JVC VN-T16U User manual

LST1363-001C
HD IP CAMERA
VN-T16U INSTRUCTIONS
Thank you for purchasing this product.
Before operating this unit, please read the "INSTRUCTIONS", "QUICK
GUIDE" and "SAFETY PRECAUTIONS" carefully to ensure the best
possible performance.

1
Contents
Contents of this manual...................................................................................... 2
Cautions and Warnings...................................................................................... 2
FCC Compliance Statement............................................................................... 3
AVC and MPEG-4 Visual Patent Portfolio License............................................. 4
AVC Patent Portfolio License ....................................................................... 4
MPEG-4 Visual Patent Portfolio License...................................................... 4
1About This Document ................................................................................................. 5
Overview of Contents......................................................................................... 5
2Product Overview........................................................................................................ 6
Camera Parts and Definitions............................................................................. 6
Camera Overview......................................................................................... 6
Camera Parts and Definitions....................................................................... 6
3Installation and Connections....................................................................................... 8
Before You Begin ............................................................................................... 8
Unpack Everything ............................................................................................. 8
Equipment Required........................................................................................... 8
Operating Precautions........................................................................................ 8
Camera Installation........................................................................................... 10
Checking Unpacked Camera...................................................................... 10
Mounting..................................................................................................... 10
Network Camera Diagram................................................................................ 11
Hardware and Software Requirements....................................................... 11
Connecting the Camera to a Personal Computer............................................. 12
Setting IP.................................................................................................... 12
Connecting the Camera to a Personal Computer....................................... 12
4Overview of Navigation and Controls........................................................................ 16
Live View.......................................................................................................... 16
Image Parameters............................................................................................ 17
Basic........................................................................................................... 17
Compression .............................................................................................. 21
Alarm.......................................................................................................... 29
SD Recording............................................................................................. 30
E-mail Notification....................................................................................... 32
Audio .......................................................................................................... 34
Network Settings .............................................................................................. 36
Basic........................................................................................................... 36
FTP Server................................................................................................. 37
RTSP.......................................................................................................... 37
Https........................................................................................................... 39
ONVIF......................................................................................................... 39
Admin Function................................................................................................. 40
Administrator .............................................................................................. 40
User List ..................................................................................................... 40
Date/Time................................................................................................... 41
Update........................................................................................................ 42
Configuration.............................................................................................. 42
Event Log ......................................................................................................... 44
Information........................................................................................................ 44
Miscellaneous................................................................................................... 45
5Specifications............................................................................................................ 53

2
Contents of this manual
Windows, Internet Explorer, DirectX and FAT32 are registered trademarks
of Microsoft Corporation in the U.S.
Pentium is a registered trademark of Intel Corporation in the U.S.
NVIDIA and GeForce are trademarks or registered trademarks of NVIDIA
Corporation in the U.S.
AMD, ATI and Radeon are trademarks of Advanced Micro Devices Inc. in
the U.S.
Product names of other companies described in this manual are trade-
marks or registered trademarks of the respective companies. Symbols
such as ™, ® and © are omitted in this manual.
Design, specifications and other contents described in this manual are
subject to change for improvements without prior notice.
Cautions and Warnings
Installation and servicing should be performed only by qualified and experi-
enced technicians to conform to all local codes and to maintain your warranty.
DC12V /AC 24V models require the use of CSA Cer-
tified/UL Listed Class 2 power adapters to ensure
compliance with electrical safety standards. Power
over Ethernet (PoE) should meet the IEEE802.3af
PoE standards.
This product is intended to be supplied by a Listed Direct Plug-In Power Unit
marked "Class 2" or Listed Adapter marked "L.P.S." (or "Limited Power
Source") or PoE and rated output DC 12V, 0.55A minimum or AC 24V, 60Hz,
0.55A minimum or 48Vdc, 0.13A minimum. (for USA)
WEEE (Waste Electrical and Electronic Equipment).
Correct disposal of this product (applicable in the European
Union and other European countries with separate collec-
tion systems). This product should be disposed of, at the
end of its useful life, as per applicable local laws, regula-
tions, and procedures.

3
Caution
Connect only one camera to the power line,
AC24V/DC12V. Do not share the power line with other
equipment. The power cable between power source and
the camera must be under 3 m.
Caution
When powering the camera from AC24V, a UPS source
should be considered to ensure satisfactory performance.
FCC Compliance Statement
Information to the user: This equipment has been tested and found to com-
ply with the limits for a Class A digital device, Pursuant to Part 15 of the FCC
Rules; these limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to
radio communications. However, there is no guarantee that interference will
not occur in a particular installation.
If this equipment does cause harmful interference to radio or television recep-
tion, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference. For example, try reorienting or
relocating the receiving antenna, increasing the separation between the
equipment and receiver, or connecting the equipment to an outlet on a dif-
ferent circuit.
Caution
Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to
operate the equipment.
This Class A digital apparatus complies with Canadian ICES-003.

4
AVC and MPEG-4 Visual Patent Portfolio License
AVC Patent Portfolio License
THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO
LICENSE FOR THE PERSONAL USE OF A CONSUMER OR OTHER USES
IN WHICH IT DOES NOT RECEIVE REMUNERATION TO (i) ENCODE
VIDEO IN COMPLIANCE WITH THE AVC STANDARD ("AVC VIDEO")
AND/OR (ii) DECODE AVC VIDEO THAT WAS ENCODED BY A CON-
SUMER ENGAGED IN A PERSONAL ACTIVITY AND/OR WAS OBTAINED
FROM A VIDEO PROVIDER LICENSED TO PROVIDE AVC VIDEO. NO
LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE.
ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA, L.L.C.
SEE HTTP://WWW.MPEGLA.COM.
MPEG-4 Visual Patent Portfolio License
THIS PRODUCT IS LICENSED UNDER THE MPEG-4 VISUAL PATENT
PORTFOLIO LICENSE FOR THE PERSONAL AND NON-COMMERCIAL
USE OF A CONSUMER FOR (i) ENCODING VIDEO IN COMPLIANCE WITH
THE MPEG-4 VISUAL STANDARD ("MPEG-4 VIDEO") AND/OR (ii) DE-
CODING MPEG-4 VIDEO THAT WAS ENCODED BY A CONSUMER EN-
GAGED IN A PERSONAL AND NON-COMMERCIAL ACTIVITY AND/OR
WAS OBTAINED FROM A VIDEO PROVIDER LICENSED BY MPEG LA TO
PROVIDE MPEG-4 VIDEO. NO LICENSE IS GRANTED OR SHALL BE IM-
PLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION INCLUDING
THAT RELATING TO PROMOTIONAL, INTERNAL AND COMMERCIAL
USES AND LICENSING MAY BE OBTAINED FROM MPEG LA,LLC. SEE
HTTP://WWW.MPEGLA.COM.

5
1 About This Document
This INSTRUCTIONS is designed to be a reference tool for the installation and
operation your system including the camera’s features, functions and detailed
explanation of the menu tree.
Overview of Contents
This document contains the following chapters:
Chapter 2, Product Overview, introduces the main functions and system
requirements of the camera.
Chapter 3, Installation and Connections, provides detailed instructions on
installing the camera and connecting wires.
Chapter 4, Overview of Navigation and Controls, introduces how to navi-
gate in the main menu window and operate the controls.

6
2 Product Overview
Camera Parts and Definitions
Camera Overview
Camera Parts and Definitions
3
2
Lens is not provided.
1
Safety Wire(Fall Prevention
Wire, not provided)

7
1. CS mount: connect the lens with the camera
2. Screw: lock Back focus Adjustment
3. Back focus Adjustment
4. Base: connect the camera with the tripod
5. SD card slot: insert a SD card into this slot for recording and storage
6. Video: not supported (for factory use only)
7. RJ45 Ethernet Connector/ PoE: insert the RJ45 cable for network con-
nection. It also supports PoE (Power over Ethernet).
8. Default Button: reset all of the camera parameters to factory default by
pressing for 5 seconds.
9. Reset Button: restart the system.
10. Power Indicator: Red light indicates power connection.
11. I/O Connector: Input / Output Connector
12. Power Terminal
Note
Connectors and field wiring terminals for external Class 2
circuits provided with marking indicating minimum Class of
wiring to be used. Class 2 shall be marked adjacent to the
field wiring terminals
A/I
Audio in
GND
A/O
Audio out
GND
AO
Alarm out
COM
AI
Alarm in
GND
4

8
3 Installation and Connections
This chapter describes the installation and connection of the Box Camera.
Before You Begin
Please read this INSTRUCTIONS carefully before you install and operate the
camera.
Unpack Everything
HD IP Camera
WARRANTY CARD
SAFETY PRECAUTIONS
QUICK GUIDE
8-PIN TERMINAL BLOCK for alarm input/output
CD-ROM containing INSTRUCTIONS and IP Finder software
Equipment Required
The following tools might help you to complete the installation:
Drill
Screwdrivers
Wire cutters
Operating Precautions
Do not install the camera in following places.
In a place exposed to rain or moisture.
In a place with vapor or oil, for example in a kitchen.
When the ambient temperature rises above or falls below the acceptable range (from -10°C to
50 °C.
In a place at which corrosive gases are emitted.
Near a source of radiation, X-rays, strong radio waves or magnetism.
In a place subject to vibration.
In a place with excessive dirt.
Maintenance
Wipe the camera with a dry, soft cloth to remove any dirt. Do not use benzene or thinner to wipe the
camera. Doing so may melt the surface or cause it to fog. For tough stains, wipe with a neutral de-
tergent diluted with water, followed by wiping with a dry cloth.

9
Power supply
Please make sure the power source is DC12V / AC24V / PoE. Only connect the camera to this power
system.
When using AC24V power supply, do not connect the AC24V cable to commercial power supply. If it is
connected by mistake, the internal circuit may be damaged. Do not use the camera and make sure to
send it to the nearest JVC dealer for inspection.
Real time clock
The real time clock of the camera will be initialized by power off over 3 days. In such case,please set da-
ta/time manually, or set NTP server. If the real time clock is initialized, event log, data in SD card, and mail
sent by the camera do not show correct time.
SD card
SD card is fragile and not reliable for long term use. Our company will not be liable for damages resulting
from the use of SD card. Frequent back up of data is recommended. Data of SD card will be lostby trou-
bles below.
Electrical or Mechanical Shock to SD card.
Poweroff or ejecting of SD card during recording.
Rewriting times exceeds upper limit of the SD card (The upper limit depends on grade of the SD
card.)
Energy Conservation
When the camera is not in use for a long time, turn off the power for safety and energy conservation
reasons.
Copyright Protection
With the exception of the user being the copyright holder or when permission such as for du-
plication has been granted by the copyright holder, permission is required in principle for the
duplication, modification, or transmission of copyrighted material.
Unauthorized duplication, modification, or transmission of copyrighted material may constitute a
copyright infringement, and the user may be liable to compensate for any damages. When using
copyrighted material, be sure to check the license agreement of the copyrighted material thor-
oughly.
When rights or rights holders are involved with regard to the targeted duplicating subject, per-
mission may be required for shooting or using (processing) it. Be sure to check the licensing
conditions thoroughly.
Disclaimer
We will not be responsible for any inconveniences or disturbances caused in the event of privacy invasion
as a result of camera footages of this product.
Others
Because the camera controls auto exposure by shutter speed, flicker can be shown by fluorescent light.
To reduce the flicker, please select PAL mode if the power is 50Hz, or NTSC mode if the power is 60Hz.
(Refer to INSTRUCTIONS “4 Overview of Navigation and Controls” - “Video Type”).