutely necessary that the operating
manual is read and understood.
For better readability, the FRWM-AR alarm
relay is hereinafter referred to as "FRWM-AR"
or "device".
1.1 Scope of the operating manual
This operating manual only applies for the pro-
duct designation FRWM-AR alarm relay.
1.2 Conformity
ALBRECHT JUNG GMBH & CO. KG here-
by declares that the radio system type Art.
No. FRWM-AR corresponds to the directive
2014/53/EU.Youcanndthefullarticlenum-
ber on the device. The complete text of the EU
Declaration of Conformity is available under
the Internet address: www.jung.de/ce

Operating manual: FRWM-AR Alarm relay
22
EN
1.3 Safekeeping of the operating
manual
The operating manual is an important compo-
nent of the device and should always be kept
to hand at the location where it is used and
handed over to the user.
1.4 Symbols used
Various text styles, markings and symbols are
used in the operating manual.
These are explained below:
Warning symbol in warning labels
Additional information and guidelines
(1) Numbered action steps
fSymbol for an instruction or a required
action
5Result of an action
•Symbol for a list
1.5 Copyright
All rights are reserved, particularly the rights of
duplication, distribution and translation.
No part of this operating manual may be repro-
duced in any form, or processed, duplicated,
or disseminated using electronic systems wi-
thout written permission of ALBRECHT JUNG
GMBH & CO. KG.
1.6 Warranty
ALBRECHT JUNG GMBH & CO. KG guaran-
tees the legal warranty for a period of 2 years.
fPlease keep your receipt as a proof
that the device has been purchased
from an authorized retailer, and as a
proof of purchase date.
The receipt is essential and required for any
possible warranty claims!
1.7 Disclaimer
Except for the legal warranty, ALBRECHT
JUNG GMBH & CO. KG assumes no additi-
onal explicit or implicit liability under the ap-
plicable statutory provisions. This shall also
extend to any liability in relation to usability

Operating manual: FRWM-AR Alarm relay 23
EN
EN
and/or suitability for a particular purpose under
any implied liability which nevertheless exists
under the law.
1.8 Limitation of liability
Your rights are limited to the repair or replace-
ment of this device as shipped. ALBRECHT
JUNG GMBH & CO. KG shall accept no
liability for any special, incidental or conse-
quential damages, including, but not limited
to,resultinglossofrevenue,lossofprots,
restrictions of the use of software/hardware,
loss or recovery of data, cost of substitute
equipment, downtime, damage to proper-
ty and claims by third parties as a result of
contractual, statutory or tort recovery claims
arising out of warranty, regardless of any
other warranty, limited or implied by the law,
or in the event that the limited warranty shall
not apply, the liability of ALBRECHT JUNG
GMBH & CO. KG shall be limited to the
purchase price of the device.

Operating manual: FRWM-AR Alarm relay
24
EN
2 Safety instructions
fTreat alarm and alert tones from the
radio smoke alarm device as a priority.
fUse the device only as intended and in
a technically perfect condition.
Battery replacement
If a battery replacement is required, please
send the device to ALBRECHT JUNG GMBH
& CO. KG. Our specia-
lists will then undertake
the battery replacement
for you. This work will be
invoiced. Never open the
device yourself to change
the batteries. This would
void any warranty claims.
2.3 Improper use
The device must not be used for the following
purposes:
•Any use which is not expressly
described as being permitted in this
operating manual
2.1 Presentation and structure of
warning labels
The warning labels are action-oriented; they
are structured and graded as follows:
CAUTION
Type and source of the danger!
Explanation about the type and source.
fMeasures to avert the danger.
CAUTION
Potential minor injuries, material or
environmental damage.
2.2 Proper and intended use
The device may only be used for the following
purposes:
•Addition to a FRWM radio group
to an external interface
(alarm output)
•Expansion of a FRWM radio
group to include an alarm input
When using the FRWM-AR, plea-
se note the following:

Operating manual: FRWM-AR Alarm relay 25
EN
EN
2.4 Relevant documents
Along with the operating manual and quick-
start guide for the FRWM-AR, the operating
manuals for the corresponding radio smoke
alarm devices also apply:
fObserve the operating manual for the
radio smoke alarm device
2.5 Basic safety instructions
The basic safety instructions group all the sa-
fety measures by topic and apply at all times.
General
The devices are subject to strict quality cont-
rols during production. In addition, a function
test is performed before delivery. Nevertheless,
unexpected malfunctions can occur.
External inuences
Externalinuencescancausemalfunctionsand
damage to the device as well as the batteries.
Protect the device from:
• Moisture
• Cold
• Contamination of any kind
Immersion in water
Immersion in water can cause damage to
the device.
fDo not immerse
the device in water.
Sensitive components
The device consists of sensitive
components.

Operating manual: FRWM-AR Alarm relay
26
EN
fDo not throw the device.
fDo not drop the device.
fDo not apply pressure to the device.
fPackage, transport and store the
device in accordance with chapter 10
„Packaging, transport and storage“ on
page 36.
Handling the batteries
CAUTION
Risk of corrosion and burns!
Improper handling of the batteries can
causethemtoleak,explodeoriname.
This can result in chemical burns and other
burn injuries.
fDo not charge the batteries.
fDo not short-circuit the batteries.
fDo not break, crush, dismantle or burn
the batteries.
fDo not expose the batteries to
temperatures above 65 °C.
With intended use of the device and an intact
battery cell, the electrode and electrolyte mate -
rial is not released into the environment.

Operating manual: FRWM-AR Alarm relay 27
EN
EN
•to a ventilation system
•to a sprinkler system
•to a lighting installation
•or to other external devices
3 Overview
3.1 Function
A FRWM-AR which is integrated into a radio
group, has a similar operation to a FRWM. If
an alarm is triggered in a main or subgroup,
the FRWM-AR is also triggered. This trigge-
ring activates the following on the FRWM-AR
intherststep:
•the Status-LED
•the Buzzer
•the relay itself
Dependingonwhichenddeviceorrealarm
controller is connected to the FRWM-AR, these
get also activated via triggering the alarmout-
put of the relay.
If the alarm input is used, a signal is sent to the
respective radio group which results in all the
alarm devices in the radio group sounding the
alarm. If the radio group is preceded by a com-
mon group / shared radio group, their alarm
devices are also triggered. Using the FRWM-
AR alarm relay, you can extend an existing
FRWM radio group by an interface, e.g.:
FRWM Radiolink
Smoke Alarm Push-button
FRWM-AR Alarm Relay

Operating manual: FRWM-AR Alarm relay
28
EN
3.2 Construction
1. Relay: You can connect a voltage of
between 3 and 30 V and an output current of
between 1 and 100 mA to the relay (alarm out-
put with changeover contact (NC/NO)).
1.1 NC (normally closed)
1.2 COM (ground)
1.3 NO (normally opened)
2. Input: A maximum voltage of 24 V can be
connected to the potential-free alarm input.
The switching level is 1,6 V.
3. Status-LED: Displays various events.
4. Buzzer: Acoustic signal in the event of
an alarm
5. Configuration button: Using the sup-
plied split pins, you can configure the
FRWM-AR by gently pressing the button.
12 3 4 5
NC
COMRelay
NO
Input
(potential-fr
ee)
-+
Status-LED
Buzzer
Configuration Butto
n