Jushengtimes 323 User manual

Car DVR 323
User Manual
Production introduction
Product structure.
1) Select down button 2) Mode selection button 3) OK selection button
4) Select up button 5) Power switch button 6) TF card slot
7) bracket 8) USB interface 9) horn
10) camera 11) reset key
Key function description:
1) Select down button
Menu options, select the function key down
In standby or camera state, press this key to achieve microphone turn on / off function
2) Mode selection button
Press this key to switch between camera / photo / playback;
Long press this key to output function settings menu; consecutive short press this key can
switch between the settings
Press this key in video state to lock files during video recording
3) OK selection button
FCC ID: 2AS7I-323

Video and photo confirmation button, camera mode, short press this key to start recording,
again short press stop recording
Image; short press this button to take photos in photo mode; confirm button in menu mode;
4) Select up button
In the menu option, select the function key up;
Long press 3 seconds to enter WiFi mode, short press 3 seconds exit
5) Power switch
Long on / off machine, short press screen
6) TF card slot
Memory card slot
7) support
Slot for mounting bracket
8) USB interface
The USB interface 1 is used for connecting PC to transmit data for connecting an external
power source to charge the battery or to provide a working power source;
9) loudspeakers
Keystroke or playback audio speaker
10) Lens
View window
11) reset button
Restart the machine
 Special function description:
 G-sensor function
When gravity accelerates, the machine automatically saves the video of the accident as a
non-delete file.
G-sensor gravity induction can be adjusted in the menu high-medium-low factory default;
Automatic on / off
After supporting the connection of on-board power, the car starts the video automatically,
saves the video automatically and shuts down the machine.
Basic operating instructions for camera / photo:
Boot and shutdown
Long press the power switch button to turn on, the blue indicator light will be turned on when
the machine is turned on;
Once again press the power switch button is off, this time the blue indicator lights out;
Note: the video recorder automatically shuts down when the battery voltage is low
Camera mode
Short press mode selection button, switch to camera mode, the upper left corner of the
screen display image icon;
Press OK selection button to start the camera, while the video indicator began to flicker,
marking the video work;
Photo mode
Click mode to select button, switch to photo mode, the upper left corner of the screen
shows the photo icon;

Press the OK button to take photos. When the picture is taken, the screen stops.
Video / photo playback
Select button by short press mode, switch to playback mode, display playback icon in
upper left corner of screen;
The file can be selected up by pressing the up button.
The file can be selected down by pressing the selection button.
Press OK selection button to play the selected video file;
Menu setting
Long press the mode to select the button, out of the settings menu;
By pressing the up selection button or the down selection button, you can loop up and down in
each setting item;
Select the settings that need to be changed and enter the change by pressing the OK
selection button short;
Exit settings menu
Press the mode to select the button continuously, exit the setting state;
Time setting
Enter the setting item by a continuous long press mode selection button, select a date
setting by a short push up selection button, press OK selection button to enter, press OK
selection button, and switch between years / months / day / hour / minute / second, Adjust the
required value by selecting the button up or down, press OK selection button to confirm the
modification;
WIFI connection and APP installation and usage instructions:
1) the LCD screen displays the WiFi icon 3 seconds after the boot up button is pressed.
2) turn on Android smartphone WiFi. search device (HDCarDVR) on the WiFi network
3) to be properly connected to the mobile phone
4）Use your phone to scan the QR code that comes with this guide and select your mobile
system

weixin
Click download install app, Android phone please select 'safe download' iOS system will
automatically jump to APP Store for download
5) Open the app and click on the WiFi icon below to connect as follows:
6) after the connection is successful, you will see a real-time picture of the recorder as shown
in the following figure
1. Recorder function settings icon 2. Recorder battery icon 3. Microphone icon
4. Playback folder icon 5. Video indicator icon 6. Real time picture
7. Disconnect the WiFi icon 8. Video photo icon 9.Video pixel
10. Video time 11. Video / photo conversion settings icon

APP interface icon usage instructions:
1. Logger function settings icon: click into the recorder to set menu functions
2. Recorder battery icon: view the battery charge of the recorder battery
3. Microphone icon: click set CarLog sound on / off
4. Replay folder icon: click to view the video and photograph pictures online and download
them to your phone
5. Video indicator icon: this icon flashes while recording
6. Real-time picture image: real time picture image window
7. Disconnect WiFi icon: click to disconnect WIFI
8. Video photo confirmation icon: click in video mode to record, click in photo mode to take
pictures
9. Video pixels: video pixel and frame rate display
10. video time: the display time of the video
11. Video / photo conversion settings icon: click in to set up video / photo switch
 Battery usage instructions
 For battery charge indication, please refer to the icon:
Fully charged Lower power consumption Low battery Low battery
There are three ways to charge the battery. The red charge indicator lights up during the
charging process, the full charge time is about 180 minutes, and the red charging indicator
lights are automatically extinguished after the charge is completed.
1: charge using power adapter
2: charging using PC-USB
3: charge with on-board power supply

Note: when the use of this product due to improper operation caused by the phenomenon,
press reset button and then boot, can resume normal
 Products specifications:
Features HD Camera, HD Video
G-sensor Built-in (car accident case of emergency save, will not be
deleted)
LCD screen size 2.0 inch
Len 120 degree A + grade high-resolution ultra-wide-angle lens
Language Russian, English, Chinese (simplified), Chinese (Traditional),
Korean, Japanese, etc…
WIFI Built-in 2.4Ghz WLAN module
Video format AVI
Color standard
Continuous loop video seamless loop recording, don’t leak second
On-board switch machine Support auto ignition boot, turn off shutdown
Motion Detection support
(Y/M/D/H/M) support
Photo format JPEG
Memory card TF (max 32GB)
MIC support
USB function USB-Disk
Built-in stereo support
Infrared night vision support
Power interface 5V 1A
Battery Built-in polymer battery
For problems in normal operating situation ,please try these methods below:
 The APP screen is not smooth or can't view the phone in real time. Too many
mobile phones are too far away from the recorder.
 Can’t take photo and recording
Check the if the TF card has enough space or locked
 Automatically stop when recording
Use the compatible high-speed TF card with SDHC because of big HD video data, the
high-speed TF card have identifying of C4 and C6
 Appear “files error” when replay photo or video
Uncompleted files because of TF card storage error, please use formatting function to
format your TF card
 Unclear video
Checks if there are any dirt or fingerprint; and use lens paper to clear the camera len.
 Black image when recording sky or water scene
Scenes with big contrast will influence the automatic exposure function of camera; you
can adjust “EV in setting mode to correct.

Color is not perfect in cloudy day and outdoor light
Set the “white balance” function to automatic
cross stripe interference in image
Because of wrong “light frequency”, please set it to 50Hz or 60Hz according to the local
power supply frequency
Crash
Restart by pressing shortly on” RESET” button after crash

20C