JVC KD-R995BTS User manual

Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
KD-R995BTS / KD-R990BTS / KD-R895BTS / KD-R792BT /
KD-R790BT / KD-RD99BTS / KD-RD79BT / KD-R99MBS
CD RECEIVER
INSTRUCTION MANUAL
JS_JVC_KD_R995BTS_K_C.indd 1JS_JVC_KD_R995BTS_K_C.indd 1 7/6/2017 8:36:57 AM7/6/2017 8:36:57 AM

Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
2ENGLISH
CONTENTS BEFORE USE
IMPORTANT
• To ensure proper use, please read through this manual before using this product. It is especially important that you read and observe
Warning and Caution in this manual.
• Please keep the manual in a safe and accessible place for future reference.
WARNING
• Do not operate any function that takes your attention away from safe driving.
• Do not ingest the battery, Chemical Burn Hazard
The remote control supplied with this product contains a coin/button cell battery.
If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death.
Keep new and used batteries away from children.
If the battery compartment does not close securely, stop using the product and keep it away from children.
If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.
Caution
Volume setting:
• Adjust the volume so that you can hear sounds outside the car to prevent accidents.
• Lower the volume before playing digital sources to avoid damaging the speakers by the sudden increase of the output level.
General:
• Avoid using the external device if it might hinder safe driving.
• Make sure all important data has been backed up. We shall bear no responsibility for any loss of recorded data.
• Never put or leave any metallic objects (such as coins or metal tools) inside the unit to prevent a short circuit.
• If a disc error occurs due to condensation on the laser lens, eject the disc and wait for the moisture to evaporate.
• Depending on the types of cars, the antenna will automatically extend when you turn on the unit with the antenna control wire
connected
( 42) . Turn off the unit when parking at a low ceiling area.
Remote control (RM-RK52):
• Do not leave the remote control in hot places such as on the dashboard.
• The Lithium battery is in danger of explosion if replaced incorrectly. Replace it only with the same or equivalent type.
• The battery pack or batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
BEFORE USE 2
BASICS 3
GETTING STARTED 4
1 Cancel the demonstration
2 Set the clock and date
3 Set the basic settings
RADIO 5
CD/USB/iPod/ANDROID 8
Pandora® 10
iHeartRadio® 11
Spotify 12
SiriusXM® Radio 13
BLUETOOTH® 16
AUX 24
AUDIO SETTINGS 24
DISPLAY SETTINGS 29
LEARNING STEERING
REMOTE CONTROL 31
REFERENCES 32
Maintenance
More information
TROUBLESHOOTING 36
SPECIFICATIONS 39
INSTALLATION/
CONNECTION 40
How to read this manual
• Operations are explained mainly using buttons on the faceplate of KD-R995BTS .
• English indications are used for the purpose of explanation. You can select the display language from the menu.
( 5)
• [XX] indicates the selected items.
•
( XX) indicates references are available on the stated page.
JS_JVC_KD_R995BTS_K_EN_03.indd 2JS_JVC_KD_R995BTS_K_EN_03.indd 2 7/6/2017 8:40:33 AM7/6/2017 8:40:33 AM

Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
3
ENGLISH
BASICS
To On the faceplate On the remote control
Turn on the power Press .
• Press and hold to turn off the power. ( Not available )
Adjust the volume Turn the volume knob. Press or .
• Press and hold to continuously increase the
volume to 15.
Press the volume knob to mute the sound or pause playback.
• Press again to cancel. The volume level returns to the previous
level before muting or pause.
Press to mute the sound or pause playback.
• Press again to cancel. The volume level returns to the
previous level before muting or pause.
Select a source • Press repeatedly.
• Press , then turn the volume knob within 2 seconds.
Press SOURCE repeatedly.
Change the display
information
Press repeatedly.
( 34, 35)
( Not available )
Remote control (RM-RK52) (supplied for KD-R792BT)
Other models can be remotely controlled with an
optionally purchased remote control.
Attach How to resetDetach
Volume knob Loading slot
Detach button
Display window
Faceplate
KD-R995BTS:
USB cable from the rear of the unit
How to replace the battery
Remote sensor (Do not expose to bright sunlight.)
Pull out the
insulation sheet
when using for
the first time.
Reset the unit
within 5 seconds
after detaching the
faceplate.
JS_JVC_KD_R995BTS_K_EN_03.indd 3JS_JVC_KD_R995BTS_K_EN_03.indd 3 7/6/2017 10:48:36 AM7/6/2017 10:48:36 AM

4ENGLISH
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
GETTING STARTED
Cancel the demonstration
When you turn on the power for the first time (or [FACTORY RESET] is set
to
[YES] , 5 ), the display shows: “CANCEL DEMO” “PRESS” “VOLUME
KNOB”
1 Press the volume knob.
[YES] is selected for the initial setup.
2 Press the volume knob again.
“DEMO OFF” appears.
Set the clock and date
1 Press and hold .
2 Turn the volume knob to select [CLOCK] , then press the knob.
To adjust the clock
3 Turn the volume knob to select [CLOCK ADJUST] , then press the knob.
4 Turn the volume knob to make the settings, then press the knob.
Hour Minute
5 Turn the volume knob to select [CLOCK FORMAT] , then press the knob.
6 Turn the volume knob to select [12H] or [24H] , then press the knob.
To set the date
7 Turn the volume knob to select [DATE SET] , then press the knob.
8 Turn the volume knob to make the settings, then press the knob.
Day Month Year
9 Press to exit.
To return to the previous setting item, press .
1
2
Set the basic settings
1 Press and hold .
2 Turn the volume knob to select an item (see the following table),
then press the knob.
3 Repeat step 2until the desired item is selected or activated.
4 Press to exit.
To return to the previous setting item, press .
Default:
XX
SYSTEM
KEY BEEP
(Not applicable when 3-way crossover is selected.)
ON :Activates the keypress tone.; OFF :Deactivates.
SOURCE SELECT
AM SRC
*
ON :Enables AM in source selection.; OFF :Disables. ( 5)
PANDORA SRC
*
ON :Enables PANDORA FRONT/PANDORA REAR/PANDORA in source
selection.;
OFF :Disables. ( 10)
IHEART SRC
*
ON :Enables IHEARTRADIO-F/IHEARTRADIO-R/IHEARTRADIO in source
selection.;
OFF :Disables. ( 11)
SPOTIFY SRC
*
ON :Enables SPOTIFY FRONT/SPOTIFY REAR/SPOTIFY in source
selection.;
OFF :Disables. ( 12)
BUILT-IN AUX
*
ON :Enables AUX in source selection.; OFF :Disables. ( 24)
USER S. REMO
(for KD-R792BT )
See page31 for details.
*
Not displayed when the corresponding source is selected.
3
JS_JVC_KD_R995BTS_K_EN_03.indd 4JS_JVC_KD_R995BTS_K_EN_03.indd 4 7/6/2017 8:40:37 AM7/6/2017 8:40:37 AM

ENGLISH 5
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
F/W UPDATE
UPDATE SYSTEM
F/W UP
xxxx
YES :Starts upgrading the firmware.;
NO :Cancels (upgrading is not activated).
FACTORY
RESET
YES :Resets the settings to default (except the
stored station).;
NO :Cancels.
CLOCK
TIME SYNC ON
:The clock time is automatically set using
the Clock Time (CT) data in FM Radio Broadcast
Data System signal/FM Radio Data System
signal.;
OFF :Cancels.
CLOCK
DISPLAY
ON :The clock time is shown on the
display even when the unit is turned off.;
OFF :Cancels.
ENGLISH Select the display language for menu and
music information if applicable.
By default,
ENGLISH is selected.
ESPANOL
RADIO
“ST” or “STEREO” lights up when receiving an FM stereo broadcast with sufficient signal strength.
Search for a station
1 Press repeatedly to select FM or AM.
2 Press (or press on the remote control) to search for a station automatically.
(or)
Press and hold (or press and hold on the remote control) until “M” flashes,
then press repeatedly to search for a station manually.
Settings in memory
You can store up to 18 stations for FM and 6 stations for AM.
Store a station
While listening to a station....
Press and hold one of the number buttons (1to 6).
(or)
1 Press and hold the volume knob until “PRESETMODE” flashes.
2 Turn the volume knob to select a preset number, then press the knob.
The preset number flashes and “MEMORY” appears.
Select a stored station
Press one of the number buttons (1to6).
(or)
1 Press .
2 Turn the volume knob to select a preset number, then press the knob.
GETTING STARTED
JS_JVC_KD_R995BTS_K_EN_03.indd 5JS_JVC_KD_R995BTS_K_EN_03.indd 5 7/6/2017 8:40:39 AM7/6/2017 8:40:39 AM

6ENGLISH
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
Other settings
1 Press and hold .
2 Turn the volume knob to select an item (see the following table),
then press the knob.
3 Repeat step 2until the desired item is selected/activated or follow
the instructions stated on the selected item.
4 Press to exit.
To return to the previous setting item, press .
Default:
XX
TUNER SETTING (except KD-R792BT)
RADIO TIMER
Turns on the radio at a specific time regardless of the current source.
1 ONCE / DAILY / WEEKLY / OFF :Select how often the timer will be
turned on.
2 FM / AM / SIRIUS XM
*1
:Select the source.
3 01 to 18 (for FM/SIRIUS XM)/ 01 to 06 (for AM):Select the preset
station.
4 Set the activation day
*2
and time.
“
M ” lights up when complete.
Radio Timer will not activate for the following cases.
• The unit is turned off.
•
[OFF] is selected for [AM SRC] in [SOURCE SELECT] after Radio Timer
for AM is selected.
( 4)
SSM SSM 01–06
/ SSM 07–12 / SSM 13–18 :Automatically presets up to 18
stations for FM. “SSM” stops flashing when the first 6 stations are stored.
Select
SSM 07–12 / SSM 13–18 to store the following 12 stations.
RADIO
IF BAND AUTO :Increases the tuner selectivity to reduce interference noises from
adjacent FM stations. (Stereo effect may be lost.);
WIDE :Subjects to
interference noises from adjacent FM stations, but sound quality will not
be degraded and the stereo effect will remain.
MONO SET ON :Improves the FM reception, but the stereo effect will be lost.;
OFF :Cancels.
AREA N.AMERICA : For North/Central/South America, AM/FM intervals:
10kHz/200kHz.;
S.AMERICA :For some South American countries, AM/
FM intervals: 10kHz/50kHz.;
EUROPE :For any other areas, AM/FM
intervals: 9kHz/50kHz.
PTY SEARCH
*3
Select a PTY code (see below).
If there is a station broadcasting a program of the same PTY code as you
have selected, that station is tuned in.
*1
KD-R995BTS/KD-R990BTS/KD-R895BTS/KD-RD99BTS/KD-R99MBS : Selectable only
when SiriusXM Vehicle Tuner is connected.
( 13)
*2
Selectable only when [ONCE] or [WEEKLY] is selected in step 1 .
*3
Only for FM source.
PTY code (except KD-R792BT)
NEWS
, INFORM (information), SPORTS , TALK , ROCK , CLS ROCK (classic rock),
ADLT HIT (adult hits), SOFT RCK (softrock), TOP 40 , COUNTRY , OLDIES , SOFT ,
NOSTALGA (nostalgia), JAZZ , CLASSICL (classical), R & B (rhythm and blues),
SOFT R&B (soft rhythm and blues), LANGUAGE , REL MUSC (religious music),
REL TALK (religious talk), PERSNLTY (personality), PUBLIC , COLLEGE , HABL ESP
(Spanish talk),
MUSC ESP (Spanish music), HIP HOP , WEATHER
JS_JVC_KD_R995BTS_K_EN_03.indd 6JS_JVC_KD_R995BTS_K_EN_03.indd 6 7/6/2017 8:40:39 AM7/6/2017 8:40:39 AM

ENGLISH 7
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
RADIO
Default: XX
TUNER SETTING (for KD-R792BT)
RADIO TIMER
Turns on the radio at a specific time regardless of the current source.
1 ONCE / DAILY / WEEKLY / OFF :Select how often the timer will be turned
on.
2 FM / AM :Select the band.
3 01 to 18 (for FM)/ 01 to 06 (for AM):Select the preset station.
4 Set the activation day
*1
and time.
“
M ” lights up when complete.
Radio Timer will not activate for the following cases.
• The unit is turned off.
•
[OFF] is selected for [AM SRC] in [SOURCE SELECT] after Radio Timer for
AM is selected.
( 4)
SSM SSM 01–06
/ SSM 07–12 / SSM 13–18 : Automatically presets up to 18
stations for FM. “SSM” stops flashing when the first 6 stations are stored.
Select
SSM 07–12 / SSM 13–18 to store the following 12 stations.
IF BAND AUTO :Increases the tuner selectivity to reduce interference noises from
adjacent FM stations. (Stereo effect may be lost.);
WIDE :Subjects to
interference noises from adjacent FM stations, but sound quality will not be
degraded and the stereo effect will remain.
MONO SET ON :Improves the FM reception, but the stereo effect will be lost.;
OFF :Cancels.
NEWS SET
*2
ON :The unit will temporarily switch to News Programme if available.;
OFF :Cancels.
REGIONAL
*2
ON : Switches to another station only in the specific region using the “AF”
control.;
OFF :Cancels.
AF SET
*2
ON : Automatically searches for another station broadcasting the same
program in the same Radio Data System network with better reception
when the current reception is poor.;
OFF : Cancels.
TI ON : Allows the unit to temporarily switch to Traffic Information if available
(“TI” lights up) while listening to all sources except in AM. ;
OFF :Cancels.
AREA N.AMERICA : For North/Central/South America, AM/FM intervals:
10kHz/200kHz.;
S.AMERICA :For some South American countries, AM/FM
intervals: 10kHz/50kHz.;
EUROPE :For any other areas, AM/FM intervals:
9kHz/50kHz.
PTY SEARCH
*2
Select a PTY code (see below).
If there is a station broadcasting a program of the same PTY code as you
have selected, that station is tuned in.
*1
Selectable only when [ONCE] or [WEEKLY] is selected in step 1 .
*2
Only for FM source.
PTY code (for KD-R792BT)
NEWS
, AFFAIRS , INFO , SPORT , EDUCATE , DRAMA , CULTURE , SCIENCE , VARIED , POP
M
(music), ROCK M (music), EASY M (music), LIGHT M (music), CLASSICS , OTHER
M
(music), WEATHER , FINANCE , CHILDREN , SOCIAL , RELIGION , PHONE IN , TRAVEL ,
LEISURE , JAZZ , COUNTRY , NATION M (music), OLDIES , FOLK M (music), DOCUMENT
JS_JVC_KD_R995BTS_K_EN_03.indd 7JS_JVC_KD_R995BTS_K_EN_03.indd 7 7/6/2017 8:40:40 AM7/6/2017 8:40:40 AM

8ENGLISH
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
CD/USB/iPod/ANDROID
Selectable source:
•
KD-R995BTS : CD/USBFRONT/USBREAR/iPodFRONT/iPodREAR/ANDROIDFRONT/ANDROIDREAR
• KD-R990BTS / KD-R895BTS / KD-R792BT / KD-R790BT / KD-RD99BTS / KD-RD79BT/KD-R99MBS : CD/USB/
iPodUSB/ANDROID
To On the faceplate On the remote control
Reverse/Fast-forward*3Press and hold . Press and hold .
Select a track/file Press .Press .
Select a folder*4Press . Press .
Repeat play*5Press repeatedly.
TRACK REPEAT / ALL REPEAT : Audio CD
TRACK REPEAT / FOLDER REPEAT / ALL REPEAT : MP3/WMA/AAC/WAV/
FLAC file
ONE REPEAT / ALL REPEAT / REPEAT OFF : iPod or ANDROID
Random play*5Press repeatedly.
ALL RANDOM / RANDOM OFF : Audio CD
FOLDER RANDOM / ALL RANDOM / RANDOM OFF : MP3/WMA/AAC/WAV/
FLAC file
SONG RANDOM / ALL RANDOM / RANDOM OFF : iPod or ANDROID
*1
Do not leave the cable inside the car when not using.
*2
When connecting an Android device, “Press [VIEW] to install JVC MUSIC PLAY APP” is shown. Follow the instructions
to install the application. You can also install the latest version of JVC MUSIC PLAY application on your Android device
before connecting.
*3
For ANDROID: Applicable only when [AUTO MODE] is selected. ( 9)
*4
For CD: Only for MP3/WMA/AAC files. This does not work for iPod/ANDROID.
*5
For iPod/ANDROID: Applicable only when [HEAD MODE] / [AUTO MODE] is selected. ( 9)
Start playback
The source changes automatically and playback
starts.
CD
Eject disc Label side
USB input terminal
USB 2.0 cable
*1
(commercially available)
USB cable
*1
(commercially available)
Accessory of the iPod/
iPhone
*1
USB
iPod/iPhone
ANDROID*2
KD-R995BTS :
You can also connect to
the USB cable from the
rear of the unit.
JS_JVC_KD_R995BTS_K_EN_03.indd 8JS_JVC_KD_R995BTS_K_EN_03.indd 8 7/6/2017 8:40:40 AM7/6/2017 8:40:40 AM

ENGLISH 9
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
Select control mode
While in iPodFRONT/iPodREAR/iPodUSB source, press
repeatedly.
HEAD MODE : Control iPod from this unit.
IPHONE MODE : Control iPod using the iPod itself. However, you can still
play/pause or file skip from this unit.
While in ANDROIDFRONT/ANDROIDREAR/ANDROID source, press
repeatedly.
AUTO MODE : Control Android device from this unit via JVC MUSIC PLAY
application installed in the Android device.
AUDIO MODE : Control Android device using the Android device itself via
other media player applications installed in the Android
device. However, you can still play/pause or file skip from
this unit.
Select music drive
While in USBFRONT/USBREAR/USB source, press repeatedly.
Stored songs in the following drive will be played back.
• Selected internal or external memory of a smartphone (Mass Storage
Class).
• Selected drive of a multiple drives device.
Settings to use JVC Remote application
JVC Remote application is designed to control the JVC car receiver’s
operations from the iPhone/iPod (via USB input terminal).
Preparation:
Install the latest version of JVC Remote application on your device before
connecting.
You can make the settings in the same way as connection via Bluetooth.
( 22)
Select a file from a folder/list
For iPod/ANDROID, applicable only when [HEAD MODE] / [AUTO MODE] is
selected.
1 Press .
2 Turn the volume knob to select a folder/list, then press the knob.
3 Turn the volume knob to select a file, then press the knob.
Quick search (applicable only for CD, USB FRONT, USB REAR, USB, ANDROID
FRONT, ANDROID REAR and ANDROID source)
If you have many files, you can search through them quickly.
Turn the volume knob quickly to browse through the list quickly.
Alphabet search (applicable only for iPod FRONT, iPod REAR, iPod USB,
ANDROID FRONT, ANDROID REAR and ANDROID source)
You can search for a file according to the first character.
For iPodFRONT/iPodREAR/iPodUSB source
Press or turn the volume knob quickly to select the
desired character (A to Z, 0to9, OTHERS).
• Select “OTHERS” if the first character is other than AtoZ, 0to9.
For ANDROIDFRONT/ANDROIDREAR/ANDROID source
1Press to enter character search.
2Turn the volume knob to select the desired character.
^A^: Upper case letters (A to Z)
_A_: Lower case letters (a to z)
-0-: Numbers (0 to 9)
-OTHERS-: Character other than AtoZ, 0to9
3Press the volume knob to start searching.
• To return to the previous setting item, press .
• To cancel, press and hold .
CD/USB/iPod/ANDROID
JS_JVC_KD_R995BTS_K_EN_03.indd 9JS_JVC_KD_R995BTS_K_EN_03.indd 9 7/6/2017 8:40:41 AM7/6/2017 8:40:41 AM

10 ENGLISH
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
Pandora® (except KD-R792BT)
Preparation:
Install the latest version of the Pandora application on your device
(iPhone/iPod touch), then create an account and log in to Pandora.
• Select
[ON] for [PANDORA SRC] in [SOURCE SELECT] . ( 4)
Start listening
1 Open the Pandora application on your device.
2 Connect your device to the USB input terminal.
3 Press repeatedly to select PANDORA FRONT/PANDORA
REAR/PANDORA.
Broadcast starts automatically.
To On the faceplate On the remote control
Playback/pause Press the volume knob. Press .
Skip a track Press T. Press I.
Thumbs up or
thumbs down*2
Press . Press .
*1
Do not leave the cable inside the car when not using.
*2
If thumbs down is selected, the current track is skipped.
Create and store a new station
1 Press .
2 Turn the volume knob to select [NEW STATION] , then press the knob.
3 Turn the volume knob to select [FROM TRACK] or [FROM ARTIST] , then
press the knob.
A new station is created based on the current song or artist.
4 Press and hold one of the number buttons (3, 4, 5or 6) to store.
To select a stored station: Press one of the number buttons (3, 4, 5or 6).
Search for a registered station
1 Press .
2 Turn the volume knob to select an item, then press the knob.
[BY DATE] : According to the registered date
[A-Z] : By alphabetical order
3 Turn the volume knob to select the desired station, then press the
knob.
To cancel, press and hold .
Bookmark current song information
Press and hold the volume knob.
“BOOKMARKED” appears and the information is stored to your device.
• The bookmark is available on your Pandora account but not on this
unit.
USB input terminal
and/or
Accessory of the iPod/iPhone*
1
KD-R995BTS : You can also connect to
the USB cable from the rear of the unit.
JS_JVC_KD_R995BTS_K_EN_03.indd 10JS_JVC_KD_R995BTS_K_EN_03.indd 10 7/6/2017 8:40:42 AM7/6/2017 8:40:42 AM

ENGLISH 11
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
iHeartRadio® (except KD-R792BT)
Preparation:
Install the latest version of iHeartAuto application on your device
(iPhone/iPod touch), then create an account and log in to iHeartRadio.
• Select
[ON] for [IHEART SRC] in [SOURCE SELECT] . ( 4)
Start listening
1 Open the iHeartAuto application on your device.
2 Connect your device to the USB input terminal.
3 Press repeatedly to select IHEARTRADIO-F/IHEARTRADIO-R/
IHEARTRADIO.
Broadcast starts automatically
* Do not leave the cable inside the car when not using.
To On the faceplate On the remote control
Playback/pause Press the volume knob. Press .
Skip a track for
custom station
Press T. Press I.
Thumbs up or
thumbs down
Press . Press .
Create a new/
custom station
Press and hold the
volume knob. ( Not available )
Scan for live station 1 Press 3to start
scanning.
2 Press 3again to listen
to the station.
( Not available )
Search and store a station
1 Press .
2 Turn the volume knob to select a category, then press the knob.
3 Turn the volume knob to select the desired station, then press the
knob.
When a city list appears, you can search cities in alphabetical order by
turning the volume knob quickly.
To cancel, press and hold .
To store a station: Press and hold one of the number buttons (4, 5or 6).
To select a stored station: Press one of the number buttons (4, 5or 6).
USB input terminal
Accessory of the iPod/iPhone*
KD-R995BTS : You can also connect to
the USB cable from the rear of the unit.
and/or
JS_JVC_KD_R995BTS_K_EN_03.indd 11JS_JVC_KD_R995BTS_K_EN_03.indd 11 7/6/2017 8:40:43 AM7/6/2017 8:40:43 AM

12 ENGLISH
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
Spotify
Preparation:
Install the latest version of the Spotify application on your device (iPhone/
iPod touch), then create an account and log in to Spotify.
• Select
[ON] for [SPOTIFY SRC] in [SOURCE SELECT] . ( 4)
Start listening
1 Open the Spotify application on your device.
2 Connect your device to the USB input terminal.
3 Press repeatedly to select SPOTIFYFRONT/SPOTIFYREAR/
SPOTIFY.
Broadcast starts automatically
* Do not leave the cable inside the car when not using.
To On the faceplate On the remote control
Playback/pause Press the volume knob. Press .
Skip a track Press S*1 / T. Press H*1/ I.
Thumbs up or
thumbs down
*2
Press . Press .
Start radio Press and hold 5.( Not available )
To On the faceplate On the remote control
Repeat play
*3Press repeatedly.
ALL REPEAT , ONE REPEAT
*1
,
REPEAT OFF
( Not available )
Random play
*3Press repeatedly
*1.
ALL RANDOM , RANDOM OFF
( Not available )
*1
Available for premium account users only.
*2
This feature is available for tracks in Radio only. If thumbs down is selected, the current
track is skipped.
*3
Available for tracks in Playlists only.
Save favorite song information
While listening to the Radio on Spotify...
Press and hold the volume knob.
“SAVED” appears and the information is stored to “Your Music” or “Your
Library” on your Spotify account.
To unsave, repeat the same procedure.
“REMOVED” appears and the information is removed from “Your Music”
or “Your Library” on your Spotify account.
Search for a song or station
1 Press .
2 Turn the volume knob to select a list type, then press the knob.
The list types displayed differ depending on the information sent
from Spotify.
3 Turn the volume knob to select the desired song or station, then
press the knob.
You can browse through the list quickly by turning the volume knob
quickly.
To cancel, press and hold .
USB input terminal
Accessory of the iPod/iPhone*
KD-R995BTS : You can also connect to
the USB cable from the rear of the unit.
and/or
JS_JVC_KD_R995BTS_K_EN_03.indd 12JS_JVC_KD_R995BTS_K_EN_03.indd 12 7/6/2017 8:40:44 AM7/6/2017 8:40:44 AM

ENGLISH 13
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
SiriusXM® Radio (for KD-R995BTS/KD-R990BTS/KD-R895BTS/KD-RD99BTS/KD-R99MBS)
Start listening
1 Press repeatedly to select SIRIUSXM.
2 Press .
“ ” lights up.
3 Turn the volume knob to select a CATEGORY, then press the knob.
4 Turn the volume knob to select a category from the list, then press the knob.
If “ALL CHANNEL” is selected, all the available channels will be shown.
5 Turn the volume knob to select a channel, then press the knob.
(or)
Press to search for a channel manually.
• Pressing and holding changes the channel rapidly.
If a locked channel or a mature channel is selected, a pass code input screen appears.
Enter the pass code to receive the channel.
( 15)
Settings in memory
You can store up to 18 channels.
Store a channel
While listening to a channel....
Press and hold one of the number buttons (1to 6).
(or)
1 Press and hold the volume knob until “PRESETMODE” flashes.
2 Turn the volume knob to select a preset number, then press the knob.
The preset number flashes and “MEMORY” appears.
Select a stored channel
Press one of the number buttons (1to6).
(or)
1 Press .
2 Turn the volume knob to select PRESET, then press the knob.
3 Turn the volume knob to select a preset number, then press the knob.
(or)
Press on the remote control.
Only SiriusXM® brings you more of what you love
to listen to, all in one place. Get over 140 channels,
including commercial-free music plus the best sports,
news, talk, comedy and entertainment. Welcome to the
world of satellite radio. A SiriusXM Vehicle Tuner and
Subscription are required.
Preparation:
1 Connect the optional SiriusXM Vehicle Tuner
(commercially available).
2 Check your Radio ID for activation.
The SiriusXM Radio ID is required for activation and
can be found by tuning to Channel 0 as well as on
the label found on the SiriusXM Vehicle Tuner and
its packaging.
The Radio ID does not include the letters I, O, S or F.
3Press repeatedly to select SIRIUSXM to
start updating.
Antenna
Expansion port on
the rear panel
SiriusXM Vehicle Tuner
JS_JVC_KD_R995BTS_K_EN_03.indd 13JS_JVC_KD_R995BTS_K_EN_03.indd 13 7/6/2017 8:40:45 AM7/6/2017 8:40:45 AM

14 ENGLISH
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
Using SiriusXM tuner models later than SXV200: This unit can
assign a maximum of 18 SmartFavorites channels. Initially, all preset
channels are assigned as SmartFavorites.
• “
*” appears at the last character of the channel name for the
SmartFavorites channels.
When you select a SmartFavorite channel, you can rewind and replay
up to 30 minutes of any of the missed news, talk, sports or music
content.
• Playback starts from the beginning of the song if
[TUNE START] is set
to
[ON] ( 15) for most music channels stored as a SmartFavorite.
To On the faceplate
Select a stored
SmartFavorite
channel
Press one of the number buttons (1to6).
1 Press .
2 Turn the volume knob to select PRESET, then
press the knob.
3 Turn the volume knob to select a preset
number, then press the knob.
Cancel
SmartFavorites
channels
1 Press .
2 Turn the volume knob to select PRESET, then
press the knob.
3 Turn the volume knob to select a preset
number, then press and hold the knob.
“
*” is removed from the last character.
Reassign
SmartFavorites
channels
Repeat steps 1to 3of cancelling SmartFavorites
channels.
“
*” appears at the last character.
SiriusXM Replay™
While listening to a channel....
1 Press the volume knob.
“ ” lights up and the unit memorizes this paused position.
2 Press the volume knob to start Replay.
Replay starts from the paused position in step 1.
During Replay...
To On the faceplate On the remote control
Playback/pause Press the volume knob. Press .
Skip backward/
forward
Press .Press .
Rewind/Fast-forward Press and hold .Press and hold .
Go to Live and exit
Replay
Press and hold the
volume knob. Press and hold .
1 Press .
2 Turn the volume knob
to select LIVE, then
press the knob.
SmartFavorites and TuneStart™
User preset channels are initially assigned as the SmartFavorites channels.
SmartFavorite channel is available with SXV200 or later SiriusXM tuner
models. The SiriusXM Vehicle Tuner automatically buffers the broadcast
audio content of the SmartFavorites channels in the background.
Using SXV200: This unit can assign a maximum of 6 SmartFavorites channels.
If you try to assign the 7th channel, an error beep tone will be heard. Initially,
preset channels 1 to 6 are assigned as SmartFavorites.
SiriusXM® Radio (for KD-R995BTS/KD-R990BTS/KD-R895BTS/KD-RD99BTS/KD-R99MBS)
JS_JVC_KD_R995BTS_K_EN_03.indd 14JS_JVC_KD_R995BTS_K_EN_03.indd 14 7/18/2017 1:55:17 PM7/18/2017 1:55:17 PM

ENGLISH 15
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
TuneScan™
You can get a short preview of the songs that you have missed on each of
your SmartFavorites music channels or currently tuned music channel.
1 Press .
2 Turn the volume knob to select TUNE SCAN, then press the knob.
Scanning start for the first 6 seconds of the recorded music contents.
• To listen to the current song, press the volume knob to stop scanning.
The unit continues playing the current song.
• To select the previous/next song, press .
• To cancel scanning, press and hold the volume knob. Playback returns
to the channel before you entered TuneScan.
SiriusXM settings
1 Press and hold .
2 Turn the volume knob to select an item (see the following table),
then press the knob.
3 Repeat step 2until the desired item is selected/activated or follow
the instructions stated on the selected item.
4 Press to exit.
To return to the previous setting item, press .
Default:
XX
SIRIUS XM
CHANNEL LOCK
To unlock settings:
1 Turn the volume knob to select a number.
2 Press to move to the entry position.
3 Repeat steps 1 and 2 to enter the current pass code.
(Initial pass code is 0000.)
4 Press the volume knob to confirm.
CODE SET 1 Press the volume knob to enter [NEW CODE] .
2 Turn the volume knob to select a number.
3 Press to move to the entry position.
4 Repeat steps 2 and 3 to enter a new 4-digit pass code.
5 Press the volume knob to confirm.
6 Repeat steps 2 to 5 to reconfirm the pass code.
• Make a note of the new pass code to enter channel lock settings
for next time.
LOCK SETTING MATURE CH :Selects the SiriusXM-defined lock setting.;
USER DEFINED :Selects the individual channels the user wants to
lock.;
OFF :Cancels.
CHANNEL EDIT
*11
Turn the volume knob to select a category, then press the knob.
2 Turn the volume knob to select a channel you want to lock, then
press the knob.
“L” appears in front of the channel number.
3 Press and hold to exit.
CHANNEL CLEAR
*1
YES :Clears all the locked channels.; NO :Cancels.
TUNE START
*2
ON :All qualified music channels in the SmartFavorites will start
playback from the beginning of the song.;
OFF :Cancels.
SIGNAL LEVEL Shows the strength ( NO SIGNAL / WEAK / GOOD / STRONG ) of the
current received signal.
BUFFER USAGE Shows the memory usage ( 0% to 100% ) for Replay buffer.
SXM RESET YES :Resets stored channel and lock setting to default.; NO :Cancels.
*1
Displayed only when [USER DEFINED] is selected.
*2
Available only if the connected SiriusXM Vehicle Tuner is SXV200 or later that supports
SmartFavorites.
SiriusXM® Radio (for KD-R995BTS/KD-R990BTS/KD-R895BTS/KD-RD99BTS/KD-R99MBS)
JS_JVC_KD_R995BTS_K_EN_03.indd 15JS_JVC_KD_R995BTS_K_EN_03.indd 15 7/6/2017 8:40:47 AM7/6/2017 8:40:47 AM

16 ENGLISH
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
Pair and connect a Bluetooth device for the first time
1 Press to turn on the unit.
2 Search and select “KD-R9 BTS”/“KD-R8 BTS”/“KD-R7 BT”/“KD-RD9 BTS”/
“KD-RD7 BT”/“KD-R9 MBS” on the Bluetooth device.
“BTPAIRING” flashes on the display.
• For some Bluetooth devices, you may need to enter the Personal Identification Number
(PIN) code immediately after searching.
3 Perform (A) or (B) depending on what appears on the display.
For some Bluetooth devices, pairing sequence may vary from the steps described below.
(A) “[Device Name]” “XXXXXX” “VOL–YES” “BACK–NO”
“XXXXXX” is a 6-digit passkey randomly generated during each pairing.
Ensure that the passkeys appear on the unit and Bluetooth device are the same.
Press the volume knob to confirm the passkey.
Operate the Bluetooth device to confirm the passkey.
(B) “[Device Name]” “VOL–YES” “BACK–NO”
Press the volume knob to start pairing.
• If “PAIRING” “PIN 0000” scrolls on the display, enter the PIN code “0000” into the
Bluetooth device.
You can change to a desired PIN code before pairing.
( 20)
• If only “PAIRING” appears, operate the Bluetooth device to confirm pairing.
“PAIRING COMPLETED” appears when pairing is completed and “ ” will light up when the
Bluetooth connection is established.
• This unit supports Secure Simple Pairing (SSP).
• Up to five devices can be registered (paired) in total.
• Once the pairing is completed, the Bluetooth device will remain registered in the unit even if
you reset the unit. To delete the paired device,
20 , [DEVICE DELETE] .
• A maximum of two Bluetooth phones and one Bluetooth audio device can be connected at
any time.
However, while in BT AUDIO source, you can connect to five Bluetooth audio devices and
switch between these five devices. (
21 )
• Some Bluetooth devices may not automatically connect to the unit after pairing. Connect the
device to the unit manually.
• Refer to the instruction manual of the Bluetooth device for more information.
BLUETOOTH®
BLUETOOTH — Connection
Supported Bluetooth profiles
– Hands-Free Profile (HFP)
– Advanced Audio Distribution Profile (A2DP)
– Audio/Video Remote Control Profile (AVRCP)
– Serial Port Profile (SPP)
– Phonebook Access Profile (PBAP)
Supported Bluetooth codecs
– Sub Band Codec (SBC)
– Advanced Audio Coding (AAC)
Connect the microphone
* For the location of the microphone input terminal/microphone
input jack, refer to page“Connecting external amplifiers” on
page43.
Adjust the microphone
angle Secure using cord clamps
(not supplied) if necessary.
MIC (microphone input terminal)*
Microphone (supplied)
Rear panel
JS_JVC_KD_R995BTS_K_EN_03.indd 16JS_JVC_KD_R995BTS_K_EN_03.indd 16 7/6/2017 8:40:47 AM7/6/2017 8:40:47 AM

ENGLISH 17
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
Auto Pairing
When you connect iPhone/iPod touch/
Android device to the USB input terminal,
pairing request (via Bluetooth) is automatically
activated.
Press the volume knob to pair once you have
confirmed the device name.
Automatic pairing request is activated only if:
– Bluetooth function of the connected device is
turned on.
–
[AUTO PAIRING] is set to [ON] . ( 20)
– JVC MUSIC PLAY application is installed on
the Android device
( 8) and [AUTO MODE] is
selected
( 9) .
BLUETOOTH — Mobile phone
Receive a call
When there is an incoming call:
•
KD-R995BTS / KD-R990BTS / KD-R895BTS / KD-RD99BTS / KD-R99MBS :
The buttons will blink in the color you have selected in
[RING COLOR] . ( 18)
KD-R792BT / KD-R790BT / KD-RD79BT :
The buttons will blink in the blinking pattern you have selected in
[RING ILLUMI] . ( 18)
• The unit answers the call automatically if [AUTO ANSWER] is set to a selected time. ( 18)
During a call:
•
KD-R995BTS / KD-R990BTS / KD-R895BTS / KD-RD99BTS / KD-R99MBS :
The buttons stop blinking and illuminate in the color you have selected in
[RING COLOR] . ( 18)
KD-R792BT / KD-R790BT / KD-RD79BT :
The buttons stop blinking.
• If you turn off the unit or detach the faceplate, the Bluetooth connection is disconnected.
The following operations may differ or not available depending on the connected phone.
To On the faceplate On the remote control
First incoming call...
Answer a call Press or the volume knob. Press .
Reject a call Press and hold or the
volume knob.
Press and hold .
End a call Press and hold or the
volume knob.
Press and hold .
BLUETOOTH®
JS_JVC_KD_R995BTS_K_EN_03.indd 17JS_JVC_KD_R995BTS_K_EN_03.indd 17 7/6/2017 8:40:49 AM7/6/2017 8:40:49 AM

18 ENGLISH
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
To On the faceplate On the remote control
While talking on the first incoming call...
Answer another incoming
call and hold the current
call
Press or the
volume knob. ( Not available )
Reject another incoming
call
Press and hold
or the volume knob. ( Not available )
While having two active calls...
End current call and
activate held call
Press and hold
or the volume knob.
Press and hold
.
Swap between the
current call and held call
Press .( Not available )
Adjust the phone volume*1
[00] to [35] (Default: [15] )
Turn the volume knob
during a call.
Press
*2or
during a call.
Switch between hands-free
and private talk modes*3Press during
a call. ( Not available )
*1
This adjustment will not affect the volume of the other sources.
*2
Press and hold to continuously increase the volume to 15.
*3
Operations may vary according to the connected Bluetooth device.
Improve the voice quality
While talking on the phone....
1 Press and hold .
2 Turn the volume knob to select an item ( see the following table ) , then
press the knob.
3 Repeat step 2until the desired item is selected or activated.
4 Press to exit.
To return to the previous setting item, press .
Default: XX
MIC GAIN LEVEL –10 to LEVEL +10 ( LEVEL –04 ):The sensitivity of the
microphone increases as the number increased.
NR LEVEL LEVEL –05 to LEVEL +05 ( LEVEL 00 ):Adjust the noise
reduction level until the least noise is being heard during a phone
conversation.
ECHO CANCEL LEVEL –05 to LEVEL +05 ( LEVEL 00 ):Adjust the echo
cancellation delay time until the least echo is being heard during a
phone conversation.
Make the settings for receiving a call
1 Press to enter Bluetooth mode.
2 Turn the volume knob to select an item (see the following
table), then press the knob.
3 Repeat step 2until the desired item is selected or activated.
To return to the previous setting item, press .
Default:
XX
SETTINGS
AUTO ANSWER 01 SEC
to 30 SEC :The unit answers incoming call automatically in
the selected time (in seconds).;
OFF :Cancels.
RING COLOR KD-R995BTS / KD-R990BTS / KD-R895BTS / KD-RD99BTS /
KD-R99MBS :
COLOR 01 to COLOR 49 ( COLOR 08 ): Selects the light color for the
buttons as notification when there is an incoming call and during
a call.;
OFF :Cancels.
RING ILLUMI KD-R792BT / KD-R790BT / KD-RD79BT :
BLINK 01 to BLINK 05 ( BLINK 02 ): Selects the blinking pattern
for the buttons as notification when there is an incoming call.;
OFF :Cancels.
BLUETOOTH®
JS_JVC_KD_R995BTS_K_EN_03.indd 18JS_JVC_KD_R995BTS_K_EN_03.indd 18 7/6/2017 8:40:51 AM7/6/2017 8:40:51 AM

ENGLISH 19
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
BATT/SIGNAL
*
KD-R995BTS / KD-R990BTS / KD-R895BTS / KD-RD99BTS / KD-R99MBS :
AUTO :Shows the strength of the battery and signal when the unit detects a
Bluetooth device and the Bluetooth device is connected.;
OFF :Cancels.
*
Functionality depends on the type of the phone used.
Make a call
You can make a call from the call history, phonebook, or dialing the number.
Call by voice is also possible if your mobile phone has the feature.
1 Press to enter Bluetooth mode.
“(First device name)” appears.
• If two Bluetooth phones are connected, press again to switch to
another phone.
“(Second device name)” appears.
2 Turn the volume knob to select an item (see the following table), then
press the knob.
3 Repeat step 2until the desired item is selected/activated or follow the
instructions stated on the selected item.
To return to the previous setting item, press .
RECENT CALL (Applicable only if the phone supports PBAP.)
1 Press the volume knob to select a name or a phone number.
• “<” indicates call received, “>“ indicates call made, “M” indicates call
missed.
• “NO HISTORY” appears if there is no recorded call history or call number.
2 Press the volume knob to call.
PHONEBOOK (Applicable only if the phone supports PBAP.)
1 Press to select the desired letter (A to Z, 0to9, and OTHERS).
• “OTHERS” appears if the first character is other than Ato Z, 0 to 9.
2 Turn the volume knob to select a name, then press the knob.
3 Turn the volume knob to select a phone number, then press the knob to call.
• The phonebook of the connected phone is automatically transferred to the unit
when pairing.
• This unit can display only non-accent letters. (Accent letters such as “Ú” is
showns as “U”.)
BLUETOOTH®
DIAL NUMBER 1 Turn the volume knob to select a number (0 to 9) or character
(, #, +).
2 Press to move the entry position.
Repeat steps
1 and 2 until you finish entering the phone number.
3 Press the volume knob to call.
VOICE Speak the name of the contact you want to call or the voice command
to control the phone functions.
( Make a call using voice
recognition)
Make a call using voice recognition
1 Press and hold to activate the connected phone.
2 Speak the name of the contact you want to call or the voice
command to control the phone functions.
• Supported Voice Recognition features vary for each phone. Refer
to the instruction manual of the connected phone for details.
• This unit also supports the intelligent personal assistant function of
iPhone.
Settings in memory
Store a contact in memory
You can store up to 6 contacts into the number buttons (1to 6).
1 Press to enter Bluetooth mode.
2 Turn the volume knob to select [RECENT CALL] , [PHONEBOOK] or
[DIAL NUMBER] , then press the knob.
3 Turn the volume knob to select a contact or enter a phone
number.
If a contact is selected, press the volume knob to show the phone
number.
4 Press and hold one of the number buttons (1to 6).
“MEMORY P(selected preset number)” appears when the contact
is stored.
To erase a contact from the preset memory, select
[DIAL NUMBER] in
step 2and store a blank number.
JS_JVC_KD_R995BTS_K_EN_03.indd 19JS_JVC_KD_R995BTS_K_EN_03.indd 19 7/6/2017 8:40:52 AM7/6/2017 8:40:52 AM

20 ENGLISH
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
Make a call from memory
1 Press to enter Bluetooth mode.
2 Press one of the number buttons (1to 6).
3 Press the volume knob to call.
“NO PRESET” appears if there is no contact stored.
Bluetooth mode settings
1 Press and hold .
2 Turn the volume knob to select an item ( see the following table ) , then press the
knob.
3 Repeat step 2until the desired item is selected/activated or follow the instructions
stated on the selected item.
4 Press to exit.
To return to the previous setting item, press .
Default:
XX
BT MODE
PHONE SELECT
*Selects the phone or audio device to connect or disconnect.
“” appears in front of the device name when connected.
“” appears in front of the current playback audio device.
AUDIO SELECT *
DEVICE DELETE 1 Turn the volume knob to select a device to delete, then press the knob.
2 Turn the volume knob to select [YES] or [NO] , then press the knob.
PIN CODE EDIT
(0000)
Changes the PIN code (up to 6 digits).
1 Turn the volume knob to select a number.
2 Press to move the entry position.
Repeat steps
1 and 2 until you finish entering the PIN code.
3 Press the volume knob to confirm.
RECONNECT ON :The unit automatically reconnect when the last connected Bluetooth device is within
range.;
OFF :Cancels.
AUTO PAIRING ON :The unit automatically pair supported Bluetooth device (iPhone/iPod touch/Android
device) when it is connected through USB input terminal.Depending on the operating system
of the connected device, this function may not work. ;
OFF :Cancels.
BLUETOOTH®
INITIALIZE YES :Initializes all the Bluetooth settings (including
stored pairing, phonebook, and etc.).;
NO :Cancels.
INFORMATION MY  BT  NAME : Displays the unit name
(“KD-R9 BTS”/“KD-R8 BTS”/“KD-R7 BT”/
“KD-RD9 BTS”/“KD-RD7 BT”/“KD-R9 MBS“).;
MY  ADDRESS : Shows address of this unit.
*
You can only connect a maximum of two Bluetooth phones and one
Bluetooth audio device at any time.
Bluetooth compatibility check mode
You can check the connectivity of the supported profile
between the Bluetooth device and the unit.
• Make sure there is no Bluetooth device paired.
1 Press and hold .
“BLUETOOTH” “CHECK MODE” appears. “SEARCH
NOW USING PHONE” “PIN IS 0000” scrolls on the
display.
2 Search and select “KD-R9 BTS”/“KD-R8 BTS”/
“KD-R7 BT”/“KD-RD9 BTS”/“KD-RD7 BT”/
“KD-R9 MBS“ on the Bluetooth device within
3minutes.
3 Perform (A), (B) or (C) depending on what appears
on the display.
(A) “PAIRING” “XXXXXX” (6-digit passkey): Ensure
that the same passkey appears on the unit and
Bluetooth device, then operate the Bluetooth
device to confirm the passkey.
(B) “PAIRING” “PIN IS 0000”: Enter “0000” on the
Bluetooth device.
(C) “PAIRING”: Operate the Bluetooth device to
confirm pairing.
JS_JVC_KD_R995BTS_K_EN_03.indd 20JS_JVC_KD_R995BTS_K_EN_03.indd 20 7/6/2017 8:40:53 AM7/6/2017 8:40:53 AM