JVC KD-SV3205 User manual

ENGLISH
INDONESIA
VCD/CD RECEIVER KD-SV3205
ALAT PENERIMA VCD/CD KD-SV3205
For canceling the display demonstration, see page 7.
Untuk membatalkan tampilan demonstrasi, lihat halaman 7.
For installation and connections, refer to the separate manual.
Untuk instalasi dan penyambungan, lihat buku pedoman terpisah.
INSTRUCTIONS
BUKU PETUNJUK
GET0347-004A
[UN]
VIDEO CD
PBCENTER
SOURCE EQ
BAND
VOL.
DOWN
UP
ATT
OSD
AUDIO
123
456
78
0
9
RETURN
REV FWD
Cover_KD-SV3205[UN]_3.indd 2Cover_KD-SV3205[UN]_3.indd 2 1/18/06 10:07:04 AM1/18/06 10:07:04 AM

2
ENGLISH
Thank you for purchasing a JVC product.
Please read all instructions carefully before operation, to ensure your complete understanding and to
obtain the best possible performance from the unit.
IMPORTANT FOR LASER PRODUCTS
1. CLA 1 LA ER PRODUCT
2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave
all servicing to qualified service personnel.
3. CAUTION: Visible and invisible laser radiation when open and interlock failed or defeated.
Avoid direct exposure to beam.
4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUT IDE THE UNIT.
How to reset your unit
• Your preset adjustments will also be erased.
How to use the M MODE button
If you press M MODE, the unit goes into
functions mode, then the number buttons and
4 /¢ buttons work as different
function buttons.
Ex.: When number button 2 works as
MO (monaural) button.
To use these buttons for their original
functions again after pressing M MODE, wait
for 5 seconds without pressing any of these
buttons until the functions mode is cleared or
press M MODE again.
Time countdown indicator
WARNINGS
To prevent accidents and damage
• DO NOT install any unit in locations where;
– it may obstruct the steering wheel and
gearshift lever operations.
– it may obstruct the operation of safety devices
such as air bags.
– it may obstruct visibility.
• DO NOT operate the unit while driving.
• If you need to operate the unit while driving, be
sure to look ahead carefully.
• The driver must not watch the monitor while
driving.
If the parking brake is not engaged, “PARKING”
flashes on the display, and no playback picture
will be shown on the monitor.
– This warning appears only when the parking
brake wire is connected to the parking brake
system built in the car (refer to the Installation/
Connection Manual).
How to forcibly eject a disc
• If this does not work, reset your unit.
• Be careful not to drop the disc when it ejects.
EN02-07_KD-SV3205[UN]_3.indd 2EN02-07_KD-SV3205[UN]_3.indd 2 1/18/06 9:45:29 AM1/18/06 9:45:29 AM

ENGLISH
3
How to read this manual
• Button operations are mainly explained with
the illustrations in the table below.
• ome related tips and notes are explained in
“More about this unit” (see pages 20 – 22).
Press briefly.
Press repeatedly.
Press either
one.
Press and hold until your
desired response begins.
Press and hold both
buttons at the same time.
The following marks are used to indicate...
: Built-in VCD/CD player
operations.
: External CD changer operations.
: Indicator displayed for the
corresponding operation.
How to detach/attach the control
panel
Detaching...
Attaching...
CONTENTS
Control panel ................................... 4
Remote controller — RM-RK120 ............. 5
Getting started ................................. 7
Basic operations .................................................... 7
Radio operations .............................. 8
Disc operations ................................. 9
Playing a disc in the unit ...................................... 9
Playing discs in the CD changer ............................ 9
Sound adjustments ........................... 14
General settings — PSM ................... 15
iPod®/D. player operations ................ 17
Other external component operations ... 19
Maintenance .................................... 19
More about this unit ......................... 20
Troubleshooting ............................... 23
Specifications ................................... 25
For safety...
• Do not raise the volume level too much, as
this will block outside sounds, making driving
dangerous.
• top the car before performing any
complicated operations.
Temperature inside the car...
If you have parked the car for a long time in hot
or cold weather, wait until the temperature in
the car becomes normal before operating the
unit.
EN02-07_KD-SV3205[UN]_2.indd 3EN02-07_KD-SV3205[UN]_2.indd 3 1/11/06 11:39:37 AM1/11/06 11:39:37 AM

4
ENGLISH
Display window
; Disc information indicators—TAG (ID3
Tag), (folder), (track/file)
a Disc type indicators—WMA, MP3
s Playback source indicators—
CH: Lights up only when CD CH is
selected as the playback source.
DI C: Lights up for the built in CD player.
d Playback mode / item indicators—
RND (random), (disc), (folder),
RPT (repeat)
f LOUD (loudness) indicator
g EQ (equalizer) indicator
h ound mode (C-EQ: custom equalizer)
indicators—JAZZ, CLA IC, HIP HOP,
POP , ROCK, U ER
j Tr (track) indicator
k ource display / Volume level indicator
l Main display
/ Tuner reception indicators— T (stereo),
MO (monaural)
Parts identification
Display window
Control panel
1 (standby/on/attenuator) button
2 OURCE button
3 BAND button
6 (play/pause) button
4 Remote sensor
DO NOT expose the remote sensor to strong
light (direct sunlight or artificial lighting).
5 Loading slot
6 Display window
7 0 (eject) button
8 EQ (equalizer) button
9 4 /¢ buttons
p Control dial
q EL (select) button
w DI P (display) button
e MO (monaural) button
r M ( trong-station equential Memory)
button
t Number buttons
y RPT (repeat) button
u RND (random) button
i M MODE button
o (control panel release) button
EN02-07_KD-SV3205[UN]_2.indd 4EN02-07_KD-SV3205[UN]_2.indd 4 1/11/06 11:39:38 AM1/11/06 11:39:38 AM

ENGLISH
5
Remote controller — RM-RK120
Installing the lithium coin battery
(CR2025)
Aim the remote controller directly at the
remote sensor on the unit. Make sure there is
no obstacle in between.
Warning
• Do not install any battery other than
CR2025 or its equivalent; otherwise, it may
explode.
• tore the battery in a place where children
cannot reach to avoid risk of accident.
• To prevent the battery from over-heating,
cracking, or starting a fire:
– Do not recharge, short, disassemble,
heat the battery, or dispose of it in a fire.
– Do not leave the battery with other
metallic materials.
– Do not poke the battery with tweezers or
similar tools.
– Wrap the battery with tape and insulate
when throwing away or saving it.
Caution
Main elements and features
1 OURCE button
• elects the playback source.
2 (standby/on attenuator) button
• Turns the power on if pressed briefly or
attenuates the sound when the power is
on.
• Turns the power off if pressed and held.
3 2 REV / FWD 3 buttons
• earches for stations if pressed briefly.
• Fast-forwards or reverses the track if
pressed and held.
• Changes the tracks if pressed briefly.
• While listening to an Apple iPod® or a
JVC D. player (in menu selecting mode):
– elects an item if pressed briefly.
(Then, press DOWN ∞ to confirm the
selection.)
4 VOL. + / – buttons
• Adjusts the volume level.
Continued on the next page...
EN02-07_KD-SV3205[UN]_2.indd 5EN02-07_KD-SV3205[UN]_2.indd 5 1/11/06 11:39:39 AM1/11/06 11:39:39 AM

6
ENGLISH
5 ENTER and number buttons
• elects a track/file directly.
– Press the number button(s), then press
ENTER.
– Not used for iPod/D. player operations.
• elects an item from the menu while
playing back a Video CD (VCD) in
Playback Control (PBC) function.
– Press the number button(s), then press
ENTER.
• elects the discs while operating the CD
changer.
– To select disc number 1 – 6, press
number button 1 – 6 briefly.
– To select disc number 7 – 12, press and
hold number button 1 (7) – 6 (12).
6 EQ (equalizer) button
• elects the sound mode (C-EQ: custom
equalizer).
7 BAND 6 button
• Changes the FM/AM bands.
• tops disc playback temporarily. To
resume playback, press the button again.
– While playing a VCD, the playback
scene at the moment stops and remain
still.
– Not used for CD changer, iPod, or
D. player operations.
8 5 UP / DOWN ∞ buttons
• Changes the preset stations.
• Changes the folder of the MP3/WMA
discs if pressed briefly.
• Changes the disc while operating the CD
changer if pressed and held.
• While listening to an iPod or a D. player:
– Pauses/stops or resumes playback with
DOWN ∞.
– Enters the main menu with 5 UP.
(Now 5 UP / DOWN ∞/
2 REV / FWD 3 work as the menu
selecting buttons.)*
9 PBC (Playback Control) button
• Activates or deactivates the PBC function.
p RETURN button
• Returns to the previous menu while
playing a VCD in PBC function.
q O D (On- creen Display) button
• Turn on and off the O D on the monitor.
w AUDIO button
• elects the audio channel for VCD
playback.
* 5 UP : Returns to the previous menu.
DOWN ∞: Confirms the selection.
EN02-07_KD-SV3205[UN]_2.indd 6EN02-07_KD-SV3205[UN]_2.indd 6 1/11/06 11:39:40 AM1/11/06 11:39:40 AM

ENGLISH
7
@ Adjust the sound as you want. See
page 14.)
To drop the volume in a
moment (ATT)
To restore the sound, press
it again.
To turn off the power
Basic settings
• ee also “General settings — P M” on pages
15 and 16.
1
2
1 Canceling the display
demonstrations
elect “DEMO,” then “DEMO OFF.”
2 Setting the clock
elect “CLOCK H” (hour), then adjust
the hour.
elect “CLOCK M” (minute), then
adjust the minute.
3 Finish the procedure.
To check the current clock
time when the power is
turned off
Getting started
Basic operations
Turn on the power.
Ÿ
* You cannot select these sources if they
are not ready or not connected.
! For FM/AM tuner
⁄ Adjust the volume.
Volume level indicator
Volume level appears.
Caution on volume setting
Discs produce very little noise compared
with other sources. Lower the volume
before playing a disc to avoid damaging
the speakers by the sudden increase of the
output level.
EN02-07_KD-SV3205[UN]_2.indd 7EN02-07_KD-SV3205[UN]_2.indd 7 1/11/06 11:39:40 AM1/11/06 11:39:40 AM

8
ENGLISH
Radio operations
~
Ÿ
! Start searching for a station.
When a station is received, searching
stops.
To stop searching, press the same button
again.
To tune in to a station manually
In step ! above...
1
2 Select a desired station frequency.
Lights up when receiving an FM stereo
broadcast with sufficient signal strength.
Selected band appears.
When an FM stereo broadcast is hard to
receive
Reception improves, but stereo effect will be
lost.
To restore the stereo effect, repeat the same
procedure. “MONO OFF appears and the MO
indicator goes off.
Storing stations in memory
You can preset six stations for each band.
FM station automatic presetting —
SSM (Strong-station Sequential
Memory)
1 Select the FM band (FM1 – FM3) you
ant to store into.
2
3
“SSM flashes, then disappears when
automatic presetting is over.
Local FM stations with the strongest signals are
searched and stored automatically in the FM
band.
Lights up when monaural mode is activated.
EN08-13_KD-SV3205[UN]_2.indd 8EN08-13_KD-SV3205[UN]_2.indd 8 1/11/06 11:39:59 AM1/11/06 11:39:59 AM

9
ENGLISH
Manual presetting
Ex.: Storing FM station of 92.5 MHz into preset
number 4 of the FM1 band.
1
2
3
Listening to a preset station
1
2 Select the preset station (1 – 6) you
ant.
To chec the other information while
listening to an FM or AM station
Disc operations
Playing a disc in the unit
All tracks will be played repeatedly until you
change the source or eject the disc.
• If a disc menu appears on the monitor while
playing a VCD with PBC, see page 11.
Before performing any operations, make
sure the following....
• Turn on the monitor and select the
appropriate monitor input before playing a
VCD.
• If you turn on the monitor, you can also
control the MP3/WMA playback by referring
to the monitor screen (see page 12).
• Select the video system suitable for your
monitor (see page 16).
To stop play temporarily
To resume playback, press
the button again
To stop play and eject the
disc
Playing discs in the CD changer
All discs in the magazine will be played
repeatedly until you change the source.
• Ejecting the magazine will also stop playing.
~
* If you have changed the external input
setting to “EXT IN” (see page 16) you
cannot select the CD changer.
Cloc Ô Frequency
Preset number flashes for a while.
EN08-13_KD-SV3205[UN]_2.indd 9EN08-13_KD-SV3205[UN]_2.indd 9 1/11/06 11:40:05 AM1/11/06 11:40:05 AM

10
ENGLISH
To go to the next or previous folders (only for
MP3 or WMA discs)
For MP3 discs:
For WMA discs:
1
2
To locate a particular trac (for CD or VCD with
PBC set to “PBC OFF”) or folder (for MP3 or
WMA discs) directly
To select a number from 01 – 06:
To select a number from 07 – 12:
• To use direct folder access on MP3/WMA
discs, it is required that folders are assigned
with 2-digit numbers at the beginning of their
folder names—01, 02, 03, and so on.
To select a particular track in a folder (for
MP3 or WMA discs):
Ÿ Select a disc.
For disc number from 01 – 06:
For disc number from 07 – 12:
About MP3 and WMA discs
MP3 and WMA “tracks (words “file and
“track are used interchangeably) are recorded
in “folders.
About the CD changer
It is recommended to use a JVC
MP3-compatible CD changer with your unit.
• You can also connect MP3-incompatible
CD changers. However, these units are not
compatible with MP3 discs.
• You cannot use the CH-X99, CH-X100, and
KD-MK series CD changers with this unit.
• You cannot control and play any WMA or
VCD disc in the CD changer.
• Disc text information recorded in the CD
Text can be displayed when a JVC CD Text
compatible CD changer is connected.
• For connection, see Installation/Connection
Manual (separate volume).
To fast-forward or reverse the trac
To go to the next or previous trac s
EN08-13_KD-SV3205[UN]_2.indd 10EN08-13_KD-SV3205[UN]_2.indd 10 1/11/06 11:40:06 AM1/11/06 11:40:06 AM

11
ENGLISH
Playbac Control (PBC) operations
This operation is only possible when using
the remote controller.
1 While playing a VCD....
PBC ON : A menu appears on the
monitor.
PBC OFF : Cancels.
• A menu may be a list of items, submenus,
or some moving pictures.
2 Select the item you ant.
• To select an item from the submenus,
repeat this step.
The selected item starts playback
automatically.
To correct a mis-entry and to return to the
previous menu
On-Screen (OSD) information
This operation is only possible when using
the remote controller.
You can check the track number and elapsed
playing time if the monitor is turned on.
While playing a disc....
• To turn off the On-Screen
Display, press the button
again.
Selecting the audio channel
This operation is only possible when using
the remote controller.
You can select the audio channel to play. ( is is
convenient when playing a Karaoke VCD.)
STEREO : To listen to normal stereo (left/
right) playback.
MONO L : To listen to the L (left) audio
channel.
MONO R : To listen to the R (right) audio
channel.
• The audio channel is automatically set to
“STEREO when you change the disc or
source.
Current/total track
number
Elapsed pla ing time
EN08-13_KD-SV3205[UN]_2.indd 11EN08-13_KD-SV3205[UN]_2.indd 11 1/11/06 11:40:07 AM1/11/06 11:40:07 AM

12
ENGLISH
MP3/WMA control screen operations
You can also control the playback of an MP3/
WMA disc by referring to the monitor.
• The control screen automatically appears on the
monitor when you insert an MP3/WMA disc.
1 Artiste name* (only for MP3 discs)
• The artiste name will scroll on the
monitor if it cannot be shown at a time.
2 Operation mode—PLAY, PAUSE,
FF (fast-forward), FR (fast-reverse),
SELECT (selected track number), REPEAT
TRACK, REPEAT FOLDER, REPEAT OFF,
RANDOM FOLDER, RANDOM DISC,
RANDOM OFF
• Operation mode appears for a while on
the monitor.
3 Folder name*
4 Track title* (only for MP3 discs)
• The track title will scroll on the monitor if
it cannot be shown at a time.
5 Highlighted bar for the current file name*
6 OSD indication—Current/total track
number, Elapsed playing time
• Appears only if you turn on the OSD (see
page 11).
7 Current list/total list number
8 Track list
• The monitor can show 12 tracks at a time
and a maximum of 239 tracks for a disc.
* Some symbols will not be shown (and will be
substituted or blanked) on the control screen.
To select a folder
To select a trac
• Pressing these buttons
repeatedly can also
select tracks from the
previous/next folders.
• See also page 10 for using the buttons on the
control panel to select a folder or track.
Selecting the playbac modes
You can use only one of the following playback
modes at a time.
• For VCD: While PBC (see page 11) is not in
use.
1
2 Select your desired playback mode.
7 Repeat play
Mode Plays repeatedly
TRK RPT : The current track.
FLDR RPT*1 : All tracks of the current
folder.
DISC RPT*2 : All tracks of the current disc.
RPT OFF : Cancels.
EN08-13_KD-SV3205[UN]_2.indd 12EN08-13_KD-SV3205[UN]_2.indd 12 1/11/06 11:40:08 AM1/11/06 11:40:08 AM

13
ENGLISH
• For MP3 disc : When “TAG DISP” is set
to “TAG OFF”
• For WMA disc :
: Clock with the c rrent track n mber
: Elapsed playing time with the c rrent
track n mber
*3 If the current disc is an audio CD or a VCD,
“NO NAME” appears.
*4 Only for the built in CD player.
*5 If an MP3 file does not have Tag information,
folder name and file name appear. In this
case, the TAG indicator will not light up.
Prohibiting disc ejection
You can lock a disc in the loading slot.
To cancel the prohibition, repeat the same
procedure.
7 Random play
Mode Plays at random
FLDR RND*1 : All tracks of the current
folder, then tracks of the next
folder and so on.
DISC RND : All tracks of the current disc.
MAG RND*2 : All tracks of the inserted
discs.
RND OFF : Cancels.
*1 Only while playing an MP3 or a WMA
disc.
*2 Only while playing discs in the CD
changer.
Other main functions
Changing the display information
While playing an audio CD, a CD Text,
or a VCD ith PBC set to “PBC OFF” (see
page 11)
While playing an MP3 or a WMA*4 disc
• Only for MP3 disc : When “TAG DISP”
is set to “TAG ON” (see page 16)
EN08-13_KD-SV3205[UN]_3.indd 13EN08-13_KD-SV3205[UN]_3.indd 13 1/21/06 9:21:55 AM1/21/06 9:21:55 AM

14
ENGLISH
Sound adjustments
You can select a preset sound mode suitable to
the music genre (C-EQ: custom equalizer).
Indication (For)
BAS TRE LOUD
(bass) (treble) (loudness)
USER
(Flat sound) 00 00 FF
ROCK
(Rock or disco music) +03 +01 N
CLASSIC
(Classical music) +01 –02 FF
POPS
(Light music) +04 +01 FF
HIP HOP
(Funk or rap music) +02 00 N
JAZZ
(Jazz music) +02 +03 FF
Adjusting the sound
You can adjust the sound characteristics to your
preference.
1
Preset va ues
Ex.: When “ROCK” is selected
2
Indication [Range]
BAS*1 (bass)
Adjust the bass. [–06 to +06]
TRE*1 (treble)
Adjust the treble. [–06 to +06]
FAD*2 (fader)
Adjust the front and rear speaker balance.
[R06 to F06]
BAL (balance)
Adjust the left and right speaker balance.
[L06 to R06]
LOUD*1 (loudness)
Boost low and high frequencies to produce
a well-balanced sound at low volume level.
[L UD N or L UD FF]
VOL (volume)
Adjust the volume. [00 to 30 or 50*3]
*1 When you adjust the bass, treble, or loudness,
the adjustment you have made is stored for
the currently selected sound mode (C-EQ)
including “U ER.”
*2 If you are using a two-speaker system, set the
fader level to “00.”
*3 Depending on the amplifier gain control
setting. ( ee page 16 for details.)
EN14-19_KD-SV3205[UN]_2.indd 14EN14-19_KD-SV3205[UN]_2.indd 14 1/11/06 11:40:29 AM1/11/06 11:40:29 AM

ENGLISH
15
Continued on the next page...
3 Adjust the PSM item selected.
4 Repeat steps 2 and 3 to adjust other
PSM items if necessary.
5 Finish the procedure.
1
2 Select a PSM item.
Indications Se ectab e settings, [reference page]
DEMO
Display
demonstration
DEMO ON : [Initial]; Display demonstration will be activated automatically
if no operation is done for about 20 seconds, [7].
DEMO OFF : Cancels.
CLOCK H
Hour adjustment
1 – 12, [7]
[Initial: 1 (1:00)]
CLOCK M
Minute adjustment
00 – 59, [7]
[Initial: 00 (1:00)]
DIMMER
Dimmer
ON : Dims the display illumination of this unit.
OFF : [Initial]; Cancels.
TEL
Telephone muting
MUTING 1/MUTING 2 : Select either one which mutes the sounds while
using a cellular phone.
OFF : [Initial]; Cancels.
SCROLL*1
Scroll
ONCE : [Initial]; Scrolls the disc information once.
AUTO : Repeats scrolling (5-second intervals in between).
OFF : Cancels.
• Pressing DISP for more than one second can scroll the display regardless of
the setting.
General settings — PSM
You can change PSM (Preferred Setting Mode) items listed in the table that follows.
Ex.: When “DIMMER” is selected
EN14-19_KD-SV3205[UN]_2.indd 15EN14-19_KD-SV3205[UN]_2.indd 15 1/11/06 11:40:34 AM1/11/06 11:40:34 AM

16
ENGLISH
Indications Se ectab e settings, [reference page]
TAG DISP
Tag display
TAG ON : [Initial]; Shows the Tag information while playing MP3
tracks, [13].
TAG OFF : Cancels.
AMP GAIN
Amplifier gain
control
You can change the maximum volume level of this unit.
LOW PWR : V L 00 – V L 30 (Select this if the maximum power of
the speaker is less than 50 W to prevent them from being
damaged.)
HIGH PWR : [Initial]; V L 00 – V L 50
VIDEO
Video system
PAL : [Initial]; Select this if your monitor is of the PAL color
system.
NTSC : Select this if your monitor is of the NTSC color system.
• Press SEL to activate the selection before you select the other PSM items
to adjust.
E T IN*2
External input
CHANGER : [Initial]; To use a JVC CD changer, [9], an Apple iPod or a
JVC D. player, [17].
E T IN : To use any other external component than the above, [19].
*1 ome characters or symbols will not be shown correctly (or will be blanked) on the display.
*2 Displayed only when one of the following sources is selected—FM, AM, DI C, or LINE IN.
EN14-19_KD-SV3205[UN]_2.indd 16EN14-19_KD-SV3205[UN]_2.indd 16 1/11/06 11:40:35 AM1/11/06 11:40:35 AM

ENGLISH
17
⁄ Adjust the sound as you want. (See
page 14.
• Make sure the equalizer on the iPod or
D. player is deactivated.
To pause*1 or stop*2
p ayback
To resume playback,
press 4 after
pressing M M DE.
To fast-forward or
reverse the track
To go to the next or
previous tracks
*1 For iPod
*2 For D. player
Se ecting a track from the menu
1
2 Enter the main menu.
Now the 5/∞/ 4 /¢
buttons work as the menu selecting
buttons*3.
3 Select the desired menu.
For iPod:
PLAYLIST Ô ARTISTS Ô ALBUMS Ô SONGS
Ô GENRES Ô COMPOSER Ô (back to the
beginning)
For D. player:
PLAYLIST Ô ARTIST Ô ALBUM Ô GENRE
Ô TRACK Ô (back to the beginning)
iPod®/D. player operations
This unit is ready for operating an Apple iPod
or a JVC D. player from the control panel.
Before operating your iPod or D. player:
Connect either one of the following (separately
purchased) to the CD changer jack on the rear
of this unit.
• Interface adapter for iPod®—KS-PD100 for
controlling an iPod.
• D. player interface adapter—KS-PD500 for
controlling a D. player.
• For connection, see Installation/Connection
Manual (separate volume).
• For details, refer also to the manual supplied
with the interface adapter.
Caution:
Make sure to turn off this unit or turn off the
vehicle’s ignition switch before connecting
or disconnecting the iPod or D. player.
Preparations:
Make sure “CHANGER” is selected for the
external input setting, see page 16.
~
Ÿ
Playback starts automatically from
where it has been paused*1 or stopped*2
previously.
! Adjust the volume.
EN14-19_KD-SV3205[UN]_2.indd 17EN14-19_KD-SV3205[UN]_2.indd 17 1/11/06 11:40:36 AM1/11/06 11:40:36 AM

18
ENGLISH
7 Random play
ALBM RND*4
Functions the same as “Shuffle Albums” of
the iPod.
SONG RND/RND ON
Functions the same as “Shuffle Songs” of
the iPod or “Random Play
= On” of the
D. layer.
RND OFF
Cancels.
*4 For iPod: Only if you select “ALL” in
“ALBUMS” of the main “MENU ”
To check the other information while
listening to an iPod or a D. player
4 Confirm the selection.
To move back to the revious menu, ress
¢ after ressing M MODE.
• If a track is selected, layback starts
automatically.
• If the selected item has another layer, you
will enter the layer. Re eat ste s 3 and 4
until the desired track is layed.
• Holding 4 /¢ can ski 10
items at a time.
*3 The menu selecting mode will be canceled:
– If no operations are done for about
5 seconds
– When you confirm the selection of a track
Selecting the playback modes
1
2 Select your desired playback mode.
7 Repeat play
ONE RPT
Functions the same as “Re eat One” of
the iPod or “Re eat Mode
= One” for the
D. layer.
ALL RPT
Functions the same as “Re eat All” of
the iPod or “Re eat Mode
= All” for the
D. layer.
RPT OFF
Cancels.
EN14-19_KD-SV3205[UN]_3.indd 18EN14-19_KD-SV3205[UN]_3.indd 18 1/18/06 9:46:50 AM1/18/06 9:46:50 AM

ENGLISH
19
Other external component
operations
You can connect an external component to
the LINE IN plugs on the rear, and another to
the CD changer jack on the rear using the Line
Input Adapter—K -U57 (not supplied) or AUX
Input Adapter—K -U58 (not supplied).
• For connection, see Installation/Connection
Manual (separate volume).
For listening to the iPod or D. player, refer to
pages 17 and 18.
~
If “EXT IN” does not appear, see page 16
and select the external input (“EXT IN”).
Ÿ Turn on the connected component
and start playing the source.
! Adjust the volume.
⁄ Adjust the sound as you want. (See
page 14.)
To check the other information while
listening to an external component
Clock Ô EXT IN
Maintenance
How to clean the connectors
Frequent detachment will deteriorate the
connectors.
To minimize this possibility, periodically wipe
the connectors with a cotton swab or cloth
moistened with alcohol, being careful not to
damage the connectors.
Moisture condensation
Moisture may condense on the lens inside the
VCD/CD player in the following cases:
• After starting the heater in the car.
• If it becomes very humid inside the car.
hould this occur, the VCD/CD player may
malfunction. In this case, eject the disc and
leave the unit turned on for a few hours until
the moisture evaporates.
How to handle discs
When removing a disc from
its case press down the center
holder of the case and lift the
disc out, holding it by the edges.
• Always hold the disc by the
edges. Do not touch its recording surface.
When storing a disc into its case gently insert
the disc around the center holder (with the
printed surface facing up).
• Make sure to store discs into the cases after
use.
Center holder
Connector
Continued on the next page...
EN14-19_KD-SV3205[UN]_3.indd 19EN14-19_KD-SV3205[UN]_3.indd 19 1/18/06 9:47:25 AM1/18/06 9:47:25 AM

20
ENGLISH
To keep discs clean
A dirty disc may not play correctly.
If a disc does become dirty, wipe it
with a soft cloth in a straight line
from center to edge.
• Do not use any solvent (for example,
conventional record cleaner, spray, thinner,
benzine, etc. to clean discs.
To play new discs
New discs may have some rough
spots around the inner and outer
edges. If such a disc is used, this
unit may reject the disc.
To remove these rough spots, rub the edges with
a pencil or ball-point pen, etc.
Warped disc
Sticker Sticker residue
Stick-on label
Do not use the following discs:
More about this unit
Basic operations
Turning on the power
• By pressing SOURCE on the unit, you can
also turn on the power. If the source is ready,
playback also starts.
Turning off the power
• If you turn off the power while listening to a
disc, disc play will start from where playback
has been stopped previously, next time you
turn on the power.
• For MP3/WMA discs, playback will start from
the beginning of the last playing track.
Tuner operations
Storing stations in memory
• During SSM search...
– All previously stored stations are erased and
stations are stored newly.
– Received stations are preset in No. 1 (lowest
frequency to No. 6 (highest frequency .
– When SSM is over, the station stored in
No. 1 will be automatically tuned in.
• When storing a station manually, the
previously preset station is erased when a new
station is stored in the same preset number.
Disc operations
Caution for DualDisc playback
• The Non-DVD side of a “DualDisc” does
not comply with the “Compact Disc Digital
Audio” standard. Therefore, the use of Non-
DVD side of a DualDisc on this product may
not be recommended.
General
• This unit has been designed to reproduce
CDs/CD Texts, and CD-Rs (Recordable /
CD-RWs (Rewritable in audio CD (CD-DA ,
MP3 and WMA formats.
• This unit cannot playback SVCD, DVDs,
CD-Gs, or CD-I discs.
EN20-25_KD-SV3205[UN]_2.indd 20EN20-25_KD-SV3205[UN]_2.indd 20 1/11/06 11:40:56 AM1/11/06 11:40:56 AM