JVC GZ-MG365U User manual

LYT1829-001A
STRUC ONS
MANUAL DE INSTRUCCIONES
HARD DRIVE CAMCORDER
VIDEOCAMARA CON DISCO DURO
GZ-MG365
GZ-IVlG335
GZ-MG330
Dear Customer
Thank you for purchasing this hard
disk camera, Before use, please read
the safety information and precautions
contained in pages 2 and 3 to ensure
safe use of this product.
For Future Reference:
Enter the Model No, (located oil the
bottom of the camera) and Serial No.
(located on the battery pack mount of
the camera) below.
Model No,
Serial No.
|
miCPO _
Apreciado cliente
Muchas gracias por haber adquirido
esta camara con disco duro integrado.
Antes de usarla, lea la informaci6n de
seguridad y las precauciones contenidas
en las paginas 2 y 3 para garantizar un
uso seguro de este producto.
Para futuras consultas:
Escriba a continuaci6n el numero
de modelo (situado en la base de la
c&mara) y el numero de serie (situado
en el compartimiento de la bateria de
la camara),
Nurnero de rnodelo
Nurnero de serie |

OAttachthebatterypack Open the lens cover
oo1_ °°
Video recording
Select _ (video)mode Select recording(gEC) mode
The camera turns on automatically.
°°
Select _&1(video)mode Select playback(PLAY)mode
to displaythumbnailson the
scree[i
oo1_ °°

iiiiii_,
iiiiii r"-
0 Open the LCDmonitor
The camera turns on automatically.
° °1_
o°_
Pressthe START/STOPbuttontostartrecording
%1
Select the desiredfile usingthetouch sensor.And then
touchtheOK buttonto startplayback
o°1_ •To stop playback
Select m.

Safety Precautions
lightningflash with arrowheadsymbol,w_hin an
equilateraltriangle, isintendedto alert theuser to the
exclamation point within an equilateral tdangle is
p_esence of important
operating and maJntenarce (servicingt instluctiol_s in
WARNING: TO PREVENT FiRE OR
SHOCK HAZARD, DO NOT EXPOSE THIS
UNITTO RAiN OR MOISTURE.
NOTES:
•The rating plate and safety caution are oil the
bottom and/or the back of the main unit.
• The serial number plate is on the battery pack
mount.
® The rating information and safety caution of the
AC adapter are on its upper and lower sides.
Caution on Replaceable lithium battery
The battery used in this device may present a fire
or chemical burn hazard if mistreated.
Do not recharge, disassemble, heat above 100_'C
or incinerate.
Replace battery with Panasonic (Matsushita
Electric), Sanyo, Sony or Maxell CR2025.
Danger of explosion or Risk of fire if the battery is
incorrectly replaced.
• Dispose of used battery promptly.
• Keep away from children.
® Do not disassemble and do not dispose of in
fire.
For USA-California Only
This product contains a CR Coin Cell Lithium
Battery which contains Perchlorate Material
-special handling may apply.
See www. dtsc. ca. gov /hazardouswaste/perchlorate
When the equipment is installed in a cabinet or on
a shelf, make sure that it has sufficient space on
all sides to allow for ventilation (10 cm (3-15/16 ")
or more on both sides, on top and at the rear).
Do not block the ventilation holes.
(If the ventilation holes are blocked by a
newspaper, or cloth etc. the heat may not be able
to get out.)
No naked flame sources, such as lighted candles,
should be placed on the apparatus,
When discarding batteries, environmental
problems must be considered and the local rules
or laws governing the disposal of these batteries
must be followed strictly.
The apparatus shall not be exposed to dripping
or splashing,
Do not use this equipment in a bathroom or
places with water.
Also do not place any containers filled with water
or liquids (such as cosmetics or medicines, flower
vases, potted plants, cups etc.) on top of this unit.
(If water or liquid is allowed to enter this
equipment, fire or electric shock may be caused.)
Do not point the lens directly into the sun. This
can cause eye injuries, as well as lead to the
malfunctioning of internal circuitry. There is also a
risk of fire or electric shock,
CAUTION!
Tile following notes concern possible physical
damage to the camera and to the user.
Carrying or holding the camera by the LCD monitor
can result in dropping the unit, or in a malfunction.
Do not use a tripod on unsteady or unlevel surfaces.
It could tip over, causing serious damage to the
camera.
CAUTION!
Connecting cables (Audio/Video, S-Video, etc.)
to the camera and leaving it on top of the TV is
not recommended, as tripping on the cables will
cause the camera to fall, resulting in damage.
CAUTION:
The mains plug shall remain readily operable.
WARNING:
The battery pack, the camera with battery
installed, and the remote control with battery
installed should not be exposed to excessive heat
such as direct sunlight, fire or the like.

iMPORTANT SAFETY iNSTRUCTiONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install
in accordance with the manufacturer's
instructions.
8. Do not install near any heat sources such
as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
9. Only use attachments/accessories specified by
the manufacturer.
10. Use only with the cart,
stand, tripod, bracket,
or table specified by
the manufacturer,
or sold with the
apparatus.When a cart
is used, use caution
when moving the
cart/apparatus combination to avoid injury from
tip-over.
11. Unplug this apparatus during lightning storms
or when unused for long periods of time.
12. Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way, such
as power-supply cord or plug is damaged,
liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate
normally, or has been dropped.
'_ If this symbol is shown, it is only
valid in the European Union.
Remember that this camera is intended for
)riv_te consumer use only.
Any commercial use without proper permission
is prohibited. (Even if you record an event such
as a show, performance or exhibition for personal
enjoyment, it is strongly recommended that you
obtain permission beforehand.)
Trademarks
® Manufactured under license from Dolby
Laboratories. Dolby and double-D symbol are
trademarks of Dolby Laboratories.
® Windows _ is either registered trademark or
trademark of Microsoft Corporation in the United
States and/or other countries.
® Macintosh is a registered trademark of Apple
Inc.
® Other product and company names included
in this instruction manual are trademarks
and/or registered trademarks of their respective
holders.

Read This First!
How to Select an item Using the Touch Sensor
An example screen in English is used for the guidance below.
[] Selecting an item from the menu list
(on the menu screen) [] Using on-screen buttons (e.g. during playback _" pg. 18)
0
O Slide your finger up and down on the
sensor.
OTouch the OK button.
m
The cursor moves from 1 to 9 on the index
screen when you slide your finger on the
touch sensor.
IZl
I1_IITo select an on-screen button appearing
on the left side, touch the portion of the
sensor next to the on-screen button.
r_To select an on-screen button appearing at
the bottom of the screen, touch the touch
sensor under the on-screen button you
want to select.

f* Make abackup of important recorded data
JVC will not be responsible for any lost data. It is recommended to copy your important
recorded data to a DVD or other recording media for storage. (_ pg. 22)
Make a trial recording
Before tile actual recording of important data, make a trial recording and play back the
recorded data to check that the video and sound have been recorded correctly.
Reset the camera if it does not operate correctly
This camera uses a microcomputer. Factors such as background noise and interference
can prevent it from operating correctly. If the camera does not operate correctly, reset the
camera. (_-. pg. 33)
Precautions on handling batteries
® Be sure to use the JVC BN-VF808U/VF815U/VF823U battery packs.
®If the camera is subjected to electrostatic discharge, turn the power off before using it
again.
If a malfunction occurs, stop using the camera immediately
and consult your local JVC dealer
•If a problem occurs when using the microSD card, take the card together with tile
camera for repair. If one of them is not included, the cause of the malfunction cannot be
diagnosed, and the camera cannot be repaired.
® Recorded data may be erased while the camera is being repaired or inspected. Back up
all data before requesting repairs or inspections.
Because the camera may be used for demonstration in ashop,
the demonstration mode is set to [ON] by default
To deactivate the demonstration mode, set [DEMO MODE] to [OFF] from the MENU.
When connecting the camera to other devices using an
optional DV cable, make sure to follow the procedure below.
Connecting the cable incorrectly may cause malfunctions to
the camera and/or other devices.*
= Connect the DV cable first to the device, and then to the camera.
® Connect the DV cable (plugs) correctly according to the shape of the DV connector.
* This does not apply to the GZ-MG330 model.

Contents
Accessories ............................................ g
How to Use the Everio Dock*. ....................... 9
index ...................................................... 10
indications on LCB Monitor ................. 12
Necessary Settings before Use ........... 14
Charging the Battery Pack ........................... 14
Date/Time Setting ........................................ 14
Other Settings ....................................... 15
Attaching the Shoulder Strap ....................... 15
Checking the Remaining Battery Power ...... 15
Preparing the Remote Control ..................... 15
Recording Files ..................................... 16
Video Recording .......................................... 16
Still Image Recording .................................. 17
Playing Back Files ................................ 18
Video/Still Image Playback .......................... 18
Watching images on TV ........................ 19
Managing Files ...................................... 20
Deleting/Protecting Files .............................. 20
Copying Files ........................................ 22
Using a DVD Burner to Copy Files from the
Camera ...................................................... 22
File Backup on a Windows ® PC ........... 23
System Requirements ................................. 23
Software Installation .................................... 24
Connecting the Camera to the PC ............... 25
File Backup on the PC ................................. 26
File Backup on the PC without Using
Software ..................................................... 27
Other Windows ® PC Operations .......... 28
Getting More Use of the Software ............... 28
Folder Structure and Extensions ........ 29
File Backup on aMacintosh ® .............. 30
System Requirements ................................. 30
Connecting the Camera to the Macintosh ... 30
File Backup on the Macintosh ..................... 31
Customer Support information ........... 32
Troubleshooting .................................... 33
Cleaning ................................................ 34
Warning indications ............................. 35
Specifications ....................................... 36
Cautions ................................................ 38
Terms ..................................................... 40

Accessories
Everio Dock*
CU-VC4U (_ below)
USB Cable
(_-, pg. 22, 25 and
30)
AC Adapter
AP-V18U/14U Battery Pack BN-VF808U
Shoulder Strap CD-ROM Remote Control Unit
(_ pg. 15) (_ pg. 24, 28) RM-V751U (_ pg. 15)
Lithium Battery
CR2025
Pre-installed in the
remote control unit.
Core Filter
m
Make sure to use the provided cables for
connections. Do not use any other cables.
You can connect cables to the connectors of the Everio dock. The connection is completed when
you place the camera on the dock.
Camera Connection S-Video Jack
Terminal AV Jack
DC Jack
DV Jack
USB Jack
m
For the connection using the S-Video jack and DV jack, an optional S-Video cable and DV cable
are needed. Consult the JVC Service Center described on the sheet included in the package for
details on its availability. Make sure to connect the end with a core filter to the camera.The core
filter reduces interference.
• The S-Video cable (optional) enables even higher playback quality on TV. (_-, pg. 19) Be sure
to use the YTU94146A S-Video cable.
* GZ-MG330 model does not include the Everio dock.

index
//
®The LCD monitor can rotate 270°.
180°
90°
® Power-linked operation
You can also turn the camera on/off by
opening/closing the LCD monitor during the
recording mode.
®Be careful not to cover @,_;, @ and/z_
during shooting.
10

3; Touch Sensor (z-, pg. 6)
,_2;OK (DISP) Button [OK/DISP] (_ pg. 13)
,% Menu Button [MENU]
3; Power Switch [POWER]
(You can turn off the camera by pressing
and holding this button.)
,% Speaker
,_6;Playback/Recording Mode Switching
Button [SELECT PLAY/REC] (-, pg. 16)
,%Access/Charge Lamp [ACCESS/CHARGE]
(Blinks when you access files or charge
the battery. Do not turn off the power or
remove the battery pack/AC adapter while
accessing files.)
,_8;Direct DVD Button [DIRECT DVD]
(_, pg. 22)/Title Button [TITLE]
@ Direct Backup Button [DIRECT BACK
UP] (u pg. 26)/Information Button [INFO]
(:-, pg. 15)
10;Auto/Manual Mode Button [AUTO/
MANUAL]
,t_;Video Recording Start/Stop Button [START/
STOP] (u pg. 16)
12;Still Image Shooting Button [SNAPSHOT]
(_ pg. 17)
_$ Zoom Lever [W _,T O.,]
Speaker Volume Control [-VOL+]
(-_ pg. 18)
14;Mode Switch [_, _]
_ DO Jack [DO] (z-, pg. 14)
16;AudioNideo Jack [AV]
_7_,USB (Universal Serial Bus) Jack [ _ ]
(_ pg.22, 25 and 30)
18;LED Light
I_; Camera Sensor
Remote Sensor (_ pg. 15)
_¢ Lens Cover
(2_)Lens
92_Lens Cover Switch [ 0, @ ]
_25Stereo Microphone
_4)microSD Card Slot
_ Stud Hole
9_ Tripod Mounting Socket
% Battery Release Button [BATT.] (_ pg. 14)
@ Battery Pack Mount (_-, pg. 14)
_29Grip Strap
iiiiiiiiiiiiiiiiiiiiiiiii
O Infrared Beam Transmitting Window
0 ZOOM (TAN) Buttons
Zoom In/Out
0 Up Button
Rotate Button (counterclockwise)
(_J pg. 18)
O Skip Backward Button
O Left Button
O Back Button
@ PLAYLIST Button
O START/STOP Button
O SNAPSHOT Button (_J pg. 17)
@ INFO Button (_, pg. 15)
@ Skip Forward Button
PLAY/PAUSE Button
@ Right Button
@ Next Button
@ Down Button
Rotate Button (clockwise) (u pg. 18)
@ INDEX Button
DISP Button
11

indications on LCD Monitor
,q; Selected Operation Mode Indicator
: Auto Mode
: Manual Mode
f2; Effect Mode Indicator
,% Tele Macro Mode Indicator
,% LED Light Indicator
fs_ Program AE Mode Indicator
f6; AV/S-Video Input Jack Indicator*
,_7;Zoom Indicator
,_8;Selected Medium Indicator
f9; Drop Detection Indicator (Appears when
[DROP DETECTION] is set to [OFF].)
_0;Approximate Zoom Ratio
1"_White Balance Indicator
_2;,Manual Focus Adjustment Indicator
_$ Battery Indicator (:-, pg. 35)
14;Date/Time (__, pg. 14)
_;' Brightness Control Indicator
_6;Backlight Compensation Indicator
,_7;Iris Lock Indicator
18;_+: Exposure Adjustment Indicator
[] : Metering Area Control Indicator
_;' Shutter Speed
* This does not apply to the GZ-MG330 model.
3; Mode Indicator
,_2;Counter
,% Picture Quality: _i_ (ULTRA FINE),
[_=I(FINE), [_ (NORMAL), IE_ (ECONOMY)
3; Remaining Time (,:_ pg. 16, 37)
,% • REC: (Appears during recording.)
(_ ,, pg. 16)
• I1| : (Appears during record-standby
mode.)
,_e;Digital Image Stabilizer (DIS) Indicator
(Appears when [DIS] is set to [OFF].)
fT; Wind Cut Indicator
fs; Event Indicator
3; Mode Indicator
f2; Focus Indicator
,% Image Size
,% Picture Quality: FINE (fine) or STD
(standard)
fs_ Remaining Number of Shots (_-, pg. 37)
f6; Shooting Indicator (:J pg. 17)
,_7;Shutter Mode Indicator
,_8;Self-Timer Recording Indicator
12

iiiiiiiiiiiiiiiiiiiiiiiiii
®
3; Mode Indicator (_, pg. 18)
,_2;Effect Mode Indicator
,%Wipe/Fader Effect Indicator
,%_ : Playlist Playback Indicator (Appears
when playing back a playlist.)
GE : Event Search Playback Indicator
(Appears when playing back a video file
from the event search.)
QD : Date Search Playback Indicator
(Appears when playing back a video file
from the date search.)
,% Picture Quality: _ (ULTRA FINE),
[_i_ (FINE), [_ (NORMAL), [_ (ECONOMY)
,_6;Counter
,_7;Playback Mode (_ pg. 18)
: Playback
|| : Pause
_._, : Forward Search
_,q : Reverse Searc
I_- : Forward Slow-Motion
_11 : Reverse Slow-Motion
(The number on the left shows speed.)
,_8;Selected Medium Indicator
@ Drop Detection Indicator (Appears when
[DROP DETECTION] is set to [OFF].)
10;Volume Level Indicator
1"_Battery Indicator (u pg. 35)
@ Date/Time (__, pg. 14)
3; Mode Indicator (_-, pg. 18)
,_2;Effect Mode Indicator
,% Folder/File Number
3; Slide Show Playback Indicator (_ pg. 18)
,_5_Selected Medium Indicator
,_6;Drop Detection Indicator (Appears when
[DROP DETECTION] is set to [OFF].)
,_7;Battery Indicator (_ pg. 35)
,_8_Date/Time (_ pg. 14)
Switching indication modes on LCD
monitor
Each time you touch the DISP button,
indications on LCD monitor switch as
shown below;
In recording mode:
All indications/Indications for selected
functions
In playback mode:
All indications/Only date and time/
No indications
The on-screen function guide is displayed
at the bottom of the screen during menu
display, etc.
13

Necessary Settings before Use
]Close the LCD monitor to turn off the
camera.
®You can also use the camera with just the
AC adapter.
• Please do not pull or bend the AC adapter
plug and cable. This may damage the AC
adapter.
2 Attach the battery pack.
Slide the battery pack down until it locks
in place.
Bottom of the Camera ]Open the LCD monitor to turn on the
camera.
When [SET DATE/TIME!] appears,
select [YES] within 10 seconds.
3Connect the AC adapter.
DC Jack If you do not select within 10 seconds, the
screen disappears. In such case, press
the POWER button and turn the camera
on again.
Set the date and time.
14
AC Adapter
To AC Outlet
(110V to 240V)
® You can also connect the AC adapter using
the Everio dock connector.* (;- pg. 9)
* GZ-MG330 model does not include the
Everio dock.
o The access/charge lamp blinks to indicate
charging has started.
o When the lamp goes out, charging is
finished. Unplug the AC adapter from the
AC outlet and disconnect the AC adapter
from the camera
[] To detach the battery pack
Slide and hold BATT. (_-, step 2), then
remove the battery pack.
[] To check the remaining battery power
See page 15.
[]
[]
Repeat this step to input the month, day,
year, hour and minute.
To change the date and time
1) Touch the MENU button.
2) Select [BASIC SETTINGS], and then
[CLOCK ADJUST].
3) Set the date and time.
To return to the previous screen
Select _::3.
To quit the screen
Touch the MENU button.

Other Settings
iiiiiiiiiiiiiiiiiiiiii!i
iiii,_!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!ii:!_
ckle
q> apGF...............................
Eyelet Strap Guide
Preparation:
• Attach the battery pack.
• Press the SELECT PLAY/REC button to
select recording mode.
For _ mode:
Press the INFO button twice or the INFO
button and then select _.
For _l mode:
Press the INFO button.
DIRECT
RACKUP
0
INFO
[] To return to the normal screen
Press the INFO button again.
• If "COMMUNICATING ERROR" appears,
there may be a problem with your battery.
In such a case, consult your nearest JVC
dealer.
• The recordable time display should only be
used as a guide. It is displayed in 10 minute
units.
A battery is included inside the remote control at
the time of purchase.
Remove the insulation sheet before use.
i Beam Effective Area
Remote Sensor _
Effective distance:
5 m (16 ft)
|
The transmitted beam may not be effective or may
cause incorrect operation when the remote sensor
is directly exposed to sunlight or powerful lighting.
To Reinsert the Battery 1
Pull out the battery holder by pressing the lock
tab.
LockTab
15

Recording Files
Preparation: Open the LCD monitor to turn on the camera.
Slide the mode switch to select Press the SELECT PLAY/REC
(video) mode. button to select recording mode.
PLAY/REC
Press the START/STOP button to
start recording.
START i
,,,0P
Approximate remaining time for
recording appears.
[] To stop recording
Press the START/STOP button again.
[] To view the video you just recorded
Select @ during pause.
During the preview, you can delete the
video by selecting 6.
[] To change the picture quality
Change the settings in [VIDEO QUALITY]
from the MENU.
[] To change the aspect ratio of the image
(16:9/4:3)
Change the settings in [SELECT ASPECT
RATIO] from the MENU,
• Video files are given the names MOV001 .MOD to MOV009.MOD, MOV00A.MOD to MOV00EMOD,
and MOV010.MOD in order of recording.
• After recording video for 12 consecutive hours, recording stops automatically.
® A new file will be created for every 4 GB of continuous shooting.
® This camera records video in MPEG2 format compliant with SD-VIDEO format. This camera is not
compatible with other digital video formats.
16

iiiiiiiiiiiiiiiiiiiiiiiiii
Preparation: Open the LCD monitor to turn on the camera.
Slide the mode switch to select Press the SELECT PLAY/REC
(still image) mode. button to select recording mode.
,t_o ,=3
PLAYiREC
Press and hold the SNAPSHOT
button halfway,
The ,_oindicator becomes green when
the captured image is focused.
[] To view the image you just recorded
Select _ after shooting.
During the preview, you can delete the
image by selecting 6.
[] To change the picture quality
Change the settings in [IMAGE
QUALITY] from the MENU.
[] To record still images continuously
Set to [CONTINUOUS SHOOTING] in
[SHUTTER MODE] from the MENU.
[] To change the image size
Change the settings in [IMAGE SIZE]
from the MENU.
Press the SNAPSHOT button fully
to take the photo/picture.
17

Playing Back Files
] Slide the mode switch to select
(video) or _(still image) mode.
2Press the SELECT PLAY/REC button
to select playback mode,
PLAYiREC
The index screen for videos appears.
3Select the desired file,
[] To watch on TV
See page 19.
[] To check the file information
Press the INFO button when playback is
paused.
[] To adjust the sound volume of videos
vo.÷
Turndownthe _ Turnupthe
vonume N_ °, volume
[] Operations during Video Playback [] Operations during Still Image
Playback
0; I_ : Return to the first scene of the file
(2;_,vl : Go to the first scene of the next file
(3; [] : Return to the index screen
(4;_ : Reverse search (during playback)
_11: Frame-by-frame playback in reverse
direction (during pause)*
(5; _ : Playback
|! : Pause
(6;_._.: Forward search (during playback)
I_- : Frame-by-frame playback in forward
direction (during pause)*
* Slow playback starts when you keep
touching the sensor button under 411/I_
for a while.
18,
% .¢" : Return to the first scene of the file
-_ : Change playback order of slide show
in reverse direction
% "_ : Rotate 90 degrees clockwise
_,- : Change playback order of slide show
in forward direction
% [] : Return to the index screen
%H._ : Display the previous file
% _ : Start/end the slide show
(6; _.1 : Display the next file

Watching images on TV
Preparation:
• Set [SWITCH TO ANALOG I/O] to [OUTPUT] from the MENU. (Factory-preset = [OUTPUT])*
eTurn off all units.
• This does not apply to the GZ-MG330 model.
AV Jack
DC Jack
AV Cable
AC Adapter
To AC Outlet AV Input Jack
® You can also connect the cables using the Everio dock connectors. The S-Video cable
(optional) enables even higher playback quality. (_ pg. 9) When other devices such as a DVD
burner are connected to the Everio dock, turn the power of these devices off.*
® This camera is designed to be used with NTSC-type color television signals. It cannot be used
with a television of a different standard.
* GZ-MG330 model does not include the Everio dock.
]Turn on the camera and theTV.
2 Set theTV to its VIDEO mode.
3 (Only when connecting the camera to the VCR/DVD recorder)
Turn on the VCR/DVD recorder, and set it to its AUX input mode.
4 Start playback on the camera. (;,_ pg. 18)
[] if the aspect ratio of the image is not correct as
shown on the right
Change the settings in [SELECT TV TYPE] from
the MENU.
[] To display the camera's on-screen display on
TV
Set [DISPLAY ON TV] to [ON] from the MENU.
t6:9TV 4:3TV
19

Managing Files
Do not remove the recording medium or
perform any other operation (such as turning
off the power) while accessing files. Also,
be sure to use the provided AC adapter, as
the data on the recording medium may be
corrupted if the battery becomes exhausted
during operation. If the data on the recording
medium becomes corrupted, format the
recording medium.
®Protected files cannot be deleted. To delete
them, release the protection first.
• Once files are deleted, they cannot be
restored. Check files before deleting.
Preparation:
•Slide the mode switch to select _ or 0
mode.
®Press the SELECT PLAY/REC button to
select playback mode.
The following screen illustrations are
examples when performing [DELETE].
'1 Touch the MENU button.
You can skip directly to the delete menu by
selecting 6.
2 Select [DELETE] or [PROTECT/
CANCEL].
Deleting/Protecting the Currently
Displayed File
After performing steps 1-2
3 Select [CURRENT].
4 When [DELETE?] or [PROTECT?]
appears, select [YES].
You can select the previous or next file by
selecting _ or"_.
Deleting/Protecting Files
After performing steps 1-2
Select [FILE SELECT],
Select the desired file.
• The _ (deletion) or o-,, (protection) mark
appears on the file. To select other files,
repeat this step.
®If you slide the zoom lever towards T,
the preview screen is displayed. Sliding
the zoom lever towards W returns to the
index screen.
5 Select [QUIT].
2O