JVC LT-40HW62U User manual

: , BOM
R0
USER MANUAL
72-JVCT51-EUM1B
2014.3.24
(BRAND NAME)
B.O.M.
(TYPE OF JOB.):
QA
IQC PE
(TO):
Silk Screen Printing
Wash Printing
Four-Colour Printing
Spraying Paint
Plastic Colour
Others
PMC
i)
ii)
iii)
iv)
(SCALE)
(SIZE)
(COLOUR) :
:
:1:1
A5
TCL
ODF
ODF DATE: 1170
CUSTOMER
TCL
PLS. PRINT IN BLACK ON WHITE BACKGROUND.
MATERIALS: COVER PAGES: 200G ARTPAPER;
INNER PAGES: 70G PAPER.
: / : 200 ;
: 70 .
PREPARED BY CHECKED BY: REVIEWED BY:
/
CHECKED BY
JVC
LT-40HW62U/LT-46HW65U(MT51F1)
Downloaded from www.vandenborre.be
姚瑞
娟
数字签名人 姚瑞娟
DN：cn=姚瑞娟，
ou=Shenzhen，
dc=com
日期：2014.03.24
14:02:43 +08'00'
邱
荣
数字签名人 邱荣
DN：cn=邱荣，
ou=Shenzhen, 全
球研发中心, 设计
5所（惠州设计所），
dc=com, tclking
日
期：2014.03.24
16:20:04 +08'00'

EDGE LED TV
LT-40HW62U LT-46HW65U
MANUEL DE L'UTILISATEUR
USER MANUAL
GEBRUIKSAANWIJZING MANUAL DEL USUARIO
NÁVOD K OBSLUZE NÁVOD NA POUŽÍVANIE
Français EnglishNederlandsEspañolČesky
Slovenčina
Downloaded from www.vandenborre.be

* Manufactured under license from Dolby and the double-D symbol are trademarks
of Dolby Laboratories.
* This product is protected by certain intellectual property rights of Microsoft.
* The “HD TV” Logo and “1080p” qualier Logo are trademarks of
DIGITALEUROPE.
* DVB and the DVB logos are trademarks of the DVB project.
* THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO
LICENSE FOR THE PERSONAL USE OF A CONSUMER OR OTHER USES
IN WHICH IT DOES NOT RECEIVE REMUNERATION TO (i) ENCODE VIDEO
IN COMPLIANCE WITH THE AVC STANDARD (*AVC VIDEO*) AND/OR (ii)
DECODE AVC VIDEO THAT WAS OBTAINED FROM A VIDEO PROVIDER
LICENSED TO PROVIDE AVC VIDEO. NO LICENSE IS GRANTED OR SHALL
BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION MAY BE
OBTAINED FROM MPEG LA, L.L.C. HTTP://WWW.MPEGLA.COM
* HDMI, the HDMI Logo and High-Denition Multimedia Interface are trademarks
or registered trademarks of HDMI Licensing LLC in the United States and other
countries.
Downloaded from www.vandenborre.be

Downloaded from www.vandenborre.be

On screen display
Back
Exit
Select
3D-to-2D Off
Distance to TV
Image safety
L-R switch Off
Off
Protrude
Depth of field 16
3D mode 2D-to-3D
3D
16
10
Figure 5
Initial setup
Please select your language:
Language
English
Български
Hrvatska
Česky
Dansk
Select Next
Channel install
Automatic search
Automatic update
Analogue manual scan
Antenna manual installation
Clean channel list
Back
Exit
Select
Enter
Exit
Menu
OK
Figure 1 Figure 2
Picture
Sound
PAP
Options
Lock
Setup
Media
Smart TV
Media
Picture Sound Network Settings
Smart TV Channels Source
Subtitle
Subtitle
Digital subtitle language
Digital subtitle language 2nd
Subtitle type
On
English
English
Normal
Back
Exit
Select
Exit
Menu
Figure 3 Figure 4
Downloaded from www.vandenborre.be

EN 1
Important information
Safety
Ensure that your domestic mains supply voltage matches
the voltage indicated on the rating label located at the back
of your set. Where the mains plug or an appliance coupler is
used as disconnect device, it shall remain readily operable.
On certain models, the light indicator is located at the side of
the TV set. The absence of a light indication at the front does
not mean that the TV set is fully disconnected from the mains.
To disconnect the TV set completely, the mains plug must be
pulled out.
The TV set’s components are sensitive to heat. The maximum
ambient temperature should not exceed 35º Celsius. Do
not cover the vents at the back or sides of the TV set. Leave
sufcient space around it to allow adequate ventilation. Install
the appliance away from any source of heat (replace, etc.) or
appliances creating strong magnetic or electric elds.
Moisture in rooms where the set is installed should not exceed
80% humidity. Moving the set from a cold place to a warm
one can cause condensation on the screen (and on some
components inside the TV set). Let the condensation evaporate
before switching the TV set on again.
WARNINGS
This appliance is intended for domestic household use only
and should not be used for any other application, such as for
non-domestic use or in a commercial environment.
If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualied persons in
order to avoid a hazard.
The ventilation should not be impeded by covering the
ventilation openings with items, such as newspapers, table-
cloths, curtains, etc.
The apparatus shall not be exposed to dripping or splashing
and no objects lled with liquids, such as vases shall be placed
on the apparatus.
No naked ame sources, such as lighted candles,
should be placed on the apparatus.
WARNING: To prevent injury, this apparatus must be securely
attached to the oor/wall in accordance with the installation
instructions.
CAUTION: Connect headphones with the volume set low and
increase if required. Prolonged listening through headphones
at high volume settings can result in hearing damage.
Ventilation
Place the television on a hard at surface away from direct
sunlight or heat sources. If it is in a cabinet, allow at least a
10cm gap all around. Do not obstruct the ventilation slots,
including those underneath with soft furnishings.
Overheating will shorten the life of the television and increase
the risk of re.
Eye Fatigue
When using this product as a computer monitor, health and
safety experts recommend short frequent breaks rather than
occasional longer breaks. For example a 5-10 minute break
after an hour of continuous screen work is considered to be
better than a 15 minute break every 2 hours.
Do not use the monitor against a bright background or where
sunlight or other bright light sources will shine directly onto the
screen.
The button on the TV set or the button on the remote
control can be used to switch it on and put it into standby
mode. If you are not going to be watching the TV for a
lengthy period of time, switch it off completely by removing
the plug from the mains power socket.
During thunderstorms, we recommend that you disconnect
the TV set from the mains and aerial so that it is not affected by
electrical or electromagnetic surges that could damage it. For
this reason, keep the mains and aerial sockets accessible so
they can be disconnected, if necessary.
Unplug the TV set immediately if you notice it giving off a
smell of burning or smoke. You must never, under any
circumstances, open the TV set yourself, as you run the risk of
an electric shock in doing so.
TV screen
The TV screen used in this product is made of glass. Therefore,
it can break when the product is dropped or impacted upon by
other objects.
The TV screen is a very high technology product, giving you
nely detailed pictures. Occasionally, a few nonactive pixels
may appear on the screen as a xed point of blue, green or
red. This does not affect the performance of your product.
Care
Use a glass-cleaning product to clean the screen and a soft
cloth and mild detergent to clean the rest of the set.
Important: Using strong detergents, alcohol-based and
abrasive products may damage the screen.
Dust the vents at the back and sides regularly. Using solvents,
abrasive or alcohol-based products could damage the TV set.
If an object or liquid enters the appliance, unplug it immediately
and have it checked by an authorized engineer. Never open
the appliance yourself since this may put you at risk or damage
the appliance.
Important:
Batteries shall not be exposed to excessive heat such as
sunshine, re or the like. Remove batteries when the remote
control is not to be used for a long time. Batteries left in
equipment may cause damage through deterioration and
corrosive leakage, invalidating the guarantee.
To protect the environment use local recycling facilities for
battery disposal. Dispose of used batteries according to the
instructions.
CAUTION: Risk of explosion if batteries are replaced by an
incorrect type. Replace only with the same or equivalent type
recommended by the equipment manufacturer.
Hanging the TV set on the wall
Warning: This operation requires two people.
To ensure a safe installation, observe the following safety
notes:
• Check that the wall can support the weight of the TV set
and wall mount assembly. The TV can be mounted on a
wall using a 200mm x 200mm (LT-40HW62U) or 400mm
x 200mm (LT-46HW65U) VESA mounting kit supplied
separately.
• Follow the mounting instructions provided with the wall
mount. For certain models, make sure to screw the
hexagonal VESA wall mounting screw bosses (and screws)
provided with the set into the nuts for the wall mount at the
back of your set before your wall mounting.
• The TV set must be installed on a vertical wall.
• Make sure to use only screws suitable for the material of the
wall. The screw thread length must not exceed 15mm
(LT- 40HW62U) or 8mm (LT-46HW65U) into the TV.
Downloaded from www.vandenborre.be

EN 2
Information for Users on Disposal of Old
Equipment and Batteries
[European Union]
These symbols indicate that the electrical and
electronic equipment and the battery with this
symbol should not be disposed of as general
household waste at its end-of-life. Instead,
the products should be handed over to the
applicable collection points for the recycling
of electrical and electronic equipment as well
as batteries for proper treatment, recovery
and recycling in accordance with your national
legislation and the Directive 2002/96/EC and
2006/66/EC.
By disposing of these products correctly, you
will help to conserve natural resources and will
help to prevent potential negative effects on
the environment and human health which could
otherwise be caused by inappropriate waste
handling of these products.
For more information about collection points
and recycling of these products, please contact
your local municipal ofce, your household
waste disposal service or the shop where you
purchased the product.
Penalties may be applicable for incorrect
disposal of this waste, in accordance with
national legislation.
[Business users]
If you wish to dispose of this product, please
contact your supplier and check the terms and
conditions of the purchase contract.
[Other Countries outside the European
Union]
These symbols are only valid in the European
Union. If you wish to dispose of these items,
please do so in accordance with applicable
national legislation or other rules in your country
for the treatment of old electrical equipment and
batteries.
Notice:
The sign Pb
below the
symbol for
batteries
indicates that
this battery
contains lead.
Dear Customer,
This apparatus is in conformance with the valid European directives and standards regarding electromagnetic compatibility and
electrical safety.
European representative of the manufacturer is:
TCL Operations Polska Sp. z o.o.
ul. A. Mickiewicza 31/41
96-300 Żyrardow, Poland
Email address: [email protected]
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. Product design and specications may be
changed without notice.
Products
Battery
• Make sure that the TV set cables are placed so that there is
no danger of tripping over them.
All other safety instructions about our TV sets are also
applicable here. For more information, refer to the instruction
installations printed separately.
Placing the TV on a table and other surfaces
Before setting up your television set, make sure that the
surface you want to put the set on can support its weight.
Do not place the set on an unstable surface (e.g. moving
shelf, very edge of a unit) and make sure that the front of the
television set does not overhang the surface it is standing on.
To avoid TV from falling please fasten TV to the wall by using
necessary screws (in Vesa wall mount holes), clamps, anchors
to be bought separately. Install TV near to the wall to avoid
falling backwards.
Multi product user manual
The features described in this manual are common to most
models. Some features may not be available on your TV and/
or your TV may include features that are not described in this
user manual. The illustrations in this manual may differ from
the actual product. Please refer to the actual product.
Downloaded from www.vandenborre.be

EN 3
English
Contents
Important information................................................. 1
Chapter 1- Connections
Connect the power and antenna ............................... 4
DVD player, home theatre system, PC...................... 4
DVD recorder, headphones, cable receiver ............... 5
Blu-ray Disc player, HD game console &
HD camcorder ........................................................... 5
Chapter 2 - Getting started
Remote control functions ........................................... 6
Switch the TV on and off ........................................... 7
Chapter 3 - Installing channels
Initial setup ................................................................ 8
Performing an automatic channel search .................. 8
Chapter 4 - Using your TV
Accessing channels ................................................... 9
Watching connected devices ..................................... 9
Volume ...................................................................... 9
Using TV menus ........................................................ 9
Selecting menu language ........................................ 10
Chapter 5 - Using more of your TV
Setting up your favourite channels .......................... 10
Energy saving .......................................................... 10
Viewing TV using the 3D function............................ 10
Audio description ..................................................... 10
PAP function .............................................................11
Using subtitles ..........................................................11
Turning on/off subtitles .............................................11
Enabling subtitle languages on digital TV channels . 11
Selecting a subtitle type on digital TV channels ....... 11
Selecting decoding page language in Teletext .........11
Digital Teletext language ..........................................11
SPDIF type ...............................................................11
T-Link....................................................................... 12
Enabling or disabling T-Link .....................................12
Using one-touch play ................................................12
Using system standby...............................................12
Network update ....................................................... 12
Common interface ................................................... 12
Using the common interface module ........................12
Accessing common interface services......................12
Software update ...................................................... 12
Changing to Shop or Home mode ........................... 13
MHEG function ........................................................ 13
Viewing photos, playing music and watching videos
from a USB storage device...................................... 13
Photo ........................................................................13
Music ........................................................................13
Video.........................................................................14
DivX video.................................................................14
Time access ............................................................ 14
Diagnostics on digital TV channels.......................... 14
Time shift ................................................................. 14
Reset shop .............................................................. 15
Customising the input settings................................. 15
Using Electronic programme guide ......................... 15
PVR (Personal Video Recorder).............................. 15
Schedule list ............................................................ 16
Chapter 6 - Network
Network connection ................................................. 16
Connecting to a wired network .................................16
Connecting to a wireless network .............................17
TV remote ................................................................ 17
Chapter 7 - DLNA (Share & See)
Connecting to your PC ............................................ 17
Enabling DLNA function........................................... 18
Adding media from your PC for sharing .................. 18
DLNA application ..................................................... 18
Chapter 8 - HbbTV
HbbTV access ......................................................... 18
HbbTV deactivation ................................................. 18
Chapter 9 - Smart TV
Access Smart TV Applications (Apps) ..................... 18
YouTube ...................................................................19
Netix ........................................................................19
Skype ........................................................................19
Chapter 10 - Other information
Password in Parental Control .................................. 19
OSS Notice .............................................................. 19
Troubleshooting and Help Line ................................ 21
Specications .......................................................... 24
Downloaded from www.vandenborre.be

EN 4
LAN VGA
HDMI 2HDMI 3 (ARC)
Manufactured u nder licens e from Dolby L aboratories. Dolby and the
double-D symbol are trademarks
of Dolby Laboratorie s.
Connections
Chapter 1
Connect the power and antenna
To switch on TV after connecting power cord, press O .
Note: Position of power socket varies according to TV model. On certain models, you have to turn on the power
switch rst.
Notes:
-Disconnect the power cord before connecting devices.
DVD player, home theatre system, PC
Notes:
-Before connecting a PC, set the PC monitor refresh rate to 60Hz.
-It is recommended to use as short as possible high quality HDMI cables to avoid possible interferences.
-It is recommended to use 1m long or shorter VGA cable with ferrite beads in case VGA input is available
in TV and TV is connected using VGA cable. Maximum supported VGA resolution is 1920x1080/60Hz.
Network
connection
Or use an HDMI
connection.
DVD player/
Home theater system
Cable
-PR+
-VOL+
OK
Downloaded from www.vandenborre.be

EN 5
English
Manufactured un der licens e from Dolby L aboratories. Dolby and the
double-D s ymbol are trademarks
of Dolby Laboratori es.
IN
OUT
OUT
Manufactured und er licens e from
Dolby L aboratories. Dolby and the
double-D s ymbol are trademarks of Dolby Laboratori es.
Blu-ray Disc player, HD game console &
HD camcorder
Notes:
-USB connectors are for data input from USB
drives and for connecting other relevant USB
devices where applicable.
-All USB devices have to be directly connected to
TV set without cable extenders. In case extender
is required it has to be as short as possible and
equipped with ferrite beads.
-ARC (Audio Return Channel) function is only
supported on HDMI3 (ARC) port.
-Number of USB ports may vary.
DVD recorder, headphones, cable receiver
Note:
-Excessive sound pressure from earphones and
headphones can cause hearing loss.
DVD
recorder
Set-top box Cable
Blu-ray Disc
player
HD game
console
HD Camcorder
Notes:
-Not all connections available on all models.
-The location of the power socket on the TV may vary according to TV model.
-The positions and names of the function buttons and connectors on the TV may vary
according to TV model.
Connections
Downloaded from www.vandenborre.be

EN 6
Getting started
Chapter 2
Remote control functions
Most of your television's functions are available via the menus that appear on the screen. The remote control supplied
with your set can be used to navigate through the menus and to congure all the general settings.
Note: You are recommended to use the full screen mode. Do not use the display mode with black bars on both sides of the picture (such
as 4:3) for a long time; otherwise the TV screen may be damaged permanently.
ECO
To select desired power saving mode.
V+/-
To control the volume.
INFO
To display programme information, if
available.
SMART TV
To display the Smart TV homepage.
OPTION
To display the function menu to perform
certain operations; to display the
Teletext page in different modes.
MENU
To access the main menu; to return to
the previous menu;
to access the virtual keyboard in Smart
TV.
To return to the previous menu
EXIT
To exit the menu structure or Teletext.
ZOOM-/ZOOM+
To select the picture format.
PRE-CH
To return to the previous channel.
LANG
To select a sound type available for
selected analogue TV programme; to
select an audio language available for
selected digital TV programme.
SLEEP
To toggle among the sleep timer options.
Colour buttons
To select tasks or Teletext pages (see
footnote). The red button can also be
used for MHEG and HbbTV function.
Standby / quit standby.
O
To select the previous photo, music or
video.
To start or pause playback.
To stop playback.
To select the next photo, music or video.
To start fast forward.
Recording button.
Footnote:
Red, green, yellow and blue buttons are
multi-function; please follow on-screen
prompts and section instructions.
To start fast reverse.
TEXT: To toggle Teletext or Mix mode on
or off.
TV
To access TV mode.
GUIDE
To toggle the Electronic Programme
Guide on or off (only available for digital
channels).
To navigate through the menus; to set
functions and change values.
To navigate through the menus; to select
menu options; to switch to the previous or
next photo, song or video in USB function.
SUBTITLE
To select a subtitle language available for
selected digital TV programme.
P+/-
To change channels/To page up or down
in some Smart TV applications.
To switch the sound off and back on.
SOURCE
To select connected devices.
OK
To conrm an entry or selection.
LIST
To display the channel list.
FAV
To bring up the Channel list selection
menu.
3D
To toggle among the 3D input format
options. (This button can only be used for
LT- 46HW65U model.)
Alphanumeric buttons
To enter channel numbers; to enter a letter,
a digit or a symbol in some functions.
◄/►
▲/▼
To operate in some Smart TV applications.
@/
Downloaded from www.vandenborre.be

EN 7
English
If the batteries in your remote control are run down, you can use the buttons on your TV set. In TV mode, they have
the same functions as the corresponding buttons on the remote control. The OK button on the TV set can be pressed
repeatedly to select the required source. In the menus they have the following functions:
PR+ Up
PR- Down
VOL+, Right
VOL-, Left
MENU
OK OK
Getting started
Switch the TV on and off
1. When the power cord is connected, the TV will be turned on directly or be in standby mode. If the TV is in
standby mode, press the Oor PR+ PR- button on the set or the button on the remote control to turn it on.
2. To put the TV into standby mode, press the Obutton on the set or the O button on the remote control. The
TV set remains powered up, but with low energy consumption.
3. To switch the TV off, unplug the mains plug from the mains outlet.
Downloaded from www.vandenborre.be

EN 8
Initial setup
Initial setup involves selecting all the settings required
to be able to search for and store all the analogue
and digital channels you can receive.
Make sure that the television is switched on and
follow all the steps in turn specied hereafter.
Note: If the channel search retrieved only the
analogue channels it could be caused by poor
broadcasting and therefore is not covered
by manufacturer warranty. Manufacturers
cannot be held responsible for lack of or poor
broadcasting in some areas.
The rst time you switch the set on, the Initial setup
wizard opens, which guides you through the initial
setup process.
Initial setup
Please select your language:
Language
English
Български
Hrvatska
Česky
Dansk
Select Next
1. Press ▲/▼ to select your language, then press
OK/► to enter the next step.
2. Press ▲/▼ to select your country, then press
OK/► to enter the next step.
3. Press ▲/▼ to select your location (Home or
Shop), then press OK/► to enter the next step.
4. Press ▲/▼ to select Network connection, then
press OK/► to enter the next step. (for more
information, see "Network connection" section
p.16)
Note: If you select France, you will have to enter the
Password setting menu here in order to set
a password. Use the alphanumeric buttons to
enter a four-digit number for your password.
(Your password cannot be 0000) Re-enter the
same code to conrm the password. After that,
you will enter the next step automatically. (In
this step, you can only press ◄to return to the
previous step.)
5. Press ▲/▼ to select your tuner mode Antenna
or Cable.
- a) If you have selected Antenna.
• Press OK/► to enter.
• Press ▲/▼ to select Digital & Analogue or
Digital or Analogue, then press OK/►.
• Press ▲/▼ to select Scan, then press OK/►
to start the automatic search for all DVB-T
digital and/or analogue channels.
Note: not all contries have Favorite Network
Selection function.
- b) If you have selected Cable.
• Press OK/► to enter.
• Press ▲/▼ to select Digital & Analogue or
Digital or Analogue.
• If you select Digital & Analogue, press OK/►
to enter. Then:
-Press ▲/▼ to select Scan, then press OK/►.
-Press ◄/► to select the scan mode if
available (Full or Advanced).
- If you select Full, press OK to start the
automatic search for all DVB-C digital and/or
analogue channels.
- If you select Advanced, use the numeric
buttons to adjust the values for frequency,
symbol rate, network ID, and use ◄/► to
select the modulation mode; then press OK
to start the search for all DVB-C digital and/or
analogue channels.
• If you select Digital, press OK/► to enter,
then follow all the same steps as for Digital
& Analogue above, to search for all DVB-C
digital channels.
• If you select Analogue, press OK/► to enter,
press ▲/▼ to select Scan, then press OK/► to
start the search for all analogue channels.
Note: To prevent the channel setup process from
being interrupted, wait for the message
indicating that the setup is complete.
6. Before starting the scanning, you can also select
Skip scan to skip the initial setup process. In this
case, to search and store your channels you may
do an automatic channel search by following the
instructions in the next section Performing an
automatic channel search.
7. During the setup, you can follow the hints available
at the bottom of the screen to return to the
previous step by pressing ◄. You can also press
EXIT to exit or interrupt the search halfway.
- At anytime during the initial setup process, you
can press ◄ to return to the previous step.
-Once the initial setup process is complete,
you can press OK to exit the initial setup. The
channels are arranged in a preset order. If you
wish to skip channels, modify the preset order
or rename channels, select Setup > Organiser
and press OK/► to enter.
Performing an automatic channel search
This section describes how to search and store
channels automatically. Instructions are for both
analogue and digital channels. This may be done in
any of the cases below:
- you have selected Skip scan in the Initial setup
Installing channels
Chapter 3
Downloaded from www.vandenborre.be

EN 9
English
modify the preset order or rename channels, select
Settings > Setup > Organiser and press OK/►
to enter. Here you can skip, sort, edit or delete
channels.
Using your TV
Accessing channels
Using the alphanumeric buttons: press the
corresponding alphanumeric buttons to access the
channels.
Using the PR+/- or P+/- buttons: scroll through the
channels.
Watching connected devices
Repeatedly press SOURCE on the remote control
or OK on the TV set to toggle between TV and
other input sources. To resume TV viewing, press
any numeric button to enter the channel, while P+/-
will cycle through all TV channels and other input
sources.
Volume
Volume control: use the VOL +/- buttons on the TV
set or V+/- buttons on the remote control to increase
or decrease the volume.
Sound mute: press the button to temporarily mute
the sound. Press this button again or the V+ button to
restore it.
Using TV menus
1. Press MENU to display the main menu.
Picture
Sound
PAP
Options
Lock
Setup
Media
Smart TV
Media
Picture Sound Network Settings
Smart TV Channels Source
The following items are available in the main menu:
Smart TV, Media, Channels, Source, Picture, Sound,
Network, Settings.
2. Press ▲/▼/◄/► to select the desired item, then
press OK to open the corresponding submenu.
3. In submenus, use ▲/▼ to select menu options,
use ◄/► to set functions or change values. Use
OK to activate a setting. Use OK/► to open the
corresponding submenu.
4. Press MENU to return to the previous menu.
5. Press EXIT to close the menu.
Note: Some options may not be available for
certain signal sources.
Using your TV
Chapter 4
- you see “Please scan channels!” in TV mode
- you want to update your channels.
1. Press MENU on the remote control and select
Settings > Setup > Language. Press ◄/► to
select your desired menu language.
2. Press MENU to return to Setup, press ▲/▼ to
select Country, then press ◄/► and, if required,
enter your password to select your country. The
TV installs and arranges channels according to
your country.
3. Press ▲/▼ to select Tuner mode, then
press ◄/► to select Antenna or Cable.
- a) If you have selected Antenna.
• Press ▲/▼ to select Channel install, and
press OK/► to enter.
Channel install
Automatic search
Automatic update
Analogue manual scan
Antenna manual installation
Clean channel list
Back
Exit
Select
Enter
Exit
Menu
OK
• Select Automatic search, then press OK/► to
display Automatic search.
• Press OK to skip the country selection and
enter the next step. Or use ◄/► to reselect
your country, then press OK to enter.
• Select Digital & Analogue or Digital or
Analogue, then press OK/► to start the
automatic search, which relates to all DVB-T
digital and/or analogue channels.
- b) If you have selected Cable.
• Press ▲/▼ to select Channel install, and
press OK/► to enter.
• Select Automatic search, then press OK/► to
display Automatic search.
• Press OK to skip the country selection and
enter the next step. Or use ◄/► to reselect
your country, then press OK to enter.
- If you select Digital & Analogue, then
press OK/► to enter. Select your scan
mode if available and congure proper cable
information in the same way as in Initial
setup. Press ▲/▼ to select Scan and press
OK/► to start your automatic search relating
to all DVB-C digital and analogue channels.
4. The search may take a few minutes. During the
process, you can press MENU to abort halfway.
5. Once the automatic search ends, press MENU to
return to the previous step or press OK to restart
your channel search.
6. After the automatic search, channels are arranged
in a preset order. If you wish to skip channels,
Downloaded from www.vandenborre.be

EN 10
Using more of your TV
Selecting menu language
You can choose your preferred menu language
following the instructions below.
1. Press MENU to display the main menu.
2. Press ▲/▼/◄/► to select Settings > Setup, then
press OK to enter.
3. Select Language and press OK/► to enter.
4. Press ◄/► to select your desired language in the
Language menu to display the menus.
5. Press EXIT to close the menu.
Using more of your TV
Setting up your favourite channels
You can create a list of your favourite TV channels.
1. Press LIST.
2. Press the yellow button to enter Channel list
selection. Press ▲/▼ to select Favorite list and
press OK to enter.
3. Press the blue button to start editing your favourite
list. Press ▲/▼ to scroll through the channel list
and press OK to select or deselect it.
4. Repeat this procedure to set up other favourite
channels.
5. Press LIST/EXIT to exit.
Shortcut operation: Press FAV on the remote
control to directly enter Channel list selection.
Energy saving
1. Press MENU on the remote control and select
Settings > Setup > ECO Settings > Energy
Saving.
2. Press ◄/► to select a desired power saving mode
to achieve the desired power saving effect.
3. Press EXIT to close the menu.
Shortcut operation: Press ECO on the remote
control to select a desired power saving mode
directly.
Viewing TV using the 3D function
(only for LT-46HW65U)
WARNING:
• Some viewers may experience discomfort while
viewing 3D TV such as dizziness, nausea and
headaches. If you experience any such symptom,
stop viewing 3D TV, remove your 3D glasses and
rest.
• Watching 3D videos too closely or for a long period
of time may harm your eyesight.
• A responsible adult should frequently check on
children who are using the 3D function.
• Do not use the 3D glasses for any other purpose
than viewing 3D videos on a 3D TV.
• Do not use the 3D function or 3D glasses while
walking or moving around, otherwise this may result
in injuries due to running into objects, tripping, and/
or falling.
1. Press MENU on the remote control and select
Picture > 3D navigation, then press ◄/► to
adjust 3D navigation to Manual.
Back
Exit
Select
3D-to-2D Off
Distance to TV
Image safety
L-R switch Off
Off
Protrude
Depth of field 16
3D mode 2D-to-3D
3D
16
10
Note: If 3D navigation is set to Auto, the settings
will be congured automatically.
2. 3D Mode: Wear the 3D glasses rst, then
press ◄/► to select the right 3D input format
among Sideby-Side, 2D-to-3D, Top and Bottom
and Line interleave.
3. L-R Switch: Select On or Off to adjust the 3D
video between the left and right eyes for better 3D
viewing.
4. Depth of Field: Achieve a good 3D effect with the
image converted from the 2D image.
5. 3D-to-2D: Select Left or Right to display the
image in 2D mode (no 3D effect). This function is
deactivated when 3D Mode is set to 2D-to-3D or Off.
6. Press EXIT to close the menu.
Notes:
-3D glasses from other manufacturers may not be
supported.
-All photo functions are disabled in 3D mode.
-If you change to a different signal source
or access Smart TV, the 3D mode will be
automatically disabled.
-Some 3D modes may not be available depending
on the input format of the 3D video source.
-Supported 3D modes:
Analogue TV, AV, CMP: 2D-to-3D
Digital TV, HDMI, USB, Videos from the Internet:
Top and Bottom, Side-by-Side, 2D-to-3D, Line
interleave, Frame sequential.
-3D function in USB mode: During the playback
of a selected video from USB, press MENU to
display the video menu in the browser mode,
then select 3D Mode. For more detail information,
refer to the above related descriptions.
Audio description
Audio description refers to an additional narration
track for blind and visually impaired viewers of visual
media, including television programmes and movies.
The description narrator talks through the presentation
describing what is happening on the screen during
the natural pauses in the audio (and during dialogue if
deemed necessary).
Chapter 5
Downloaded from www.vandenborre.be

EN 11
English
Using more of your TV
You can use this feature if the current broadcast
contains audio description.
1. Press MENU on the remote control and select
Sound, then press OK to enter.
2. Use ▲/▼ to select Audio Description, then press
OK to enter.
3. You can turn the Audio Description function on or
off in the Audio Description menu.
4. To adjust the volume for Audio Description,
press ▲/▼ to go to the next menu line, then
use ◄/► to set the volume.
PAP function
Use this function to display the pictures from different
source inputs side by side. Note that one window is
for both analogue and digital TV inputs, the other is
for VGA, HDMI and CMP inputs. (Note: Not available
for AV on both windows.)
1. Press MENU to display the main menu.
2. Select Picture and press OK to enter.
3. Press ▲/▼ to select the PAP option, and press
OK to enter.
4. Press ◄/► to turn on/off PAP function.
5. Select TV position, press ◄/► to reposition the
TV window.
6. Press EXIT to close the menu.
If you switch on the PAP function, you can press ◄/►
to toggle the focus window (with sound symbolized
by a musical note). When the focus is on the TV
window (with sound symbolised by a musical note),
the alphanumeric buttons and P+/- work in TV mode.
When the focus is on the other window, P+/- switches
available external sources.
Using subtitles
You can enable subtitles for each TV channel.
Subtitles are broadcast via Teletext or DVB-T/DVB-C
digital broadcasts. With digital broadcasts, you have
the additional option of selecting a preferred subtitle
language.
Turning on/off subtitles
1. Press MENU on the remote control and select
Settings > Subtitle.
2. Press OK/►to enter.
Subtitle
Subtitle
Digital subtitle language
Digital subtitle language 2nd
Subtitle type
On
English
English
Normal
Back
Exit
Select
Exit
Menu
3. Select the Subtitle option, and press ◄/► to
select On/Off to turn on/off subtitles.
Enabling subtitle languages on digital TV
channels
1. Press MENU on the remote control and select
Settings > Subtitle > Digital subtitle language.
2. Press ◄/► to select a subtitle language as your
preferred language.
3. Press ▲/▼ to select Digital subtitle language
2nd.
4. Press ◄/► to select a secondary subtitle
language.
5. Press EXIT to close the menu.
Shortcut operation: Press SUBTITLE on the remote
control to directly select a subtitle language available
for the selected digital TV programme.
Selecting a subtitle type on digital TV channels
1. Press MENU on the remote control and select
Settings > Subtitle > Subtitle type.
2. Press ◄/► to select a subtitle type. You can select
Hearing impaired to display the hearing impaired
subtitles with your selected language.
Selecting decoding page language in Teletext
Press MENU on the remote control and select
Settings > Teletext > Decoding page language.
Select a proper type of language in which Teletext will
display.
Digital Teletext language
On digital TV channels, depending on the
broadcaster, you may be able to enjoy a service with
multiple initial Teletext pages in different languages.
This function allows you to select an available
language as primary language, which relates to
different initial Teletext pages.
Press MENU on the remote control and select
Settings > Teletext > Digital teletext language.
Press ◄/► to select.
SPDIF type
Connect the TV to an audio device through the SPDIF
output. To select a proper sound type for your SPDIF
output, press MENU on the remote control and select
Settings > SPDIF type.
- If you select PCM, the SPDIF output format is PCM,
regardless of the programme’s sound format.
- If you select Dolby D, the SPDIF output format is
• Dolby Digital when the programme’s sound format
is Dolby Digital or Dolby Digital Plus or HE-AAC
• PCM when the programme’s sound format is
MPEG.
- If you select Off, this turns off the audio output from
the audio device connected to the SPDIF output.
Downloaded from www.vandenborre.be

EN 12
Using more of your TV
Note: The options you may choose depend on
picture, you can select SPDIF delay from
the Settings menu and press ◄/► to adjust
the delay time to synchronize the sound with
the picture.
T-Link
Use this function to search for CEC devices connected
to the HDMI sockets in your TV and enable one-touch
play and one-touch standby between CEC devices.
Enabling or disabling T-Link
1. Press MENU on the remote control, then select
Settings > T-Link.
2. Press ◄/► to select On or Off, if this function
is turned on, T-Link option will be available in
the Quick access menu which you can enter by
pressing the Option button on the remote control.
Using one-touch play
With one-touch play, pressing the play button on (for
example) your DVD remote control starts playback on
your DVD device and automatically switches your TV
to the correct source, displaying DVD content.
Using system standby
With system standby, pressing the Obutton on (for
example) your TV remote control switches your TV
and all connected HDMI devices to standby mode.
Note: The CEC functions depend on the devices
connected and it is possible that some
devices may not interoperate correctly when
connected to this TV. The user manual or
the manufacturer of the problematic devices
should be consulted for further information.
Network update
Press MENU on the remote control, then select
Settings > Network update. Select On/Off to enable
or disable the Network update function.
- When this function is on, the TV will automatically
update channels if your DTV service provider
updates their DTV network.
- When this function is off, you need to run the
channel search again to get new channels or
remove unavailable channels if your DTV service
provider adds or removes channels from their DTV
network.
Common interface
Encrypted digital TV channels can be decoded with a
common interface module and a card provided by a
digital TV service operator.
The common interface module may enable several
digital services, depending on the operator and
services you choose (for example, pay TV). Contact
your digital TV service operator for more information
about services and terms.
Using the common interface module
WARNING: Switch off your TV before inserting a
common interface module. Be sure to follow the
instructions described below. Wrong insertion of
a common interface module may damage both the
module and your TV.
1. Following the directions printed on the common
interface module, gently insert the module into the
common interface slot on the TV.
2. Push the module in as far as it will go.
3. Turn on the TV and wait for the common interface
function to be activated. This may take several
minutes.
Note: Do not remove the common interface
module from the slot. Removing the module
will deactivate the digital services.
Accessing common interface services
After inserting and activating the common interface
module, press MENU on the remote control and
select Settings > Common interface.
This menu option is only available if the common
interface module is correctly inserted and activated.
On-screen applications and content are provided by
your digital TV service operator.
Software update
Note: Do not switch off or unplug the TV until the
upgrade is completed.
Press MENU on the remote control and select
Settings > Software update. Press OK/► to enter.
-By network: Enables you to download and install
the latest software version from the Internet.
Make sure to set up a wired or wireless network
connection rst then select By network and press
OK/► to enter. When new-version software is
available, a progress bar appears. When the
download nishes, the TV will go black and upgrade
the software.
Note: Keep successful network connection during
upgrade.
-By channel: Enables you to install the latest version
of the software if available from the broadcast.
Use ▲/▼ to select By Channel and press OK/► to
enter.
• Use ◄/► to select Yes under Auto download
to automatically download the latest software
if available. After the software has been
downloaded successfully, you will be prompted
to decide if you want to install it right now. If yes,
follow the on-screen instructions to complete
your installation. You can also select to ignore
the installation here.
Downloaded from www.vandenborre.be

EN 13
English
• Use ◄/► to select No under Auto download to
decline the automatic download.
• Use ▲/▼ to select Manual Download and press
OK/► if you wish to search manually for the
latest software. Follow the on-screen instructions
to complete. During the search, press OK/EXIT
to cancel or exit the process.
Changing to Shop or Home mode
1. Press MENU on the remote control and select
Settings > Location.
2. Press ◄/► to select your location: Shop or Home.
3. Press EXIT to exit.
Note: According to the regulation of European
Commission 2009/125/EC, in Home
mode, TV will be put into standby mode
automatically if there is no operation in
4 hours. This feature can be deactivated in
Settings menu.
MHEG function
Some digital TV broadcasters offer dedicated digital
text or interactive services (for example, BBC1 in the
UK). These services work like normal Teletext with
the addition of number, colour and navigation buttons.
Note: MHEG and subtitles are mutually exclusive
and cannot coexist on the same screen. If
Subtitle is set to On, MHEG will not appear.
Please follow the instructions in the section
Turning on/off subtitles to set Subtitle to
Off.
1. Press the red button or TEXT on the remote
control.
2. Press ▲/▼/◄/► to select or highlight items.
3. Press OK to conrm or activate.
4. Press one of the colour buttons to select an option.
5. Press TEXT or EXIT to exit.
Viewing photos, playing music and watching
videos from a USB storage device
Your TV is tted with a USB connector that enables
you to view photos, listen to music or watch videos
stored on a USB drive.
Supported le formats:
Photo JPEG
Music MP3
Video AVI, MPG, MPEG, TS, DIVX, MKV...
Note: Some USB keys and USB products like
digital cameras or mobile phones are not
fully compatible with USB 2.0 standard so
they may not work with the TV multimedia
player. Not all USB keys or devices are
compatible with the USB function. Not all
above formats are recognised. The encoding
formats of your les will determine whether
or not they can be used.
To enter the Media center menu manually, press
MENU on the remote control and select Media.
Photo
Use this function to display photos, if available.
1. Select Media > Photo, then press OK to enter the
main le content browser.
2. In the main le content browser, use ▲/▼/◄/► to
select a photo or an inner le folder.
3. Select an inner le folder, press OK to enter a sub
le content browser.
4. Use ▲/▼/◄/► to select a photo in either main or
sub le content browser, press MENU to display
the photo menu in folder mode.
-Sort: Sort folders and photos by modication
Date or Name.
-Edit: Copy, paste or delete a selected photo.
-Parser: You can select Recursive to display
photos from all sub le folders.
5. Select a photo, press OK to watch, and a slide
show begins from the selected photo. Press OK to
pause the photo. Press MENU to display the photo
menu in the browser mode. You can play, pause
or rotate the photo, select different play modes and
display effects, etc.
6. Press the related buttons on the remote control
to perform the available functions shown on the
function bar at the bottom of the TV screen. Press
the INFO button to show or remove the function bar.
Shortcut operation: Press the green button on the
remote control to rotate the photo.
Music
Use this function to play back music, if available.
1. Select Media > Music, then press OK to enter the
main le content browser.
2. Use ▲/▼/◄/► to select a song in either main or
sub le content browser in the same way as in
photo display function, press MENU to display the
music menu in folder mode.
-Sort: Sort folders and songs by Name, Genre,
Artist or Album.
-Edit: Copy, paste or delete a selected song.
-Parser: You can select Recursive to display
songs from all sub le folders.
3. Select a song, press OK to play, and automatic
playback begins from the selected song. Press
MENU to display the music menu in the browser
mode. You can play or pause the song, select
different play modes, etc.
-Show lyrics: This option is available for the
songs with lyrics. Select it and use ◄/► to turn
on/off lyrics synchronized display.
-Audio only: Select and press OK to listen to the
music with the screen turned off. Pressing any
key will turn the screen on.
Using more of your TV
Downloaded from www.vandenborre.be

EN 14
Using more of your TV
4. Press the related buttons on the remote control
to perform the available functions shown on the
function bar at the bottom of the TV screen.
Video
Use this function to watch videos, if available.
1. Select Media > Video, then press OK to enter the
main le content browser.
2. Use ▲/▼/◄/► to select a video in either main
or sub le content browser in the same way as in
photo display function, press MENU to display the
video menu in folder mode.
-Sort: Sort folders and videos by Type,
modication Date or Name.
-Edit: Copy, paste or delete a selected video.
-Parser: You can select Recursive to display
videos from all sub le folders.
3. Select a video, press OK to watch, and automatic
playback begins from the selected video. Press
MENU to display the video menu in the browser
mode. You can play or pause the video, select
different play modes, screen modes and preset
picture settings, etc.
4. Press the related buttons on the remote control
to perform the available functions shown on the
function bar at the bottom of the TV screen. Press
the INFO button to show or remove the function
bar.
DivX video
ABOUT DIVX VIDEO: DivX® is a digital video
format created by DivX, LLC, a subsidiary of Rovi
Corporation. This is an ofcial DivX Certied®
device that plays DivX video. Visit divx.com for more
information and software tools to convert your les
into DivX videos.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX
Certied® device must be registered in order to play
purchased DivX Video-on-Demand (VOD) movies.
Obtain your registration code:
• Press MENU on the remote control.
• Select Settings > DivX(R) registration.
• Press OK/► and your registration code will be
displayed.
Go to vod.divx.com for more information on how to
complete your registration.
Deregister your TV:
If you wish to deregister your TV,
• Press MENU on the remote control.
• Select Settings > DivX(R) deregistration.
• Press OK/► and a message will guide you.
DivX®, DivX Certied®, DivX Plus® HD and
associated logos are trademarks of Rovi Corporation
or its subsidiaries and are used under license.
Time access
You can access the time from digital channels
following the instructions below.
1. Press MENU on the remote control and
select Settings > Timer > Clock > Auto
synchronization.
2. Press ◄/► to select On.
To set the time manually, switch off the Auto
synchronization.
Diagnostics on digital TV channels
1. Press MENU on the remote control and select
Settings > Setup > Diagnostics.
2. Press OK/► to display some signal information on
the current digital channel, such as signal strength,
frequency, etc.
Time shift
Allows you to record the TV programme so that you
will not miss the favourite part even if you go out.
Before you use the function, connect a USB drive to
the TV rst. For the rst time, you should do the disk
setup for the USB drive.
Note: This feature is available only in selected
products and, due to specic TV
network limitations and country technical
requirements, might not be available in
product or place of installation. This feature
might also be blocked by TV network due to
copyright protection (HD content, recording
protection). Please use OPTION on the
remote control to check if this feature is
available in your product.
1. Press MENU on the remote control and select
Settings > Setup > Time shift.
2. Press ◄/► to select On to switch on the time shift
function, then press EXIT to close the menu.
3. Press OPTION on the remote control and select
Time shift, then press OK to conrm.
4. Follow the directions on the screen to do the setup.
5. After the disk setup is done, press OPTION and
select Time shift.
6. Press OK to display the time shift menu.
-Press the pause button to pause the picture
and begin the time shift.
-Press the pause button to play the recorded
part.
-When the time shift menu disappears and only
the timing of the time shift remains on the screen,
you can press the pause button or OK to
access the time shift menu.
-Press the fast backward button◄◄ to fast
backward or the fast forward button ►► to fast
forward.
-Press the stop button to quit the time shift
function.
Downloaded from www.vandenborre.be

EN 15
English
-Before you connect the USB drive to the TV,
make sure you have backed up the data in the
drive to avoid the loss of your important data due
to unforeseen malfunction.
-We recommend you use a USB drive with free
capacity above 1GB and disk speed faster than
5.0MB/sec.
-The bigger the USB drive free memory for time
shift, the bigger the recording length.
-If you change the channel in time shift mode, a
message prompts you to select Yes or No. You
can select Yes to exit the time shift function and
execute the channel change.
Reset shop
Allows you to reset the TV to factory default settings.
1. Press MENU on the remote control and select
Settings > Setup, then press OK to conrm.
2. Select Reset shop and press OK/► to enter.
3. Use the alphanumeric buttons to enter the
password.
Note: The super password is 0423. If you forget
your code, enter the super password to
override any existing codes.
4. Press ◄/► to select OK and press OK to conrm.
5. The Initial setup menu appears. Follow the
related instructions.
Customising the input settings
You can congure your TV according to the
equipment you connect to it.
1. Press MENU on the remote control and select
Settings > Setup > Input settings.
2. Press OK/► to enter Input settings.
3. Press ▲/▼ to select a connector your equipment
is connected to.
4. Press ◄/► to select the type of apparatus
attached to this connector.
5. Press MENU to return to the Setup menu.
After conguring, the selected source label will be
displayed after the name of the related connector in
the source list when pressing SOURCE on the remote
control or OK on the TV set.
Using Electronic programme guide
EPG is an on-screen guide that displays scheduled
TV programmes. You can navigate, select, view and
record programmes.
1. Press GUIDE on the remote control, the Now
and Next EPG menu will appear, which allows
you to get information about the current or next
programme playing on each channel. Navigate
through the different programmes using the
navigation buttons on the remote control.
2. Use the colour buttons to view the 8 Days EPG.
-Prev day (Red): Lists the previous day’s EPG.
-Next day (Green): Lists the next day’s EPG.
-View detail (Yellow): Displays the description of
this programme if available.
-Type lter (Blue): Programme guide lter for
digital TV programmes.
• Press the blue button to display the
programmes’ type and subtype lists.
• Navigate through the different types and
subtypes using the navigation buttons on the
remote control.
• Select one or more types, which you want to
highlight from the Type list, press OK to select
(or deselect). A checkmark will appear to
the left of the type when selected. When you
select a type, all its subtypes will be selected
automatically.
• Also, you can select some desired subtypes
without selecting any type rst.
• Press the blue button to exit the type and
subtype list.
• After ltering, all your desired digital TV
programmes will be highlighted.
-Add schedule (Option): Press OPTION on the
remote control to bring up the Schedule list
menu. For details on scheduled recording, refer
to the Schedule list section.
3. Press GUIDE/EXIT to exit the EPG and switch to
the selected channel.
PVR (Personal Video Recorder)
Allows you to record your favourite TV programmes.
Before you use the function, connect a USB drive to
the set rst. When using this function for the rst time,
you should setup the disk for the USB device.
Note: This feature is available only in selected
products and, due to specic TV
network limitations and country technical
requirements, might not be available in
product or place of installation. This feature
might also be blocked by TV network due to
copyright protection (HD content, recording
protection). Please use OPTION on the
remote control to check if this feature is
available in your product.
1. Press OPTION on the remote control and in the
Quick access menu, select PVR.
2. Press OK/► to enter.
3. Press:
-the recording button to start recording, the record
le is put into a folder named after the channel
number under the PVR folder in Media > Video;
-▲/▼/◄/► to adjust the recording duration.
-the green or Stop button to stop recording
manually; in normal operation, the recording will
stop automatically when the recording duration
has passed.
Using more of your TV
Downloaded from www.vandenborre.be