Jupiter Avionics JA73-001 User manual

JA73-001
Tray Mount Glove Box - 3 Inches High
Installation Manual
Rev. A
Jupiter Avionics Corporation
1959 Kirschner Road
Kelowna BC
Canada V1Y 4N7
Tel: [phone]
Toll-Free: 1 855 478 2232
www.jupiteravionics.com

JA73-001 Tray Mount Glove Box - 3 Inches High
Installation Manual
Rev A Page ii
Copyright 2017 Jupiter Avionics Corp.
All rights reserved
Jupiter Avionics Corporation (JAC) permits a single copy of this manual to be printed or downloaded for the express
use of an installing agency. Any such electronic or printed copy of this manual must contain the complete text of this
copyright notice. Any unauthorized commercial distribution of this manual is strictly prohibited. Except as described
above, no part of this manual may be reproduced, copied, transmitted, disseminated, downloaded, or stored in any
storage medium for any purpose without the express prior written consent of JAC.
RECORD OF REVISIONS
Revision
Rev Date
Description
ECR
A
Jun 2017
Initial release, Serial number 1001 and higher.
4473
Prepared:
MPB
Checked:
Approved:
IMPORTANT:
Information in this document is subject to change without notice.
To confirm the current revision status of this manual, visit the JAC website:
www.jupiteravionics.com
JAC
CPM
06-23-17 JAC
KDV
06-23-17

JA73-001 Tray Mount Glove Box - 3 Inches High
Installation Manual
Rev A Page iii
Table of Contents
SECTION 1 - DESCRIPTION...........................................................................................................................................1
1.1 System Overview..............................................................................................................................................1
1.2 Features Overview............................................................................................................................................1
1.3 Specifications....................................................................................................................................................1
1.3.1 Mechanical Specifications ........................................................................................................................1
SECTION 2 – INSTALLATION........................................................................................................................................2
2.1 Introduction.......................................................................................................................................................2
2.2 Continued Airworthiness...................................................................................................................................2
2.3Unpacking and Inspecting Equipment..............................................................................................................2
2.3.1 Warranty .......................................................................................................................................................2
2.4 Installation Procedures .....................................................................................................................................2
2.4.1 Mechanical Installation .................................................................................................................................2
2.5 Installation Kit ...................................................................................................................................................2
2.6 Installation Drawings.........................................................................................................................................2
Appendix A - Installation Drawings........................................................................................................................... A1
A1 Installation Drawings.......................................................................................................................................A1

Rev A Page 1
JA73-001 Tray Mount Glove Box - 3 Inches High
SECTION 1 - DESCRIPTION
1.1 System Overview
The JA73-001 Tray Mount Glove Box – 3 Inches High allows the aircraft owner/operator to utilise an unused portion of
the instrument panel for temporary storage.
1.2 Features Overview
The JA73-001 interior has a black anodized finish and the front plate has a baked-on flat black urethane paint finish to
resist scratches and nicks during use.
The JA73-001 fits a standard 6.25” tray mount space, and has pre-drilled and tapped holes for easy installation.
1.3 Specifications
1.3.1 Mechanical Specifications
Refer to Mechanical Installation drawing for all dimensions
Height 3.01 in [76.5 mm] maximum
Overall depth 5.30 in [134.6 mm] maximum
Width 6.26 in [159.0 mm] maximum
Storage opening: Height 2.60 in (66 mm) max
Width 5.10 in (129.5 mm) max
Depth 5.20 in (132.1 mm) max
Weight 1.36 lb [0.62 kg] maximum
Material Black anodized 5052-H32 aluminum
Mounting 8 x 6-32 fasteners
Bonding ≤ 2.5 mΩ
Load capacity 1.0 lb [0.45 kg] maximum
Installation kit part number N/A

Rev A Page 2
JA73-001 Tray Mount Glove Box - 3 Inches High
SECTION 2 – INSTALLATION
2.1 Introduction
This section contains unpacking and inspection procedures, installation information, and post-installation checks.
2.2 Continued Airworthiness
Maintenance of the JA73-001 is on condition only. Scheduled inspection and/or periodic maintenance of this unit is
not required.
2.3 Unpacking and Inspecting Equipment
Unpack the equipment carefully. Check for shipping damage and report any problems to the relevant carrier. Confirm
that the Authorized Release Certificate or Certificate of Conformance is included. Complete the on-line warranty card
from the Jupiter Avionics Corporation (JAC) website – www.jupiteravionics.com/warranty.
2.3.1 Warranty
This product manufactured by JAC is warranted to be free of defects in workmanship or performance for 2 years from
the date of installation by an approved JAC dealer or agency. This warranty covers the cost of all materials and labour
to repair or replace the unit, but does not include the cost of transporting the defective unit to and from JAC or its
designated warranty repair centre, or of removing and replacing the defective unit in the aircraft. This warranty does
not cover failures due to abuse, misuse, accident, or unauthorized alteration or repairs.
Contact JAC for return authorization, and for any questions regarding this warranty and how it applies to your unit(s).
JAC is the final arbiter concerning warranty issues.
2.4 Installation Procedures
2.4.1 Mechanical Installation
The JA73-001 can be mounted in any attitude and location with adequate space.
2.5 Installation Kit
N/A
2.6 Installation Drawings
The drawings and documents required for Installation can be found in Appendix A of this manual.

Rev A Page A1
JA73-001 Tray Mount Glove Box - 3 Inches High
Installation Manual
Appendix A - Installation Drawings
A1 Installation Drawings
DOCUMENT Rev
JA73-001 Mechanical Installation A

CENTER OF GRAVITY
WEIGHT: 1.36 lbs [0.62 kg] MAX.
0.03in [0.8mm]
0.44in
11.2mm 2.44in
62mm
3.94in
100.1mm
4.53in
114.9mm
0.75in
19.1mm
1.30in
33mm
2.81in
71.2mm
3.13in
79.4mm
6.26in MAX
159.0mm MAX
66mm
2.60in
5.10in
129.5mm
3.01in MAX
76.5mm MAX
mounting holes
#6 counter sunk
(Inside surface)
Typical Mounting Offset Additional mounting
support holes
Tapped 6-32 x 4
0.75in
19.1mm 2.25in
57.2mm
6-32 Locking Nut
6-32 Countersunk Screws
6-32 Pan Head Screw
Existing Tray Supports
Typical Installation
Installation Panel
5.30in MAX
134.6mm MAX
CONFIDENTIAL & PROPRIETARY
0.5 DEG
JUPITER AVIONICS TEMPLATE SOLIDWORKS LANDSCAPE SIZEB REV B.DRWDOT JA73-001 Mechanical Installation Rev A.SLDDRW
DOC. NO.
1/1
SHEET
JA73-001
PART NO.
TITLE
DRAWING NOT TO SCALE
TO JUPITER AVIONICS CORP.
APPROVED
CHECKED
TATPREPARED
N/AN/A
MATERIAL:
FINISH:
NCAGE CODE
L00N3
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN INCHES
ANGLES ARE IN DEGREES
TOLERANCES:
1 DEC PLACE: 0.1
2 DEC PLACE: 0.01
3 DEC PLACE: 0.005
ANGLES: Tray Mount Glove Box - 3 Inches High
JAC
CPM
06-21-17
JAC
KDV
06-21-17