JVC GY-DV550E - Studio Dv Camcorder User manual

STUDIO DV CAMCORDER
The first DV camcorder in the world
with full CCU control
GY-DV550E

1/2"3-CCDDVCamcorder
withFullCCUControl
26-PinInterface
GY-DV550E

As the world’s only DV camcorder to offer full CCU control and have features like 26-
pin remote, TelePrompTer and intercom, the GY-DV550E – or Studio DV Camcorder –
functions exceptionally well as both a full bandwidth (800+ lines) broadcast-standard
studio camera and a powerful ENG camcorder. And though it’s ideal for broadcasters,
it’s priced within reach of virtually everyone.
The Studio DV Camcorder offers all the features,
capabilities and accessories you’d expect from a
CCU-controllable camera – plus the ability to
operate in an ISO-cam environment. In addition
to its top-notch performance specs, the Studio
DV offers it all: a standard 1/2-inch bayonet
mount (that accepts virtually every professional
lens available), bi-directional IEEE 1394, two
48 kHz 16-bit
digital PCM
audio
channels
and a built-
in EBU
time code
reader/generator. Connectivity is outstanding – with
XLR microphone inputs, audio outputs, headphones
output and both composite and Y/C outputs. And,
because it’s MiniDV, the Studio DV Camcorder offers the
industry’s widest compatibility, with the ability to play back
recordings on DVCAM and DVCPRO.
Maximum versatility, exceptional performance and superior
value make the Studio DV the smart choice for any
professional who needs a camcorder that will consistently
deliver in the studio, the field – or both. It’s clear to see why
JVC’s Studio DV outperforms anything in its class.

1/2"3-CCDDVCamcorder
withFullCCUControl
26-PinInterface
GY-DV550E
The GY-DV550E is the only DV camcorder in the world
to offer full CCU control. With its 26-pin interface, the
GY-DV550E can be used in a studio environment where
multiple remote camera and ISO-Cam operations are
required. This interface allows the user to connect a
remote controller or external data storage system. In
addition, recording on DV benefits customers who use
this system either in live broadcast situations, live
webcasting, or ENG applications, as well as
assignments where post-production work is required
later. Because you can take advantage of its superior
picture and sound performance in a studio environment,
DV makes it possible to put together a fully digital end-to-
end system that’s reliable and cost-efficient.
The EFP connects
directly to the GY-
DV550E, giving you the
ability to adjust video
parameters at any time
during the production.
EBU TC input/output
Genlock input
AUX input(compositevideoinput)
26-pin interface
Ready for EFP
remote control (RM-LP57/LP55)
Return video output for
TelePrompTer output
1/2" bayonet lens mount
System flexibility EBU TC connectors are
provided, allowing you to
synchronise simultaneous
shooting with multiple
camcorders.
To meet increasing demand for a
digital camcorder that can easily be
incorporated in complex production
systems, the GY-DV550E is
equipped with a genlocking function
that includes SC lock to ensure high-resolution pictures.
For added convenience, the genlock input connector
doubles as a composite video input, so you can use the
GY-DV550E as a standard video recorder. This
connector can be used for camera pool applications as
well.
The GY-DV550E can display
return video signals
from the CCU or an
external VTR on the
viewfinder or
TelePrompTer
signals from
the camera
control unit may
be output via a BNC
connector,
assuring full support for studio programme production.
The GY-DV550E uses a
standard professional 1/2"
bayonet lens mount, making it
compatible with
the widest
selection of
lenses.

IEEE 1394 (Firewire) input/output
compatible with most NLE systems
System
application
Full CCU control
RM-P210 camera remote controller
GY-DV550E
DV (IEEE1394) connector
DV Interface
BR-DV600E
NLE
Camera control
Camera remote controller
(RM-P210)
GY-DV550E
Portable recorder
Backup recording
26-pin
camera cable
The GY-DV550E is the industry’s first DV camcorder to offer
full CCU control (including Iso-Cam operation), allowing you
to use it as the base for a full-fledged studio system.
●
Allows remote operation of the GY-DV550E camcorder
from a distance of up to
100 meters (328 ft.)
● Accepts JVC or Sony 26-pin CCU cables when used in
combination with the GY-DV550E
● Full access to camera menus, function controls and camera
setup parameters
● Dynamic or carbon equivalent RTS/2-wire compatible intercom
● Front panel built-in genlock controls
● Serial data communications for more reliable and accurate
communications between the camera and RCU
● Multiple outputs (R/G/B component for computer graphics and
keying, plus Y/R-Y/B-Y component for system or Y/C358 for
S-VHS)
● Gain select switch with variable gain function
● 4 programmable function buttons for quick access to menu items
● LCD read out at the base station for easy menu navigation and
simple operation
This allows high-quality compressed digital video signal
transfer directly to a computer, a non-linear editing
system, or to another DV recorder. Producers can now
digitally spool directly to a non-linear editing platform
without loss, and then transfer the finished product
directly back to video tape using the camera alone.
Using the 26-pin camera cable, you can connect the GY-
DV550E to a portable recorder for backup in the
field or to a camera remote controller for use in
studio.
Maximum transmission distance
Attached VF RM-P200 RM-P210 RM-P300
GY-DV550E VF-P115 (1.5 inches) 100 m (328 ft) 100 m (328 ft) 300 m (656 ft)
VF-P400 (4 inches) 100 m (328 ft) 100 m (328 ft) 300 m (656 ft)
*1 Iso-Cam capability is not available when the VF-P400 is used. This capability is available using a standard local power supply.
*2 Iso-Cam capability is not available when the transmission distance exceeds 200 m.
This capability is available using a standard local power supply.
Internal adjustment is required depending on the transmission distance. Please contact your JVC dealer for details.
Connectable CCUs
*1*2

Professional camera features
State-of-the-art
1/2" 3-CCD image pickup
LOLUX 0.75 lux
Super Scene Finder (SSF™)
Viewfinder status display
Convenient menu dial
Bi-colour tally lamp
Intercom function
A JVC exclusive, Super Scene Finder lets you log scenes automatically or manually in
the field while shooting, and optionally mark the best ones. The SSF data for the last six
tapes is retained in the camcorder’s non-volatile memory. Data for up to 134 scenes
may be permanently stored on the head of the corresponding tape. The camcorder
possesses an RS-232 port for controlling the tape mechanism and downloading the
scene data to a PC running logging software. Super Scene finder dramatically speeds
up and simplifies not only the production, but also the NLE transfer process and saves
disk space, because you digitise only those scenes you need for editing.
The viewfinder status display uses characters and menus to display selected
information in the viewfinder. For example, 4:3 or 16:9 safe area, time code/tape
remain, F stop, battery condition, shutter speed, zebra pattern for skin detail and
brightness indication are all displayed, as well as various events, camera setting status,
recorder operation, and selected setup parameters.
Quickly and easily navigate through the viewfinder menu or set the shutter speed with
the convenient menu point and click dial.
The tally lamp flashes during preroll and lights when the camcorder is in the record
mode. The tally lamp lights green when the camera is selected on the preview bus and
red when it’s selected on the programme bus. You can switch the lamp on or off as
required.
Clear and easy–to-see even in the dark, this display shows operation status and
warning indicators including audio level indicators, remaining tape/battery power display,
time code reader/generator indication, menu setting and time date display.
Compatible with carbon or dynamic headset microphones, this function can be switched
on and off as required.
●Full auto shooting ●Precision "accu-focus" mode ●Continuous auto black (CAB)
●Automatic level control (ALC) ●Variable scan view ●Black stretch/compress ●Built-
in phantom microphone power ●Adjustable detail frequency ●Adjustable gamma point
●Time code reader/generator ●Time/date stamp ●Skin tone detection ●Auto knee
High-quality performance
DV recording on a MiniDV tape
Letterbox 16:9
User-friendly design
*With an MDV-80 tape.
To ensure the best possible image quality, the GY-
DV550E incorporates three 1/2" 440,00 active pixel
interline-transfer CCDs. Each CCD is equipped with
highly advanced circuitry that
virtually eliminates vertical smear
when shooting bright lights in a
dark room. Lag and image burn
are also reduced to indiscernible
levels, while high sensitivity of F11 at 2000 lux assures
creative flexibility and simplifies lighting requirements.
When activated, the LOLUX
mode increases sensitivity with
almost no increase in noise.
LOLUX lets you shoot in low light
conditions, so you can capture
high-quality video
footage with excellent
colour balance at just
0.75 lux illumination.
1/2"3-CCDDVCamcorder
withFullCCUControl
26-PinInterface
GY-DV550E
Audio area
Sub code area
Tape pattern
Video area
Tape running direction
Head
scanning
direction
Lolux ON
OFF
Back-lit LCD display
The GY-DV550E combines the convenience and
affordability of MiniDV with the high-quality camera
performance you need for professional use. Up to 80
minutes* of high-quality 8-bit, 13.5 kHz, 4:2:0 DV
component digital images can be recorded on a single
MiniDV tape, assuring you the high-quality, non-
degradable images you need for top results in post-
production editing. Outstanding horizontal resolution of
800 lines is achieved at not
only the camera output but
also at the video signal
outputs including the 26-pin
connector.
To complement its superior pictures, the GY-DV550E
offers outstanding digital PCM sound. Audio signals are
locked with video signals for smooth editing. You can
choose from two 16-bit 48-kHz channels or two 12-bit,
32-kHz
channels with a dynamic range of more than 85 dB .
Three XLR connectors provide line or microphone input
level with selectable phantom power, while three audio
REC level
controls on the
front and the
side can be
used to adjust
the recording level.
The screen can be switched between 4:3 and 16:9,
allowing you to record signals with the aspect ratio
appropriate to the application.
High-quality PCM digital audio

12 131415 26 46
72 8529 44 4745
27 28
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Controls, indicators, connectors
■Top section
1Viewfinder mount base, sliding securing ring
2[VF] viewfinder connector (6-pin)
3[AUDIO IN FRONT] audio input front connector
(XLR 3-pin)
4[LENS] lens control connector
5[ZEBRA] switch
6[VTR] trigger button
7[AUDIO LEVEL CH-1] CH-1 recording level
control
8[AUTO WHITE/ACCU FOCUS] switch
9[TAKE] button
10 Lens mounting ring/lens lock lever
11 [FILTER] colour temperature conversion filter
control knob
12 [ALARM] volume control
13 [MONITOR] audio monitor volume control
14 [STATUS] status/menu button
15 [SHUTTER/MENU] dial
16 [LOLUX] LOLUX on/off button
17 [BLACK] black stretch/black compression switch
18 [FULL AUTO] full auto shooting ON/OFF button
and indicator
19 [AUTO IRIS] auto iris level switch
20 [GAIN] switch
21 [VTR SAVE/STBY] switch
22 [OUTPUT] colour bar/camera/auto knee switch
23 [WHT.BAL] white balance switch
24 [NG] button
25 [POWER] switch
26 Monitoring loudspeaker
27 [CH1 AUDIO LEVEL] CH1 recording level
control
28 [CH2 AUDIO LEVEL] CH2 recording level
control
29 [MONITOR SELECT] audio monitor selector
switch
30 [CH-1 AUDIO SELECT] selector switch
31 [CH-2 AUDIO SELECT] selector switch
32 [CH-1 AUDIO INPUT] selector switch
33 [CH-2 AUDIO INPUT] selector switch
34 [VTR INPUT] setting switch
35 [VTR SELECT] VTR setting switch
36 [MENU] button
37 [HOLD/GROUP] button
38 [SHIFT/ITEM] button
39 [ADVANCE/SELECT] button
40 [PRESET/DATA SET] button
41 [CONTINUE] button
42 [TC GENE] time generator setting switch
43 Lithium battery installation compartment
44 [OPERATE/WARNING] indicator
45 [RESET] button
46 [LIGHT] switch
47 [COUNTER] switch
48 Audio level meters
49 SP indicator
50 32K/48K sampling frequency indication
51 [AUD LOCK] indicator
52 [MENU] indicator
53 [WIDE] indicator
54 Cassette indicator
55 [REMAIN] indicator
56 Tape transport direction indicators
57 Remaining battery power display
58 Counter display
59 Time code-related indications
(SLAVE/PB/NDF/HOLD)
60 Warning indicators (AUTO OFF/DEW
/SERVO/RF/LI)
61 Cassette cover
62 [MONITOR OUT] connector (BNC)
63 [Y/C OUT] connector (4P)
64 [TC IN] connector (BNC)
65 [TC OUT] connector (BNC)
66 [LINE OUT CH-1/CH-2) connector (RCA)
67 [VIDEO OUT] connector (BNC)
68 [GENLOCK/AUX IN] connector
69 [VTR REMOTE] connector
70 Microphone attachment holes
71 [EJECT] switch
72 Operation cover
73 [PLAY] button
74 [STOP] button
75 [STILL] button
76 [REW] button
77 [FF] button
78 [LOG] button
79 [POWER] power source setting switch
80 [CALL] button
81 [INCOM MIC] intercom microphone ON/OFF
switch
82 [INTERCOM MIC LEVEL] intercom microphone
volume
83 [INCOM MIC] intercom microphone setting
switch
84 [MODE] setting switch
85 Tally lamp
86 [VTR/RM] VTR/RM multi-pin connector (26P)
87 [PROMPTER OUTPUT] connector
88 [DV] connector
89 [EARPHONE] jack
90 [DC OUTPUT] connector
91 [AUDIO IN REAR] connector (XLR 3-pin)
92 [AUDIO IN REAR LINE/MIC] AUDIO IN REAR
select switch
93 [AUDIO IN FRONT LINE/MIC] AUDIO IN
FRONT select switch
94 [INTERCOM] input terminal (XLR 5-pin)
95 [DC INPUT] connector (XLR 4-pin)
96 Battery holder
97 Battery holder lock release knob
98 [BREAKER]
■Right side section — audio setting
■Front section
■Right side section — camera setting
■Right side section — VCR setting
■Right side section — VCR display
■Left side section
■Rear section
■Adapter section
System configuration
1 2
3 4
7061
62
63
64 65 66 69 67 68 67
10
8
9
5
11
86
87
16
20 2524
22
23
18 17
19
21
92 93
96
97
88
89
90 91
98
94 95
81
84
83
82
80
79
48 60 594950
5553 52
51 58
575654
30 31 32 33
37 38 39 4035 3443
42 36 41
71
78
74
77
73
75
76
KA-A40U
VF-ADAPTER
/RM-LP57U

Specifications
DISTRIBUTED BY
■General
Power requirement: DC 10.5 V to 17 V
Power consumption: Approx. 20 W (w/o viewfinder)
Dimensions: 336 (W) x 245.5 (H) x 124 (D) mm (13-1/4" x
9-11/16" x 4-15/16")
Weight: 5.8 kg (12.8 lbs.) (main unit only)
Temperature
Operating: 0°C to 40°C (32°F to 104°F)
Storage: -20°C to 60°C (-4°F to 140°F)
Humidity
Operating: 30% to 80% RH
Storage: 85% RH or less
■Camera section
Image pickup device: 1/2" interline-transfer CCDs
Colour separation optical system: F1.4, 3-colour separation
prism
Number of effective pixels: 440,000 (752 (H) x 582 (V))
Colour system: PAL (wide-band R-Y, B-Y encoder)
Colour bars: EBU type
Sync system: Internal sync, external sync (VBS)
Lens mount: 1/2" bayonet system
Optical filter: 3200K, 5600K + 1/8ND, 5600K + 1/64ND
Sensitivity: F11, 2000 lux
S/N: 62 dB or more (available through 26-pin)
Resolution: More than 750 lines
Gain: -3, 0, 6, 9, 12, 18 dB, variable gain in ALC and
LOLUX
Minimum illumination: 0.75 lux with F1.4, LOLUX
Registration: 0.05% or less (excluding lens distortion)
Detail correction: Horizontal and vertical dual-edged
Electronic shutter variable range:
Standard value: 50 Hz
Fixed values: 120, 250, 500, 1000, 2000 Hz
Variable scan: 50.1 to 2067.8 Hz
■VTR section
Format: DV format
Signal format: PAL
Usable tape: MiniDV tape
Tape speed: 18.831 mm/sec. (SP mode)
Record/play time: 60 minutes or more (with an MDV-60
tape)
FF/rewind time: Within 120 sec. (with an MDV-60 tape)
[Video]
Video signal recording format: 8-bit, 13.5 MHz, 4:2:0
component recording
[Audio]
Audio signal recording format: 16-bit, 48 kHz or 12-bit, 32
kHz PCM for 2 channels
Frequency response: 20 Hz to 20 kHz (16-bit), 20 Hz to
14.5 kHz (12-bit)
S/N: 60 dB or more
Dynamic range: 85 dB or more
[Connectors]
Video output: 1.0 Vp-p, 75 ohms (BNC) (composite video
signal)
Y/C output: Y/C signal, 4-pin, 75 ohms, unbalanced
Audio inputs (AUDIO 1, AUDIO 2)
MIC: -60 dBs, low impedance (XLR), balanced
LINE: +4 dBs, 10 kohms, balanced
Line outputs (LINE 1, LINE 2): -6 ±1 dBs, low impedance
(RCA), unbalanced
IEEE 1394 interface: 4-pin
RS-232C interface: Mini DIN 6-pin
VF connector: 6-pin
Genlock/video input: BNC
Earphone jack: Stereo mini-jack (monaural)
■Accessories
Instruction manual
Tripod mounting plate
Microphone
BR-DV600E Professional DV recorder/player
Options
Dimensions
VF-P115BE
1.5" viewfinder 1.5" viewfinder 4" B&W viewfinder
●DV recording on a MiniDV tape
●PCM digital audio
●Various video inputs/outputs (IEEE 1394 input/output, composite/YC/component inputs/outputs)
●RS-422 interface/JVC bus interface and optional RS-232C interface
●Super Scene Finder
●Insert/assemble editing and audio dubbing (usable functions vary depending on the editing controller used)
●EBU-standard LTC time code generator
14:1 power zoom lens (Fujinon)
19:1 power zoom lens (Fujinon)
14:1 power zoom lens (Canon)
18:1 power zoom lens (Canon)
AC power adapter/charger
VF-P116E VF-P400E
MV-P615U
Monaural microphone with
XLR conector
For attachment,
the KA-A50U adapter
is required.
Manual focus control
for Canon lens
HZ-FM13UHZ-ZS13BU HZ-FM15U
S14 x 7.3B12U
S19 x 6.5B12U YH14 x 7.3K12U YH18 x 6.7K12U
AA-P250E NP-1 type battery
Design and specifications subject to change without notice.DVCAM and DVCPRO are trademarks of their respective owners.
VICTOR COMPANY OF JAPAN, LIMITED
KCS-8362B CEDV550EN0104
Printed in Japan
■The Hachioji Plant of Victor Company of Japan, Ltd., has received ISO14001 and ISO9001 Certifications
under the global standard for environmental management.
A wide range of options are available to expand the flexibility of this camcorder.
245.5
336 124 m/m
For attachment,
the KA-A40U
adapter is required.
Manual focus control for
Fuinon lens(excluding
S14 lens)
Zoom servo/trigger
control(Fujinon/Canon
lenses)
JQA-0288