Tongue Button
L
Battery compartment
1.This product is a 2.4G Remote control dragon with color changing lights and sounds.
2. Turn on the switch under Robodragon. The lights will start ashing red. Turn on the switch on the remote. Once the remotes syncs,
Robodragon will light up green and it’s tail will swing. When not in use, Robodragon will change colors and wag its tail.
3. Everytime you press the color change button, Robodragon will light up a dierent color and wag his tail. (12 dierent color variations)
4. Press left lever to move Robodragon foward or backwards. Press the right lever to move Robodragon left and right.
5. Place the food tokens at a proper distance from Robodragon. Press the tongue button on the remote control. Robodragon will open it’s
mouth and his tongue will extend to pick up the food token. Robodragon will also make one of 5 dierent sounds.
6. When the batteries in Robodragon are running low, the lights will ash and it’s tongue will not activate. When this happens, replace
the batteries.
7. When the batteries in the remote are running low, the light on the remote will ash. When this happens, replace the battteries.
8. Robodragon will automatically turn o if you stop using it for 5 minutes.
Robodragon lost
function or it is walking
slowly.
- The battery is not connected well.
- Battery is running low.
- The power switch is not in the “ON” position.
- The remote control and Robodragon are not synced.
- Check battery connection
- Replace batteries with new ones.
- Push the power switch to the“ON”position
- Turn both the remote and Robodragon o, then
back on.
- Sync the remote with Robodragon again.
Manufactured by: Jupiter Creations, Inc.
NewYork, NY 10018 Made in China
© 2021 Jupiter Creations, Inc. NewYork, NY 10018
All rights reserved.
For customer support, visit: wwv.jupitercreations.com
Problem Reason Correction
