JVC CL-R190 User manual

Important
To get the most from your purchase, please read this Instruction Manual carefully before
use. Keep this manual in a safe and easily accessible place. Please make sure to have
the warranty with the date of purchase signed by the dealer.
19.0-inch (48 cm) Color LCD Monitor
Instruction Manual
B5A-3034-01
Model:CL-R190BN0EA

- 2 -
English
* Windows is a registered trademark of Microsoft Corporation in the United States and/or
other countries.
* VESA is a trademark of the Video Electronics Standard Association.
* All other products and company names are trademarks of their respective owners.

- 3 - English
Contents
Before use .........................................................................................................4
Product security................................................................................................12
Safety precautions ...........................................................................................14
Package contents ............................................................................................18
Features ..........................................................................................................19
Names and functions of parts ..........................................................................20
For Instruction personnel
Connecting the cables .....................................................................................22
DVI connection ............................................................................................22
DisplayPort connection ................................................................................23
VGA connection ...........................................................................................24
DC Power Supply (DC Jack) and AC power connection...............................25
USB connection ............................................................................................26
Operating Principle...........................................................................................27
OSD controls ...................................................................................................28
1. OSD control panel ....................................................................................28
2. OSD menu hierarchy ...............................................................................29
3. OSD Menu and the functions ...................................................................31
4. How to use LCD Check.exe .....................................................................35
Attaching an arm stand ....................................................................................36
Antitheft security slot ........................................................................................36
Supported signals ............................................................................................37
1. Supported signal timings ..........................................................................37
2. Connector pin assignment .......................................................................38
Reference.........................................................................................................40
For Instruction personnel or users
Cleaning the monitor .......................................................................................41
When a failure is suspected .............................................................................42
After-sales service ...........................................................................................43
Technical specication .....................................................................................45

- 4 -
English
Before use
Thank you for purchasing our color LCD CL-R190. Please read this manual carefully for
proper use.
For your safety
This manual contains important information on how to use the product. Please make
sure to read the Safety Precautions section rst and keep this manual in a safe and
easily accessible place for future reference.
Indication for use
19.0 inch (48 cm) 1.3M pixel Color LCD Monitor CL-R190 (CL-R190BN0EA) is intended
to be used in displaying and viewing medical images for diagnosis by trained medical
practitioners or certied personnel.
It is not meant to be used in digital mammography.
Caution:
Federal law restricts this device to sale by or on the order of a physician.
Limitation of liability
We are not liable for damages
●arising from re, earthquakes, actions taken by any third party, any other accidents,
intentionally or negligently, improper use of the product by the user, or any use under
other abnormal circumstances,
●(including, but not limited to, loss of business prots, disruption of business, change or
loss of saved data) arising from the use of or inability to use this product,
●disassemble or modify, the Company does not take any responsibility.
●arising from the use not described in the Instruction manual,
●arising from malfunctions caused by the combination of connecting devices, or
●(related to the time limit, business, decrease in prots, any delay, any information, and
other nancial disadvantages) arising from the use of the software provided by us for
this product, even if we have been advised of the possibility of such damages.
Uninterruptible power supply
Instantaneous voltage drop due to, for instance, lightning, could cause a power failure.
We recommend that an uninterruptible power supply system be used to avoid failure.

- 5 - English
Conformity
This device complies with the requirements of the European Medical Device
Regulation (EU) 2017/745 (“MDR”).
Medical Device Classication: Class I
Manufacturer
JVC KENWOOD Corporation
3-12, Moriya-cho, Kanagawa-ku,
Yokohama-shi, Kanagawa
221-0022, JAPAN
Authorized representative
JVCKENWOOD Deutschland GmbH
Konrad-Adenauer-Allee 1-11, 61118 Vilbel, GERMANY
TEL: [phone] (German, English)
e-mail: [email protected]
Warning
●This apparatus must be earthed because of Class I equipment.
●This apparatus is not a patient contact equipment.
●Consult your dealer about waste disposal.
●This apparatus shall not to be used in the vicinity of the patient, which is the space with
surfaces likely to be contacted by the patient or an attendant who can touch the patient.
This encloses a space within the room 1.83 m (6 feet) beyond the perimeter of the bed
in its intended location, and extending vertically 2.29 m (7-1/ 2 feet) above the oor.
●To avoid the risk of electric shock, this equipment must only be connected to a supply
mains with protective earth.
Equipment Classication
●Type of protection against electric shock: Class I equipment
●Protection against harmful ingress of water: Ordinary Equipment (IPX0)-No protection.
●Not suitable for use in the presence of ammable anesthetics or oxygen.
●Mode of operation: Continuous operation

- 6 -
English
EMC Performance
WARNING
• This product requires special EMC precautions and needs to be installed and used
according to the following information.
• Use of accessories, transducers and cables other than those specied or provided by the
manufacturer of this equipment could result in increased electromagnetic emissions or
decreased electromagnetic immunity of this equipment and result in improper operation.
• Cable length: Less than 3 m.
• Use of this equipment adjacent to or stacked with other equipment should be avoided
because it could result in improper operation. If such use is necessary, this equipment and
the other equipment should be observed to verify that they are operating normally.
• Portable RF communications equipment (including peripherals such as antenna cables and
external antennas) should be used no closer than 30 cm (12 inches) to any part of the
model CL-R190 including cables specied by the manufacturer. Otherwise, degradation of
the performance of this equipment could result.
• Any additional equipment connected to this product needs to comply with the requirements
of IEC60601-1-2:2014/EN60601-1-2:2015.
Environments of Intended Use
The model CL-R190 is intended to be used in Home healthcare environment such as
residences and nursing homes.
Guidance and Manufacturer’s Declaration -
Electromagnetic Compatibility
Guidance and manufacturer’s declaration – electromagnetic emissions
The model CL-R190 is intended for use in the electromagnetic environment specied below.
The customer or the user of the model CL-R190 should assure that it is used in such an
environment.
Emissions test Compliance Electromagnetic environment
– guidance
RF emissions CISPR 11 Group 1 The model CL-R190 uses RF energy
only for its internal function. Therefore,
its RF emissions are very low and are
not likely to cause any interference in
nearby electronic equipment.
RF emissions CISPR 11 Class B The model CL-R190 is suitable for use
in all establishments, including domestic
establishments and those directly
connected to the public low-voltage
power supply network that supplies
buildings used for domestic purposes.
Harmonic emissions
IEC 61000-3-2
Class D
Voltage uctuations/icker
emissions
IEC 61000-3-3
Complies

- 7 - English
Guidance and manufacturer’s declaration – electromagnetic immunity
The model CL-R190 is intended for use in the electromagnetic immunity environment (Home
healthcare environment dened in IEC60601-1-2) specied below. The customer or the user of
the model CL-R190 should assure that it is used in such an environment.
Immunity test IEC 60601 test level Compliance level Electromagnetic
environment
–guidance
Electrostatic
discharge (ESD)
IEC 61000-4-2
±8 kV contact
±15 kV air
±8 kV contact
±15 kV air
Floors should be wood,
concrete or ceramic
tile. If oors are
covered with synthetic
material, the relative
humidity should be at
least 30 %.
Electrical fast
transient/burst
IEC 61000-4-4
±2 kV for power
supply lines 100 kHz
±1 kV for input/output
lines 100 kHz
±2 kV for power
supply lines 100 kHz
Mains power quality
should be that of a
typical commercial or
hospital environment.
Surge
IEC 61000-4-5
±1 kV line(s) to line(s)
±2 kV line(s) to earth
±1 kV line(s) to line(s)
±2 kV line(s) to earth
Mains power quality
should be that of a
typical commercial or
hospital environment.
Voltage dips, short
interruptions and
voltage variations on
power supply input
lines
IEC 61000-4-11
0 %
U
T(100 % dip in
U
T)
0.5 cycles and
1 cycle
70 %
U
T(30 % dip in
U
T)
25/30 cycles
0 %
U
T(100 % dip in
U
T)
250/300 cycles
0 %
U
T(100 % dip in
U
T)
0.5 cycles and
1 cycle
70 %
U
T(30 % dip in
U
T)
25/30 cycles
0 %
U
T(100 % dip in
U
T)
250/300 cycles
Mains power quality
should be that of a
typical commercial or
hospital environment. If
the user of the model
CL-R190 requires
continued operation
during power mains
interruptions, it is
recommended that the
model CL-R190 be
powered from an
uninterruptible power
supply or a battery.
Power
frequency (50/60 Hz)
magnetic eld
IEC 61000-4-8
30 A/m
50Hz or 60Hz
30 A/m
50Hz or 60Hz
Power frequency
magnetic elds should
be at levels
characteristic of a
typical location in a
typical commercial or
hospital environment.
The product should be
kept at least 15 cm
away from the source
of power frequency
magnetic elds during
use.
NOTE
U
Tis the a.c. mains voltage prior to application of the test level.

- 8 -
English
Guidance and manufacturer’s declaration – electromagnetic immunity
The model CL-R190 is intended for use in the electromagnetic immunity environment (Home
healthcare environment dened in IEC60601-1-2) specied below. The customer or the user of
the model CL-R190 should assure that it is used in such an environment.
Immunity IEC 60601 test
level
Compliance
level
Electromagnetic environment
– guidance
Proximity
electromagnetic
eld from RF
wireless
communication
equipment
(Specied the table
below)
Portable and mobile RF
communications equipment should
be used no closer to any part of
the model CL-R190, including
cables, than the recommended
separation distance calculated
from the equation applicable to the
frequency of the transmitter.
Conducted RF
IEC 61000-4-6
3 V
0.15 MHz to 80 MHz
6 V
ISM bands and
amateur radio
between
150 kHz and
80 MHz
80% AM at 1kHz
3 V
0.15 MHz to 80 MHz
6 V
ISM bands and
amateur radio
between
150 kHz and
80 MHz
80% AM at 1kHz
Recommended separation
distance
d= 1.2
Radiated RF
IEC 61000-4-3
10 V/m
80 MHz to 2.7 GHz
80% AM at 1kHz
10 V/m
80 MHz to 2.7 GHz
80% AM at 1kHz
d= 1.2 80 MHz to 800 MHz
d= 2.3 800 MHz to 2.7 GHz
where Pis the maximum output
power rating of the transmitter in
watts (W) according to the
transmitter manufacturer and dis
the recommended separation
distance in meters (m).
Field strengths from xed RF
transmitters, as determined by an
electromagnetic site survey, a
should be less than the
compliance level in each frequency
range. b
Interference may occur in the
vicinity of equipment marked
with the following symbol:

- 9 - English
NOTE1: UTis the a.c. mains voltage prior to application of the test level.
NOTE2: At 80 MHz and 800 MHz, the higher frequency range applies.
NOTE3: Guidelines regarding conducted disturbances induced by RF elds or radiated RF
elds may not apply in all situations. Electromagnetic propagation is a󰀨ected by
absorption and reection from structures, objects and people.
NOTE4: The ISM (industrial, scientic and medical) bands between 0.15 MHz and 80 MHz are
6.765 MHz to 6.795 MHz; 13.553 MHz to 13.567 MHz; 26.957 MHz to 27.283 MHz;
and 40.66 MHz to 40.70 MHz . The amateur radio bands between 0.15 MHz and
80 MHz are 1.8 MHz to 2.0 MHz, 3.5 MHz to 4.0 MHz, 5.3 MHz to 5.4 MHz, 7 MHz to
7.3 MHz, 10.1 MHz to 10.15 MHz, 14 MHz to 14.2 MHz, 18.07 MHz to 18.17 MHz,
21.0 MHz to 21.4 MHz, 24.89 MHz to 24.99 MHz, 28.0 MHz to 29.7 MHz and
50.0 MHz to 54.0 MHz.
a Field strengths from xed transmitters, such as base stations for radio (cellular/cordless)
telephones and land mobile radios, amateur radio, AM and FM radio broadcast and TV
broadcast cannot be predicted theoretically with accuracy. To assess the electromagnetic
environment due to xed RF transmitters, an electromagnetic site survey should be
considered. If the measured eld strength in the location in which the model CL-R190 is used
exceeds the applicable RF compliance level above, the model CL-R190 should be observed
to verify normal operation. If abnormal performance is observed, additional measures may be
necessary, such as reorienting or relocating the model CL-R190.
b Over the frequency range 150 kHz to 80 MHz, eld strengths should be less than 10 V/m.

- 10 -
English
Recommended separation distances between
portable and mobile RF communications equipment and the model CL-R190
The model CL-R190 is intended for use in an electromagnetic environment in which radiated RF
disturbances are controlled. The customer or the user of the model CL-R190 can help prevent
electromagnetic interference by maintaining a minimum distance between portable and mobile
RF communications equipment (transmitters) and the model CL-R190 as recommended below,
according to the maximum output power of the communications equipment.
Immunity to proximity elds from following RF wireless communication equipment has been
conrmed:
Test
frequency
(MHz)
Bandwidtha)
(MHz) Service a) Modulation b) Maximum
power
(W)
Minimum
separation
distance
(m)
IEC/
EN60601
test level
(V/m)
Compliance
level
(V/m)
385 380-390 TETRA400 Pulse
modulation b) 1.8 0.3 27 27
450 430-470 GMRS 460,
FRS 460
FM
±5 kHz
deviation
1 kHz sine
2 0.3 28 28
710
704-787 LTE Band
13, 17
Pulse
modulation b)
217 Hz
0.2 0.3 9 9745
780
810
800-960
GSM 800 /
900,
TETRA
800,
iDEN 820
CDMA 850,
LTE Band 5
Pulse
modulation b)
18 Hz
2 0.3 28 28871
930
1720
1700-1990
GSM 1800;
CDMA
1900;
GSM 1900;
DECT;
LTE Band 1,
3, 4, 25;
UMTS
Pulse
modulation b)
217 Hz
2 0.3 28 281845
1970
2450 2400-2570
Bluetooth,
WLAN,
802.11 b/g/
n,
RFID 2450,
LTE Band 7
Pulse
modulation b)
217 Hz
2 0.3 28 28
5240
5100-5800 WLAN
802.11 a/n
Pulse
modulation b)
217 Hz
0.2 0.3 9 95500
5785
a):For some services, only the uplink frequencies are included.
b):The carrier shall be modulated using a 50 % duty cycle square wave signal.

- 11 - English
The model CL-R190 is intended for use in an electromagnetic environment in which radiated
RF disturbances are controlled. The customer or the user of the model CL-R190 can help
prevent electromagnetic interference by maintaining a minimum distance between portable and
mobile RF communications equipment (transmitters) and the model CL-R190 as recommended
below, according to the maximum output power of the communications equipment.
Rated maximum
output power of
transmitter
W
Separation distance according to frequency of transmitter
m
150 kHz to 80 MHz
d = 1.2
80 MHz to 800 MHz
d = 1.2
800 MHz to 2.7 GHz
d = 2.3
0.01 0.12 0.12 0.23
0.1 0.38 0.38 0.73
1 1.2 1.2 2.3
10 3.8 3.8 7.3
100 12 12 23
For transmitters rated at a maximum output power not listed above, the recommended
separation distance
d in meters (m) can be estimated using the equation applicable to the
frequency of the transmitter, where
P is the maximum output power rating of the transmitter in
watts (W) according to the transmitter manufacturer.
NOTE 1 At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is
a󰀨ected by absorption and reection from structures, objects and people.
Cables used for the test Length
Power cord 1.8 m
DVI cable (DVI - DVI) 1.8 m
DisplayPort cable (DP - DP) 1.8 m
Label
Important Please read the label containing warnings and cautions carefully before use.

Power Cord Important Information
CAUTION: Please use the power cord provided with this monitor in accordance with the
table below. If a power cord is not supplied with this equipment, please contact your sup-
plier. For all other cases, please use a power cord that matches the AC voltage of the
power outlet and has been approved by and complies with the safety standards of your
particular country. When you use this Monitor for medical in North America, you should
use a North America Hospital Grade power cord.
Country EU Japan
Plug Shape or
Standard VDE, Demko, Nemko,
BSI. etc. PSE
Voltage 230 100
NOTE: This product can only be serviced in the country where it was purchased.
This product is operated by the dedicated microcomputer system.
To delete or alter the program could lead to abnormal display.
When this product is controlled by a computer, do not unplug the USB
cable connected to this product.
Connection to IT-Network
・
Connecting to IT-Network could cause unexpected risks.
・
Changing the connection to IT-Network could cause occur new risks.
・
“Changes in the IT-Network” includes “change conguration”, “add
devices”, “detach devices”, and “update devices”.
・
Specify these risks, and execute the risk management.
- 12 -
English
Product security

Explanation of symbols
These following symbols and labels indicate meanings as below.
Caution Mark.
This device complies with the requirements of
the European Medical Device Regulation (EU)
2017/745 (“MDR”)
VCCI Notice (Japan Only)
Indicates the compliance to the Class B
product based on the standard of the Voluntary
Control Council for Interference (VCCI).
Indicates this apparatus must be recycled,
according to the European WEEE directive.
Symbol for "MANUFACTURER"
Symbol for “AUTHORISED REPRESENTATIVE
IN THE EUROPEAN COMMUNITY“
Consult the operating instructions.
AC Input
Standby power
- 13 - English

- 14 -
English
Safety precautions
This manual contains important warnings and information to prevent potential personal
injury and property damage. The symbols and signs used in this manual and their
meanings are as follows.
Symbols
Warning
Indicates a hazard which, if not avoided, could result in death or
serious injury.
Caution
Indicates a hazard which, if not avoided, could result in minor or
moderate personal injury or property damage.
Meanings
Calls your attention to warnings or cautions. This sign may contain a
picture of a specic situation. E.g.) Risk of electric shock
Indicates a banned action. This sign may contain a picture of a specic
situation. E.g.) No disassembly
Indicates you must follow the instructions. This sign may contain a
picture of a specic situation. E.g.) Unplug from the wall outlet.
Other signs
Important Contains very important information. Make sure to read it before use.
Note Contains do's and don'ts.
Provides helpful information.
Indicates reference.

- 15 - English
Warning
Do not disassemble, repair, or alter the monitor. It could cause re, electric
shock, or injury. Servicing of such a monitor may be refused. Or a fee may
be charged even within the warranty period. Ask your dealer for repairs.
Do not continue using the monitor when failure or abnormality is found. It
could cause re or electric shock.
Do not touch or swallow the liquid crystal that may leak from the damaged
panel. It could cause skin irritation. If it gets into the eye, ush the eye with
water and call your doctor. If it adheres to skin or clothes, wash it o󰀨
immediately with water. It contains a stimulating substance.
Do not put anything on top of or over the monitor and the AC adapter. It
could cause the monitor to fail or cause re.
Do not put anything over the cables. It could cause the monitor to fail or
cause re.
Do not handle the monitor with wet hands. It could cause the monitor to fail
or cause electric shock.
If smoke or odor is observed, turn o󰀨 and unplug the monitor immediately.
Continual use could cause re or electric shock. Consult your dealer.
If by accident you drop the monitor or give it a jolt, turn o󰀨 and unplug the
monitor immediately. Continual use could cause re or electric shock.
Consult your dealer.
If liquid or any foreign object enters inside, turn o󰀨 and unplug the monitor
immediately. Continual use could cause re or electric shock. Consult your
dealer.
To avoid a lighting strike, stop using the monitor during thunder. It could
result in electric shock.
Make sure to use the supplied power cable and the AC adapter. The use of
a cable and/or an AC adapter other than supplied could cause the monitor to
fail.
The input voltage for this monitor is limited to AC 100 V to AC 240 V. Do not
use it at any other voltage. Failure to do so could cause the monitor to fail or
cause re.
The monitor must be grounded. Failure to do so could cause electric shock.
When using a 2P plug, ground the monitor before plugging into a wall outlet.
To remove the grounding cable, unplug the monitor rst.

- 16 -
English
Follow the instructions below in handling the power plug.
• Hold the plug when unplugging. Pulling the cord could cause damage and
result in re or electric shock.
• Do not plug/unplug with wet hands. It could cause electric re.
• Dust the plug periodically and keep it dust-free to avoid re or electric
shock.
• Do not overload wall outlets. It could cause re or electric shock.
• Do not put things around the monitor. Keep enough space around for easy
access to the plug.
Turn o󰀨 and unplug the monitor and its peripheral devices when installing,
uninstalling, and/or moving the monitor.
This monitor and its components come in plastic bags. Keep out of reach of
children. Playing with plastic bags could cause su󰀨ocation.
Caution
Install the monitor indoors. It is not designed for the use outdoors or aboard
vehicles.
Do not put the monitor in a stu󰀨y, dusty, humid place. Do not expose it to oily
smoke or steam. It could cause the monitor to fail and cause re or electric
shock.
Do not put the monitor on an unstable surface. It could cause the monitor to
fall and result in injury.
Do not expose the monitor to direct sunlight. It could damage the cabinet or
other parts and result in overheat or re.
Avoid a place subject to
• Magnetic elds • Vibrations
• Corrosive gases • Electrostatic charge
It could cause the monitor to fail.
Do not use the monitor with condensation on the surface. It could cause the
monitor to fail. Condensation forms when the monitor is moved into a warm
room from a cold place. Let it sit until it goes away.
Do not place the monitor on its back or use in a place with little ventilation.
Heat could build up and damage the cabinet and/or the inner parts. It could
result in shortening of life, overheat, and/or re.
Rest your eyes for 10 to 15 minutes per hour. Failure to do so could cause
eyestrain.
Disconnect the power cord if abnormalities such as smoke and re, etc. are
observed. Do not position the monitor so that it is di󰀩cult to operate the
disconnection.

- 17 - English
This product can be reused only if it is reconditioned under our responsibility.
Please report to us and the authority of the member state if in any serious
incident that has occurred in relation this product.
Even if it is used properly, the monitor may cause harmful interference to
radio or television reception. Try the following measures to correct it.
• Increase the distance between the monitor and the radio/TV.
• Connect the monitor into a di󰀨erent outlet from the one to which the radio/
TV is connected.
Do not press, scratch, or put objects on the LCD panel surface. It could
cause monitor noise and/or cause the panel to fail.
Do not monitor a static image for too long. It could cause "ghosting," a
phenomenon where the previous image displayed on the screen is seen for
moments after the image has changed.
Turn on a screen saver or enable the standby mode to avoid "burning in,"
the burning of an image onto the LCD panel after hours of the same image
being displayed.
Please be advised that the following symptoms may occur due to the nature
of LCDs. They are not failures.
• During use in cold environments, "streaking" may occur or images may
appear dark.
• Depending on use conditions such as temperature, spots or unevenness in
luminance or color may be observed.
• Due to the manufacturing technology used, there may be pixel or dot
failures even though its rate of e󰀨ective pixels is 99.999758 %.
Do not set maximum luminance or closer to it when using the monitor in a
dim room below 100 lx. It could cause eyestrain. We recommend the factory
default. Setting it too low could make it hard to see the image.
Clean inside of the monitor once a year. The dust could cause re.
Ask your dealer for maintenance.
LCD

- 18 -
English
Package contents
Please check if the following items are included in this product package. If any item is
missing, contact your dealer for replacement.
Note Don’t use the power cord packaged with this product for other electronics.
□Monitor □ Power cord ( 2P: For Europe:1.8m)
□DVI cable (DVI - DVI) (1.8 m) □DisplayPort Cable (1.8m)
□AC Adapter(Delta MDS-060AAS12B) □USB Cable (1.8m)
Keep the original box and packing material to pack the product for
shipping.
□Instruction manual (This document)

- 19 - English
Features
● 19.0 inch LCD screen supporting up to SXGA resolutions
This color LCD supports VESA standard display modes from VGA 640 x 480 to SXGA
1280 x 1024 resolutions.
● High luminance, high contrast, LED backlight
The LCD panel has a maximum luminance of 250 cd/m2typ.,
factory default: Calibration1(150 cd/m2 Gamma: DICOM GSDF, 6500K white point),
a contrast ratio of 1000:1 typ., and a super-wide viewing angle of 178° typ. (contrast
ratio ≥ 10:1) horizontal and vertical.
Realized the power saving by the LED backlight.
● DICOM GSDF Calibration capability.
Combination with our calibration application software which is included separately
provided calibration kit, this monitor can calibrate into user desirable brightness,
gamma value and color balance via implemented USB communication port.
● Multiple interfaces
CL-R190 is compatible with both analog (VGA) and digital (DVI, DisplayPort) inputs.
● User-friendly OSD controls and control button
The OSD adjustments are achieved only by front buttons. The OSD control panel has
easy-to-understand icons for quick and easy operation.
● Power save function
The power save function puts the monitor in power save mode when a sync or input
signal is lost and reduces power consumption below 1W.

Names and functions of parts
①: “Auto” button
In the VGA input mode, Press the button to run AUTO function.
②: “Input” button
Press the button to select the input signal.
③: “-” buttons
Press the button “-” to down (or decrease the adjustment value) in the OSD menu.
④: “+” buttons
Press the button “+” to up (or increase the adjustment value) in the OSD menu.
⑤: “Menu” button
To access the OSD* control panel, press the menu button when the monitor turned
on.
* OSD (On-Screen Display): A function that displays information on the screen. With
the OSD control panel shown, press the menu button to execute the selected menu
item or to display sub menu items.
⑥: Standby power button
Press the button to turn ON or turn OFF the monitor.
①②③④⑤⑥⑦
- 20 -
English