JVC AV-28BH8EEB User manual
COLOUR TELEVISION
ENGLISH
INSTRUCTIONS
AV-28BH8EEB
AV-28BH8EES
POLSKI
ÈESKY
MAGYAR
ÁÚËÃAPCKÈ
ROMANIAN
BAREVNY TELEVIZOR PØ ÍRUÈKA K OBSLUZE
KOLOROWY ODBIORNIK TELEWIZYJNY INSTRUKCJA OBSLUGI
TELEVIZOR COLOR INSTRUCÞIUNI
ÖBETEH TEËEBÈÇOP PÚKOBOÄCTBO ÇA PAÁOTA
SZÍNES TELEVÍZIÓ HASZNÁLATI UTASÍTÁSA
ENGLISH - 1 -
Safety Precautions
1. Power Source
The receiver should be operated only from a 220-240V AC,
50 Hz. outlet. Ensure you select the correct voltage setting
for your convenience.
2. Power Cord
The power supply cord should be placed so that they are not
likely to be walked on or pinched by items placed upon them
or against them. Pay particular attention to cord where they
enter the plug, power outlet, and the point where they exit
from the receiver.
3. Moisture and Water
o not use this equipment in a humid and damp place (avoid
the bathroom, the sink in the kitchen, and near the washing
machine). o not expose this equipment to rain or water and
do not place objects filled with liquids on it as this may be
dangerous.
4. Cleaning
Before cleaning, unplug the receiver from the main supply
outlet. o not use liquid or aerosol cleaners. Use with soft
and dry cloth.
5. Ventilation
The slots and openings on the receiver are intended for venti-
lation and to ensure reliable operation. To prevent overheating,
these openings must not be blocked or covered in anyway.
6. Lightning
In case of storm and lightning or when going on holiday, dis-
connect the power cord from the wall outlet.
7. eplacement Part
When replacement parts are required, be sure the service
technician has used replacement parts which are specified
by the manufacturer or have the same specifications as the
original one. Unauthorized substitutions may result in fire,
electrical shock, or other hazards.
8. Servicing
Please refer all servicing to qualified personnel. o not re-
move cover as this may result in electric shock.
9. Flame sources
o not place naked flame sources on the apparatus.
10. Stand-By
o not leave your TV stand-by or operating condition when you
leave your house.
Warning!
Any intervention contrary to regulations, in particular, any
modification of high voltage or a replacement of the picture
tube may lead to an increased concentration of x-rays. Any
television modified in this way no longer complies with license
and must not be operated.
Instructions for waste disposal:
Packaging and packaging aids are recyclable and should
principally be recycled. Packaging materials, such as foil
bag, must be kept away from children.
Batteries, including those which are heavy metal-free, should
not be disposed of with household waste. Please dispose of
used batteries in an environmentally sound manner. Find out
about the legal regulations which apply in your area.
Contents
Safety Precautions ................................................... 1
Remote Control Buttons .......................................... 2
Control Panel Buttons .............................................. 3
Antenna Connections ............................................... 3
Preparation ................................................................ 4
Before Switching on your T ..................................4
Power connection............................................................. 4
Aerial Connections ........................................................... 4
How to connect the external equipments .......................... 4
Inserting batteries in the remote control handset .............. 4
Switching the T ON/OFF ........................................ 4
To switch the TV on.......................................................... 4
To switch the TV off .......................................................... 4
Initial Settings ........................................................... 4
Operating with the onset buttons ...................................... 5
Operating with Remote Control ......................................... 5
Menu System ............................................................. 5
Sound Menu..................................................................... 5
Picture Menu ................................................................... 6
Feature Menu ................................................................... 7
Installation Menu .............................................................. 7
Other Features........................................................ 10
Sound Mute ....................................................................10
Stereo / Bilingual ............................................................. 10
Information on Screen ..................................................... 10
VCR / V Control Buttons and VCR / / V Switch 10
Teletext .................................................................... 10
To operate Teletext .......................................................... 10
To select a page of Teletext ............................................. 11
To Select Index Page ...................................................... 11
Searching for a teletext page while watching TV .............. 11
To Select ouble Height Text .......................................... 11
To Reveal concealed Information ................................... 11
To Stop Automatic Page Change ..................................... 11
To Select a Subcode Page .............................................. 11
To exit Teletext ................................................................ 11
Fastext and Toptext ........................................................ 11
Connect the External Equipments ........................ 12
Via the Euroconnector..................................................... 13
EXT 2 S Mode ................................................................. 13
Via the RCA jacks ........................................................... 13
Via the ANT (aerial) socket.............................................. 13
TV and Video Recoder (VCR) ..........................................13
NTSC Playback .............................................................. 13
Copy Facility ...................................................................13
Connecting Headphones ................................................. 13
Tips........................................................................... 13
Specifications .......................................................... 14
01-ENG&EE-DK-41-AV28BH8.p65 20.09.2002, 13:571
ENGLISH - 2 -
= Stand By / Power
0 - 9 = irect Program
Colour Buttons
Standard Button
( ) = Programme Up (Cursor Up)
MENU = Menu Button
( ) = Cursor Right / Volume +
Teletext / VCR / V Control Buttons
= VCR / / V Switch
= Stereo / Bilingual Button
= Information Button
( ) = Programme own (Cursor own)
( ) = Cursor Left / Volume -
AV = AV Button
= Teletext Button
= Mute
Remote Control Buttons
9&5
'9'
3
$9 0( 18
3
67$1'$5'
79
CAUTION
RISK OF ELECTRIC SHOCK
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of
uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk
of electric shock of persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating
and maintenance (servicing) instructions in the literature accompanying the appliance.
01-ENG&EE-DK-41-AV28BH8.p65 20.09.2002, 13:572
ENGLISH - 3 -
Control Panel Buttons
Antenna Connections
01-ENG&EE-DK-41-AV28BH8.p65 20.09.2002, 13:573
ENGLISH - 4 -
Preparation
Place TV on a solid surface.
For ventilation, leave a space of at least 10 cm free all around
the set. To prevent any fault and unsafe situations, please do
not place any objects on top of the set.
Use this apparatus in tropical and/or moderate climates.
Before Switching on your TV
Power connection
Impor an : The TV set is designed to operate on 220-240 V
AC, 50 Hz.
After unpacking, allow the TV set to reach the ambient room
temperature before you connect the set to the mains.
Aerial Connections
Connect the aerial plug to the aerial input socket located at
the back of the TV.
How to connect the external equipments
See Connec he Ex ernal Equipmen s on page 12.
See the instruction manuals provided with the external de-
vices too.
Inserting batteries in the remote control handset
Remove the battery cover located on the back of the hand-
set by gently pulling upwards from the indicated part.
Insert two AAA (R03) or equivalent type batteries inside.
Replace the battery cover.
NOTE: Remove batteries from remote control handset when it is
not to be used for a long period. Otherwise it can be damaged
due to any leakage of batteries.
Switching the TV ON OFF
You can operate your TV either using the remote control
handset or directly using the TV onset buttons.
To switch the TV on
Your TV will switch on in two steps:
1- Press the power button located on the front of the TV. Then
the TV switches itself to standby mode and the RED LED
located below the TV turns on.
2- To switch on the TV from stand-by mode either:
Press a digit button on the remote control so that a program-
me number is selected,
or,
Press Standby / Power Button or Programme Up and own
buttons on the front of the TV or on the remote control re-
spectively, so the TV will switch on and the RED Led will turn
GREEN.
IMPORTANT:
f no aerial signal is received at the selected program for a
period of 5 minutes then your TV automatically switches
into stand-by mode.
To switch the TV off
Press the stand-by button on the remote control, so the TV
will switch to stand-by mode and the GREEN LED will be-
come RED, or,
Press the power button located on the front of the TV.
NOTE: If you have switched of the TV set from the power but-
ton instead of the remote control, next time you press the
power button, the TV set will switch on without going to the
stand-by mode.
Initial Settings
When the TV is first turned on, it enters the initial setting
mode, and the AUTOSTORE menu is displayed. Follow the
instructions below to do the initial settings.
The AUTOSTORE menu does not appear when your TV has
been turned on once. In this case, use the "LANGUAGE",
"COUNTRY" and "AUTOSTORE" items in the INSTALL
menu to make the initial settings. For details, see "Ins alla-
ion Menu" on page 7.
If you want to do the initial settings later, press STANDARD
button to turn the menu off.
1. Press " " or " " button to select "LANGUAGE"
item. Then press the or button to enter the "LAN-
GUAGE" sub-menu.
2. Press " " or " " button to select a language. Then
press the or button to store it.
3. Press the MENU button to return to the AUTOSTORE
menu.
4. Press " " or " " button to select "COUNTRY" item.
Then press the or button to enter the "COUNTRY"
sub-menu.
01-ENG&EE-DK-41-AV28BH8.p65 20.09.2002, 13:574
ENGLISH - 5 -
5. Press " " or " " button to select the country where
you are now located. Then press the or button to
store it.
6. Press the MENU button to return to the AUTOSTORE
menu.
7. Press " " or " " button to select "Con inue" item.
Then press button to start the AUTOSTORE function.
The AUTOSTORE function automatically stores the re-
ceived channels in your TV's programme numbers.
After the AUTOSTORE function is finalized, "PROGRAM"
menu appears. You can delete a channel or swap two
channel numbers. For details, see "Program Menu" on
page 9.
8. Press the STANDARD button to complete the initial set-
tings.
If a channel you want to view is not stored, store it using
the TUNING menu. For details, see "Tuning Menu" on
page 8.
Operating with the onset buttons
Volume setting and programme selection can be made using
the buttons on the front panel.
Volume Se ing
Press - button to decrease volume or + button to
increase volume, so a volume level scale will be displayed
on the screen.
Programme Selec ing
Press P button to select next programme or P but-
ton to select the previous programme.
En ering Main Menu
Press MENU button to enter main menu. In the main
menu select submenu using P or P button and en-
ter the submenu using + or - button. To learn the
usage of the menus, refer to the Menu Sys em section of
this manual.
Operating with emote Control
The remote control handset of your TV is designed to control
all the functions of the model you selected. The functions will
be described in accordance with the menu system of your
TV.
Functions which you can use out of menu system are de-
scribed below.
Volume Se ing
Press button to increase volume.
Press button to decrease volume.
Programme Selec ing
(Previous or nex programme)
Press button to select the previous programme.
Press button to select the next programme.
Programme Selec ing (direc access):
Press digit buttons on the remote control handset to select
programmes between 0 and 9. TV will switch to the selected
program after a short delay.
For a two or three digit program number enter the second or
third digit after pressing the first digit within 2 seconds.
Menu System
Your TV has been designed with a menu system. isplay
MENU (main menu) and enter one of four menus (SOUND,
PICTURE, INSTALL and FEATURE).
1- Press MENU button to display MENU (main menu).
The menu titles will be displayed in the main menu.
2- Press or button to select a menu title, then
press or button to enter the menu.
To exit a menu, press STANDARD button.
To go to the previous menu, press MENU button.
Sound Menu
To change sound settings
Press MENU button, now you are in main menu. In the
main menu, select SOUND using or button,
then enter the sound menu pressing or button.
Setting olume:
Using or button to select Volume.
Press button to increase volume.
Press button to decrease volume.
01-ENG&EE-DK-41-AV28BH8.p65 20.09.2002, 13:575
ENGLISH - 6 -
Setting Balance:
Using or button select Balance.
Press button to change balance rightward.
Press button to change balance leftward.
Equalizer
You can enter Equalizer menu by using or button after
selecting this item in sound menu.
You can also select between the following modes: Fla , pop,
rock, jazz, classic and user using he or button.
When you come to user, press button to select the 120Hz
item first. Using or button adjust the level and
then press button to adjust the levels of other frequen-
cies. When you press menu or standard button, the changes
will be stored in the user item automatically.
Effect:
You can use this feature to switch on and off sound effect.
Pressing or button will turn on and off this feature. If
the current sound system is MONO and the sound effect is
set ON, then the sound will be heard as if it is STEREO. If
the current sound system is STEREO, switching this effect
on will make the sound deeper. Switching it off will make no
change in MONO and STEREO.
Picture Menu
To change picture settings:
Press MENU button, now you are in main menu. In the
main menu, select PICTURE using or button,
then enter the picture menu pressing or button.
You can change the values of this items firstly by selecting
the item by or button and then by using or
button. The PICTURE menu disappears and level indica-
tors are displayed while items are changed. The PICTURE
menu is restored after adjustment is finished.
You can change the Brigh ness by or button after
selecting this item.
You can change the Con ras by or button after se-
lecting this item.
You can change the Colour by or button after select-
ing this item.
You can change the Sharpness by or button after
selecting this item.
You can adjust the Tin item as normal, warm and cool. Us-
ing or button toggle between these three settings.
01-ENG&EE-DK-41-AV28BH8.p65 20.09.2002, 13:576
ENGLISH - 7 -
The Noise reduc ion can be adjusted in four different lev-
els: Minumum, Medium, Maximum and Au o. Addition-
ally it can be cancelled by selecting the OFF option. Press-
ing or button toggles between these five settings.
The Pic ure Mode can be three different modes: Auto, 4:3
or 16:9 modes. Using or button toggle between these
different screen formats.
The Picture Mode can be stored for all channels (200 chan-
nels) individually.
You can change the Hue for NTSC systems by or
button after selecting this item. A level indicator for Hue is
displayed while changing this item. The Hue bar is dis-
played while an NTSC signal is input from the EXT 1, EXT 2
or F AV (Fron AV) terminal.
Recalling Factory settings.
You can re-set the current PICTURE menu settings (except
Noise Reduc ion, Pic ure Mode and Tin settings) to the
default settings.
Press STANDARD button when no menu appears.
Feature Menu
Press MENU button, now you are in main menu. In the
main menu, select FEATURE, using or button.
Then enter the feature menu pressing or button.
Sleep timer
The sleep timer is used to turn the TV off after a defined peri-
od. Press or button to choose a priod of time after se-
lecting this item. The timer can be programmed between Off
and 120 minutes in steps of 10 minutes. One minute before
the "Sleep imer" function turns the TV off, the remaining
time will be displayed.
Child lock
You can disable the control panel buttons (except the POW-
ER button) with this item.
Press or button to change the setting to ON or OFF
after selecting this item.
When you set this item to ON, the TV can be operated only
by using the remote control handset.
Setting External Source Output
You can use this menu to select the internal or external
source that will be output at EXT 2 terminal.
In the FEATURE menu select EXT2 Ou pu using
or button. Then select the source you want to be out-
put at EXT 2 pressing or button (one of the sources:
TV, EXT 1 or F AV (Fron AV).
Installation Menu
Press MENU button, now you are in main menu. In the
main menu, select INSTALL, using or button.
Then enter the INSTALL menu pressing or button.
Menu Language Selection
Press the or button to select LANGUAGE
item.
Press or button to enter LANGUAGE sub-menu.
Press or button to select the desired menu lan-
guage:
After selecting the menu language press or button to
store the selected language.
Press MENU button to the upper menu or press STAN-
DARD button to turn the menu off.
Country Selection
Press the or button to select the COUNTRY
item.
Press or button to enter the COUNTRY sub-menu.
01-ENG&EE-DK-41-AV28BH8.p65 20.09.2002, 13:577
ENGLISH - 8 -
Press or button to select the desired country
settings:
After selecting the country, press the or button to
store the selected country.
Press MENU key to go to the upper menu or press the
STANDARD button to turn the menu off.
Tuning Menu
You can store a channel manually, or modify the current set-
tings of a channel (for example, changing the channel name).
If you want to modify the current settings of a channel, select
the channel of which you want to modify the setting. Then
display the main menu on the screen.
Press or button to select "TUNING" item.
Press or button to enter the "TUNING" sub-menu.
Press or button to select an item in the "TUN-
ING" menu. Then press or button to change the set-
ting.
For details of each item, see the explanations below.
After all settings of a channel are completed, press
or button to select "Programme" item. Then press
or button to select a programme number which you
want to store the setting.
Press or button to select "S ore" item. Then
press or button to store the setting.
The "STORED" appears at the bottom of the menu for 3
second.
Press the MENU button to go to the upper menu, or press
the "S andard" button to turn the menu off.
In an AV mode, you can change only the "Mode" / Colour
sys em setting.
Search:
You can search a channel manually.
Select "Search" item. Then press or button to start
searching. "SEARCHING" is displayed while the TV is
searching a channel.
Searching stops when the TV finds a channel. Then the
channel is displayed.
Press or button repeatedly until the channel you want
appears.
When you cannot search a channel you want, select the
"S andard" item and select other broadcasting system.
Then start searching again.
Standard:
If you cannot hear the normal sound even when the picture
appears normally, select the correct broadcasting system to
hear the sound normally.
Select "S andard" item. Then press or button to se-
lect a broadcasting system.
Colour system:
If the picture is not clear or no colour appears, select the
correct colour system to display the picture normally.
Select "Colour sys em" item. Then press or button
to select a colour system.
and, Channel:
If you know a channel number, you can find it directly by
entering the channel number.
Select the "Band" item. Then press or button to se-
lect the band (C or S) where the channel you want is lo-
cated.
Select the "Channel" item. Then press or button to
select the channel number, or enter the channel number
with the digit buttons.
The available channel numbers differ depending on your
"COUNTRY" and "S andard" settings.
Fine tuning:
If the channel reception is poor, fine-tune the channel.
Select "Fine uning" item. Then press or button to
fine -tune the channel.
Name:
You can store the channel name or change it.
01-ENG&EE-DK-41-AV28BH8.p65 20.09.2002, 13:578
ENGLISH - 9 -
Select "Name" item. Then press or button to display
a cursor.
Press or button to select a character and
press or button to move the cursor.
After the name is completed, press the MENU button.
Mode:
Set "Mode" item to "TV" for the TV channels.
When you watch a picture from your VCR and the picture is
unstable, you may improve it by changing the "Mode" set-
ting from "TV" to "VCR".
Program Menu
In order to edit the program list you should enter PROGRAM
menu.
Select PROGRAM item in the INSTALL menu, then press
or button to enter the PROGRAM menu. You can change
and delete the programs on the list, according to your order
preference. The following menu will appear:
You can select the programs in the program list by pressing
, or , button on the remote control.
Whenever you select a program from the list, colour of the
selected program item will change and this program will be
displayed on the screen.
Change
First select the program you want to change by using ,
or , buttons as described above for move item.
Press Blue button, colour of program name in the list you
preselected become blue.
Now using , or , button select the second
program in the list which you want to exchange with the previ-
ously selected program.
Press Blue button again, so the previously and the second
selected program will be exchanged.
Delete
First select the program you want to delete by using ,
or , button. After program is selected press Red
button.
The selected program will be removed from the program list
and the list will shift one step upwards at the position of de-
leted program.
Autostore Menu
After the MENU language and Country selections, the AU-
TOSTORE function is ready to start. Select the AUTO-
STORE item in the INSTALL menu, then press or
button to enter the AUTOSTORE menu.
A warning message All prestored programmes will be
erased! appears in a message box.
To start AUTOSTORE press button. Firstly all programs
will be cleared. Then Preset installation will take place stor-
ing the available channels. Finally the sorting order of pro-
grams which depends on selected country and menu lan-
guage settings will start.
To cancel AUTOSTORE press STANDARD button. The op-
eration will be cancelled and TV will restore to normal opera-
tion mode.
After the AUTOSTORE function is finalized, "PROGRAM"
menu appears.
01-ENG&EE-DK-41-AV28BH8.p65 20.09.2002, 13:579
ENGLISH - 10 -
Other Features
Sound Mute
To cut off the sound of the TV press button. The sound
will be cut off. To cancel mute, press or or but-
ton. The volume level will be the same as the level before
mute if you cancel mute pressing button again.
Stereo / Bilingual
If the TV channel you are watching broadcasts in two lan-
guages (e.g. Eurosport), you can select the dubbed or the
original language, pressing the button.
When the stereo broadcast is received poorly, you can
change from stereo to mono sound so that you can hear the
broadcast more clearly and easily.
Information on Screen
First pressing the button displays the current status
Programme number, S a ion name and Sound s a-
us.
Pressing this button again displays the current time.
Pressing this button once more remove the on-screen dis-
play.
To Display the Time
While watching a TV programme with Teletext transmission
press button twice. The current time information, cap-
tured from Teletext will be displayed at the upper left corner
of the screen.
If the programme being watched does not have Teletext
transmission, no time information will be displayed.
The time information will disappear after pressing but-
ton again.
Standard
You can re-set the current PICTURE menu settings (except
Noise Reduc ion, Pic ure Mode and Tin settings) to the
default settings.
Press STANDARD button when no menu appears.
VC / DVD Control Buttons and VC / / DVD
Switch
The buttons can be used to operate a JVC brand VCR or
V player. Pressing the button having the same appearance
as the original remote control button of a device makes the
function work in the same way as the original remote control.
1. Set the VCR / / V Switch to the VCR or V posi-
tion.
VCR:
When you are operating the VCR, set the switch to the VCR
position.
DVD:
When you are operating the V player, set the switch to the
V position.
(Tex ):
When you are viewing Teletext programmes, set the switch to
the (Text) position.
2. Press the VCR / V Control Button to control your VCR
or V player.
No e:
If your device is not made by JVC, these buttons cannot be
used.
Even if your device is made by JVC, some of these buttons
or any one of the buttons may not work, depending on the
device.
You can use the / buttons to choose a TV channel
which the VCR will receive or choose the chapter which the
V player plays back.
Some V player models use the / buttons for operat-
ing of Fast forward/backward functions and choosing the
chapter. In this case, the / the buttons do not
work.
Teletext
Teletext is an information system that displays text on your
TV screen. Using the Teletext information system you can
view a page of information on a subject that is available in the
list of contents (index).
No on screen display will be available in text mode.
While no teletext information available in the selected pro-
gramme, if you press (teletext) button,'No Teletext
Transmission' warning appears at the center of the screen.
No contrast, brightness or colour control, but volume control
is available in text mode.
To operate Teletext
Select a TV station on which Teletext is being transmitted.
Press (teletext) button. Usually the list of contents (in-
dex) is displayed on the screen.
Set the VCR / / V switch to the (Text) position.
01-ENG&EE-DK-41-AV28BH8.p65 20.09.2002, 13:5710
ENGLISH - 11 -
To select a page of Teletext
Press the appropriate digit buttons for the required Teletext
page number.
The selected page number is displayed at the top left corner
of the screen. The Teletext page counter searches until the
selected page number is located, so that the desired page is
displayed on the screen.
Press button to move the Teletext screen forward
one page at a time.
Press button to move the Teletext screen backward
one page at a time.
To Select Index Page
To select the page number of the index (generally page
100), press button.
Searching for a teletext page while watching TV
In the Teletext mode pressing button will switch the
screen to the TV mode. In the TV mode enter a page num-
ber using digit buttons. As you enter last digit of page num-
ber, sign will replace the page number and flash until
the entered page number is found. Then the page number
will replace sign again. Now you can display this tele-
text page pressing button.
To Select Double Height Text
Press button for the top half of the information page to
be displayed in double height text.
Press button again for the bottom half of the informa-
tion page to be displayed in double height text.
Press button once more for the full page of normal
height text.
To eveal concealed Information
Pressing button once will reveal answers on a quiz or
games page.
Pressing button again will conceal the revealed an-
swers.
To Stop Automatic Page Change
The teletext page you have selected may contain more infor-
mation than what is on the screen; the rest of the information
will be displayed after a period of time.
Press button to stop the automatic page change.
Press button again to allow the next page to be dis-
played.
To Select a Subcode Page
Subcode pages are subsections of long Teletext pages that
can only be displayed on the screen one section at a time.
Select the required Teletext page.
Press button.
Select the required subcode page number by pressing four
digit buttons (e.g. 0001).
If the selected subcode page is not displayed in a short
time, press button. TV programme will be displayed on
the screen.
Teletext page number will be displayed on the upper left cor-
ner of the screen when the selected page is found.
Press button to display the selected Teletext page.
To exit Teletext
Press button. The screen will switch to TV mode.
Fastext and Toptext
Teletext mode will be selected according to transmission au-
tomatically.
Your CTV supports the 8 page Teletext system. When the
page number of any of the 8 pages in memory is entered, the
system will not search for the requested page; instead it will
display the page automatically.
Press button to move the Teletext screen forward
one page at a time.
Press button to move the Teletext screen backward
one page at a time.
For Fastext and Toptext
The subject-heading for the information may have a particular
colour or can be in a form located in a coloured box.
Press an appropriate RED, GREEN, YELLOW or BLUE but-
ton in order to reach the relevant page quickly.
For TOPTEXT
If Toptext transmission is present, colour coded buttons will
appear in status row.
If Toptext transmission is not present, status row will not ap-
pear.
In Toptext mode the or commands will request
the next or previous page respectively. If Toptext transmission
is not available, in case of operation of these commands,
wraparound occurs. For example page 100 appears to be one
greater than page 199.
01-ENG&EE-DK-41-AV28BH8.p65 20.09.2002, 13:5711
ENGLISH - 12 -
28 FRONT AV
Connect the External Equipments
efore connecting anything
Switch off all equipments including the TV.
Read the manuals provided with the equipments.
To selec an AV mode
Pressing "AV" button on the remote control selects one of four AV modes (EXT 1, EXT 2, EXT 2 S and F AV).
To return to the TV mode, repeatedly press AV button.
EXT 1 erminal: Euroconnector (21-pin, SCART)
Video input, Audio L/R inputs and RGB inputs are available.
TV broadcast outputs (Video and Audio L/R) are available.
EXT 2 erminal: Euroconnector (21-pin, SCART)
Video input, S-VI EO (Y/C) input and Audio L/R inputs are available.
Video and Audio L/R outputs are available. (see Se ing Ex ernal Source Ou pu on page 7.)
F AV (Fron AV) erminal: RCA connectors x 3
Video input and Audio L/R inputs are available.
01-ENG&EE-DK-41-AV28BH8.p65 20.09.2002, 13:5712
ENGLISH - 13 -
Via the Euroconnector
Your TV set has two Euroconnector sockets. If you want to
connect equipments (e.g. video recorder, decoder, etc.) which
have Euroconnectors, to your TV, use the EXT 1 or EXT 2
terminals.
EXT 2 S Mode
If the equipment connected to your TV set supports S-Video
(Y/C) output from Euroconnector, you can have a better pic-
ture quality by selecting EXT 2 S mode and connecting your
equipment to the EXT 2 terminal of TV. See your equipment's
booklet to check if your equipment has such feature.
Via the CA jacks
If you have an equipment (such as a Camcorder) which has
the RCA jacks, connect it to the F AV (Fron AV) terminal
with the video and audio cables.
If the epuipment has the mono audio jack, connect it to the
AUDIO-L jack.
Via the ANT (aerial) socket
If your equipment does not have a Euroconnecter or RCA
jacks, connect it to the TV with an aerial cable. For details,
see the manual provided with the equipment.
To store the test signal that comes from the equipment in a
programme number, follow the instructions of "Tuning
menu" on page 8. The programme number 0 is usually
used for the external equipment.
After storing, you can watch images from the equipment by
selecting the programme number which you stored the test
signal.
TV and Video ecoder (VC )
Connect the Video Recorder to the ANT (antenna input)
socket of the TV with the aerial cable.
Connect the Video Recorder to the EXT 1 or EXT 2 terminal
with the SCART cable, or connect it to the F AV (Fron AV)
terminal with the audio and video cables.
When you watch a picture from your VCR and the picture is
unstable, you may improve it by changing the "Mode" set-
ting in the "TUNING" menu. (See the "Tuning Menu" on
page 8.)
NTSC Playback
Connect a NTSC video recorder to a terminal. Then press
AV button to select the corresponding AV mode.
NTSC 3.58/4.43 system is detected automatically in AV
mode.
Copy Facility
You can output the video and audio signals which inputs from
TV, EXT 1, F AV (Fron -AV) terminal to the video recorder
connected to the EXT2 terminal.
To select the output source, see Se ing Ex ernal Source
Ou pu on page 7.
Connecting Headphones
Use the stereo headphone socket of your TV, to connect
headphones. As soon as you connect your headphone to the
headphone socket, TVs loudspeakers will automatically
mute.
Tips
Care of the Screen:
Clean the screen with a slightly damp, soft cloth. o not use
abrasive solvents as they may damage the TV screen coating
layer.
Poor Picture:
Have you selected the correct TV system? Is your TV set or
house aerial located too close to the loudspeakers, non-
earthed audio equipment or neon lights, etc. ?
Mountains or high buildings can cause double pictures or
ghost images. Sometimes you can improve the picture quali-
ty by changing the direction of the aerial.
The picture quality may degrade when two peripherals are
connected to the TV at the same time. In such a case, dis-
connect one of the peripherals.
No Picture:
Is the aerial connected properly? Are the plugs connected
tightly to the aerial socket? Is the aerial cable damaged? Are
suitable plugs used to connect the aerial? If you are in doubt,
consult your dealer.
No Pic ure means that your TV is not receiving any trans-
mission. Have you pressed the correct buttons on the remote
control? Try once more.
Sound:
Sound is coming from only one of the speakers. Is the bal-
ance set to one direction extreme? See SOUND menu.
emote Control:
Your TV no longer responds to the remote control. Press the
STANDARD button on the remote control once more. Per-
haps the batteries are exhausted. If so you can still use the
local buttons at the front of your TV.
Have you selected the wrong menu? Press STANDARD but-
ton to return to TV mode or press MENU button to return to
the previous menu.
No solution:
Switch your TV set off and on. If this does not work, call the
service personnel; never attempt to repair it yourself.
01-ENG&EE-DK-41-AV28BH8.p65 20.09.2002, 13:5713
ENGLISH - 14 -
Specifications
TV BROA CASTING .......................................... PAL SECAM B/G D/K
RECEIVING CHANNELS ..................................... VHF (BAN I/III)
UHF (BAN U)
HYPERBAN
CABLE TV (B/G: S01-S41 / S75-S79 ; D/K: S01-S41)
NUMBER OF PRESET CHANNELS ................... 200
CHANNEL IN ICATOR ........................................ On Screen isplay
RF AERIAL INPUT .............................................. 75 Ohm (unbalanced)
OPERATING VOLTAGE ...................................... 220-240V AC, 50 Hz.
SOUN -MULTIPLEX SYSTEMS .......................... Nicam + German Stereo
PICTURE TUBE .................................................. 28
AU IO OUTPUT POWER
(WRMS.) (%10 TH ) .................................. 2 x 12
POWER CONSUMPTION (W) (max.) .................. 175
IMENSIONS (mm) ................................... AV-28BH8EEB
AV-28BH8EES
........................................................................ 480
L ........................................................................ 770
H ........................................................................ 580
Weight (Kg.) ....................................................... 33,2
01-ENG&EE-DK-41-AV28BH8.p65 20.09.2002, 13:5714
POLSKI - 15 -
rodki ostro¿noci
1. ród³o zasilania
Odbiornik powinien byæ zasilany tylko pr¹dem zmiennym o
napiêciu 220-240 V i czêstotliwoci 50 Hz.. Nale¿y pam-
iêtaæ o wyborze gniazda sieciowego o odpowiednim napiêciu.
2. Przewód zasilania
rzewód zasilania nale¿y u³o¿yæ tak, aby nie mo¿na by³o po
nim chodziæ oraz ¿eby nie uleg³ uszkodzeniu przez przedmi-
oty ustawione na nim lub obok niego. Nale¿y zwracaæ szc-
zególn¹ uwagê na wejcie przewodu do wtyczki, pod³¹czenie
do gniazda sieciowego oraz wyjcie przewodu z odbiornika.
3. Wilgoæ i woda
Nie u¿ywaj odbiornika w wilgotnych lub mokrych miejscach
(nie ustawiaj telewizora w ³azience, blisko zlewu w kuchni lub
obok pralki). Nie wystawiaj odbiornika na dzia³anie deszczu
lub wody i nie umieszczaj na nim ¿adnych przedmiotów
wype³nionych cieczami, poniewa¿ mo¿e to byæ niebezpiec-
zne.
4. Czyszczenie
rzed czyszczeniem wyjmij wtyczkê odbiornika z gniazda
sieciowego. Nie u¿ywaj rodków czyszcz¹cych w p³ynie lub
w aerozolu. U¿ywaj suchej i miêkkiej szmatki.
5. Wentylacja
Szczeliny i otwory w obudowie odbiornika s³u¿¹ do wentylacji
i zapewniaj¹ poprawne dzia³anie urz¹dzenia. Aby zapobiec
przegrzaniu, nie wolno w ¿aden sposób blokowaæ ani zakry-
waæ otworów w obudowie.
6. Wy³adowania at osferyczne
W przypadku burzy i wy³adowañ atmosferycznych lub wy-
jazdu na d³u¿szy czas nale¿y wy³¹czyæ przewód zasilania z
gniazda sieciowego.
7. Czêci za ienne
Jeli zachodzi potrzeba wymiany czêci, dopilnuj, aby pra-
cownik serwisu u¿y³ czêci zamiennych okrelonych przez
producenta lub posiadaj¹cych takie same parametry jak
czêci oryginalne. U¿ycie innych czêci mo¿e spowodowaæ
po¿ar, pora¿enie pr¹dem lub inne zagro¿enia.
8. Serwis
Wszelkie naprawy i czynnoci konserwacyjne nale¿y zlecaæ
wykwalifikowanym pracownikom serwisu. Nie zdejmuj pokry-
wy, poniewa¿ grozi to pora¿eniem pr¹dem.
9. ród³a ognia
Nie umieszczaj ods³oniêtych róde³ ognia na odbiorniku.
10. Tryb oczekiwania
Nie pozostawiaj telewizora w³¹czonego lub w trybie oczekiwa-
nia, kiedy wychodzisz z domu.
Ostrze¿enie!
Wszelkie ingerencje sprzeczne z przepisami, a w szczegól-
noci jakakolwiek zmiana wysokiego napiêcia lub wymiana
kineskopu mog¹ prowadziæ do zwiêkszenia natê¿enia
promieni . Odbiornik telewizyjny zmodyfikowany w ten
sposób jest niezgodny ze specyfikacjami producenta i nie
mo¿e byæ u¿ytkowany.
Wskazówki odnonie utylizacji odpadów:
Opakowanie i materia³y pomocnicze s¹ surowcem wtórnym i
powinny byæ poddane recyklingowi. Materia³y opakowaniowe,
np. worek foliowy, powinny byæ przechowywane z dala od dz-
ieci.
Baterie , wliczajac w to ów który jestescie ciezki metal - wolny ,
nie powinno byc gotowym od rezygnowac gospodarstwo do-
mowe pustynny. Podobac sie pozbywac sie uzywany baterie w
an srodowiskowo zdrowy sposób. Znalezc na zewnatrz okolo
ten zapisy przepisy który zastosowac w twój powierzchnia.
Spis treci
rodki ostro¿noci ................................................. 15
Przyciski pilota ........................................................16
Przyciski panelu sterowania .................................. 17
Antena ......................................................................17
Przygotowanie......................................................... 18
Zani w³¹czysz telewizor .......................................18
od³¹czanie zasilania .....................................................18
od³¹czanie anteny do telewizora ................................... 18
od³¹czanie urz¹dzeñ zewnêtrznych ..............................18
Wk³adanie baterii do pilota .............................................. 18
W³¹czanie i wy³¹czanie telewizora ........................18
W³¹czanie telewizora ......................................................18
Wy³¹czanie telewizora .................................................... 18
Ustawienia pocz¹tkowe..........................................18
Obs³uga za pomoc¹ przycisków panelu sterowania.........19
Obs³uga za pomoc¹ pilota...............................................19
Syste enu ...........................................................19
Menu D¿wiêk ..................................................................19
Format Obrazu ................................................................ 20
Menu Wyposa¿enie ........................................................21
Menu Instalacja ...............................................................22
Inne funkcje .............................................................24
Wy³¹czanie dwiêku .......................................................24
Stereo / Dwujêzyczny .....................................................24
Informacje na ekranie ......................................................24
rzyciski obs³ugi VCR / DVD i prze³¹cznik
VCR / / DVD..............................................................25
Teletekst ..................................................................25
Obs³uga teletekstu ..........................................................25
Wybór strony teletekstu ..................................................25
Wybór strony indeksowej ................................................26
Wyszukiwanie strony teletekstu w czasie ogladania
telewizji ...........................................................................26
Wybór tekstu o podwójnej wysokoci..............................26
Wywietlanie ukrytych informacji ....................................26
Wy³¹czanie automatycznego przewijania stron ............... 26
Wybór strony subkodu ....................................................26
Wyjcie z teletekstu .......................................................26
Fastext i Toptext .............................................................26
Pod³¹czanie urz¹dzeñ zewnêtrznych ...................27
Euroz³¹cze ...................................................................... 28
Tryb EXT 2 S ...................................................................28
Gniazda RCA ..................................................................28
Gniazdo ANT (antena) .....................................................28
Telewizor i magnetowid ...................................................28
Odtwarzanie w systemie NTSC ....................................... 28
Kopiowanie .....................................................................28
od³¹czanie s³uchawek ...................................................28
Wskazówki ...............................................................28
Dane techniczne .....................................................29
02-POL&EE-DK-41-AV28BH8.p65 2002.09.20., 13:3115
POLSKI - 16 -
= Tryb oczekiwania / Zasilanie
0 - 9 = rzyciski numeryczne
Prz ciski kolorowe
rzycisk Standard
( ) = Nastêpny program (Kursor w górê)
MENU = rzycisk Menu
( ) = Kursor w prawo / G³onoæ +
Teletekst / rzyciski obs³ugi VCR / DVD
= rze³¹cznik VCR / / DVD
= rzycisk Stereo / Napisy dwujêzyczne
= rzycisk informacyjny
( ) = oprzedni program (Kursor w dó³)
( ) = Kursor w lewo / G³onoæ -
AV = rzycisk AV
= rzycisk teletekstu
= Wy³¹cznik dwiêku
Przyciski pilota
9&5
'9'
3
$9 0( 18
3
67$1'$5'
79
UWAGA
RYZYKO PORA¯ENIA PR¥DEM
Symbol pioruna ze strza³k¹ w równobocznym trójk¹cie ostrzega u¿ytkownika przed obecnoci¹ w obudowie od-
biornika nie izolowanych czêci pod niebezpiecznym napiêciem, którego wielkoæ mo¿e byæ wystarczaj¹ca, aby
spowodowaæ pora¿enie pr¹dem.
Wykrzyknik w równobocznym trójk¹cie przypomina o wa¿nych wskazówkach na temat obs³ugi i konserwacji (ser-
wisu) zawartych w instrukcji do³¹czonej do odbiornika.
02-POL&EE-DK-41-AV28BH8.p65 2002.09.20., 13:3116
POLSKI - 17 -
Przyciski panelu sterowania
Antena
02-POL&EE-DK-41-AV28BH8.p65 2002.09.20., 13:3117
POLSKI - 18 -
Przygotowanie
Ustaw telewizor na stabilnej powierzchni.
Aby zapewniæ odpowiedni¹ wentylacjê, pozostaw co najmniej
10 cm wolnej przestrzeni wokó³ telewizora. Nie wolno ustaw-
iaæ ¿adnych przedmiotów na obudowie, aby unikn¹æ
zagro¿eñ i wadliwego dzia³ania telewizora.
Uzywaja ten aparat w tropikalnym i /albo zmniejszac (umiar-
kowany) klimaty.
Zanim w³ czysz telewizor
Pod³¹czanie zasilania
Uwaga: Telewizor przeznaczony jest do zasilania pr¹dem
zmiennym o napiêciu 220-240 V i czêstotliwoci 50 Hz.
o rozpakowaniu pozostaw odbiornik na chwilê, aby
osi¹gn¹³ temperaturê otoczenia, zanim pod³¹czysz go do
sieci.
Pod³¹czanie anteny do telewizora
W³¹cz wtyczkê anteny do wejciowego gniazda
antenowego znajduj¹cego siê z ty³u telewizora.
Pod³¹czanie urz¹dzeñ zewnêtrznych
Zobacz punkt Pod³¹czanie urz¹dzeñ zewnêtrzn ch na
stronie 27.
Zapoznaj siê równie¿ z instrukcjami do³¹czonymi do
urz¹dzeñ zewnêtrznych.
Wk³adanie baterii do pilota
Zdejmij pokrywê komory baterii z ty³u pilota, delikatnie
poci¹gaj¹c j¹ do góry we wskazanym miejscu.
W³ó¿ dwie baterie AAA (R03) lub ich odpowiedniki.
Za³ó¿ z powrotem pokrywê.
UWAGA: Jeli pilot nie jest u¿ywany przez d³u¿szy czas, bat-
erie nale¿y wyj¹æ z komory. W przeciwnym wypadku mo¿e
dojæ do uszkodzenia pilota z powodu wycieku elektrolitu z
baterii.
W³ czanie i wy³ czanie telewizora
Telewizor mo¿na obs³ugiwa za pomoc¹ pilota lub bez-
porednio przy u¿yciu przycisków na obudowie od-
biornika.
W³¹czanie telewizora
Aby w³¹czyæ telewizor, nale¿y wykonaæ dwie czynnoci:
1- Nacinij wy³¹cznik zasilania znajduj¹cy siê z przodu
telewizora. Odbiornik przejdzie w tryb oczekiwania i
zawieci siê czerwona lampka u do³u telewizora.
2- Aby w³¹czyæ odbiornik znajduj¹cy siê w trybie
oczekiwania:
Nacinij przycisk numeryczny na pilocie, ¿eby wybraæ numer
programu;
lub,
Nacinij przycisk trybu oczekiwania/wy³¹cznik zasilania z
przodu telewizora lub przycisk Nastêpny program albo o-
przedni program na pilocie, ¿eby w³¹czyæ telewizor; czerwo-
na lampka zacznie siê wieciæ na zielono.
UWAGA:
Je¿eli w ci¹gu 5 minut nie zostanie uzyskany sygna³
antenowy odpowiadaj¹cy wybranemu kana³owi, telewizor
prze³¹czy siê automatycznie w tryb oczekiwania.
Wy³¹czanie telewizora
Nacinij przycisk trybu oczekiwania na pilocie, ¿eby
w³¹czyæ tryb oczekiwania; zielona lampka zacznie siê
wieciæ na czerwono;
lub,
Nacinij wy³¹cznik zasilania z przodu telewizora.
UWAGA: Je¿eli wy³¹czysz telewizor wy³¹cznikiem zasilania,
a nie przyciskiem trybu oczekiwania na pilocie, to po nastêp-
nym naciniêciu wy³¹cznika zasilania telewizor w³¹czy siê od
razu bez przechodzenia w tryb oczekiwania.
Ustawienia pocz tkowe
o pierwszym w³¹czeniu telewizora na ekranie pojawi siê
menu (AUTOSTORE) APS, a odbiornik nastawi siê na tryb
wprowadzania ustawieñ pocz¹tkowych. Aby wprowadziæ
ustawienia pocz¹tkowe, wykonaj poni¿sze instrukcje.
Menu (AUTOSTORE) APS nie pojawi siê, jeli telewizor by³
ju¿ wczeniej raz w³¹czony. W takim przypadku u¿yj opcji
JÊZYK, KRAJ i APS w menu INSTALACJA, aby
wprowadziæ ustawienia pocz¹tkowe. Szczegó³owe
informacje znajdziesz w punkcie pt. Menu Instalacja na
stronie 22.
Jeli chcesz wprowadziæ ustawienia pocz¹tkowe póniej,
nacinij przycisk STANDARD, aby wy³¹czyæ to menu.
1. Nacinij przycisk lub , aby wybraæ opcjê
LANGUAGE (JÊZYK). Nastêpnie nacinij przycisk lub
, aby wejæ do podmenu LANGUAGE (JÊZYK).
2. Nacinij przycisk lub , aby wybraæ jêzyk.
Nastêpnie nacinij przycisk lub , aby go zachowaæ.
3. Nacinij przycisk MENU, aby powróciæ do menu APS.
4. Nacinij przycisk lub , aby wybraæ opcjê
KRAJ. Nastêpnie nacinij przycisk lub , aby wejæ
do podmenu KRAJ.
02-POL&EE-DK-41-AV28BH8.p65 2002.09.20., 13:3118
POLSKI - 19 -
5. Nacinij przycisk lub , aby wybraæ swój kraj.
Nastêpnie nacinij przycisk lub , aby go zachowaæ.
6. Nacinij przycisk MENU, aby powróciæ do menu APS.
7. Nacinij przycisk lub , aby wybraæ opcjê
Continue (Kont nuuj). Nastêpnie nacinij przycisk ,
aby w³¹czyæ funkcjê APS.
Funkcja APS automatycznie zachowuje odbierane kana³y
pod numerami programów.
o zakoñczeniu dzia³ania funkcji APS pojawi siê menu
PROGRAMY. Mo¿esz usun¹æ zachowany kana³ lub
zamieniæ numery dwóch wybranych kana³ów.
Szczegó³owe informacje znajdziesz w punkcie pt. Menu
Program na stronie 23.
8. Nacinij przycisk STANDARD, aby zakoñczyæ
ustawienia pocz¹tkowe.
Jeli kana³, który chcesz ogl¹daæ, nie jest zachowany,
mo¿esz go zachowaæ za pomoc¹ menu STROJENIE.
Szczegó³owe informacje znajdziesz w punkcie pt. Menu
Strojenie na stronie 22.
Obs³uga za po oc¹ przycisków panelu
sterowania
Za pomoc¹ przycisków na przednim panelu telewizora mo¿na
regulowaæ g³onoæ i wybieraæ programy.
Regulacja g³onoci
Nacinij przycisk - , aby zmniejszyæ g³onoæ, lub
+, aby zwiêkszyæ g³onoæ. o naciniêciu jednego z
tych przycisków na ekranie wywietlana jest skala
g³onoci.
W bór programu
Nacinij przycisk P , aby wybraæ nastêpny program, lub
przycisk P, aby wybraæ poprzedni program.
Wejcie do g³ównego menu
Nacinij przycisk MENU, aby wejæ do g³ównego menu.
W g³ównym menu wybierz podmenu przyciskiem P lub
P i wejd do podmenu u¿ywaj¹c przycisku + lub
- . Aby nauczyæ siê korzystaæ z menu, zapoznaj siê z
punktem S stem menu niniejszej instrukcji.
Obs³uga za po oc¹ pilota
ilot do³¹czony do telewizora s³u¿y do obs³ugi wszystkich
funkcji danego modelu. Funkcje opisane s¹ w instrukcji zgod-
nie z systemem menu telewizora.
Funkcje, które mo¿na obs³ugiwaæ nie korzystaj¹c z systemu
menu, opisane s¹ poni¿ej.
Regulacja g³onoci
Nacinij przycisk , aby zwiêkszyæ g³onoæ.
Nacinij przycisk , aby zmniejszyæ g³onoæ.
W bór programu
(poprzedni lub nastêpn program)
Nacinij przycisk , aby wybraæ poprzedni program.
Nacinij przycisk , aby wybraæ nastêpny program.
W bór programu (bezporedni):
Nacinij przycisk numeryczny na pilocie, aby wybraæ jeden z
programów od 0 do 9. o chwili na ekranie pojawi siê wybra-
ny program.
Aby wybraæ dwucyfrowy lub trzycyfrowy numer programu,
wprowad drug¹ lub trzeci¹ cyfrê w ci¹gu 2 sekund od
wybrania pierwszej cyfry.
System menu
Telewizor wyposa¿ony jest w system menu. Wywietl
MENU (g³ówne menu) i wejd do jednego z czterech menu
(OBRAZ, DWIÊK, INSTALACJA i WYPOSA¯ENIE).
1- Nacinij przycisk MENU, aby wywietliæ MENU
(g³ówne menu). W g³ównym menu wywietlone zostan¹
nazwy poszczególnych menu.
2- Nacinij przycisk lub , aby wybraæ nazwê
menu, a nastêpnie lub , aby wejæ do danego menu.
Aby wyjæ z menu, nacinij przycisk STANDARD.
Aby przejæ do poprzedniego menu, nacinij przycisk
MENU.
Menu D¿wiêk
Z iana ustawieñ d¿wiêku
Nacinij przycisk MENU, aby wywietliæ g³ówne menu.
W g³ównym menu wybierz DWIÊK za pomoc¹ przycisku
lub , a nastêpnie wejd do menu dwiêk,
naciskaj¹c przycisk lub .
02-POL&EE-DK-41-AV28BH8.p65 2002.09.20., 13:3119
This manual suits for next models
1
Table of contents
Languages:
Other JVC TV manuals
JVC
JVC I'Art Pro AV-56WP94 Manual
JVC
JVC LT-65MA 875 User manual
JVC
JVC AV28CT1EKS User manual
JVC
JVC AV-29LS2 User manual
JVC
JVC LT-47DV8BJ User manual
JVC
JVC AV-27FA44/BSA User manual
JVC
JVC AV-20NN15 User manual
JVC
JVC AV21BT70EP, AV28BT70EP User manual
JVC
JVC InteriArt Natural Vision T_V LINK AV28H20EU User manual
JVC
JVC PD-42WV74 User manual
JVC
JVC InteriArt AV28H20EUS User manual
JVC
JVC I Art AV-36F803 User manual
JVC
JVC LT-37S60BU User manual
JVC
JVC AV-14JT5EU, AV-21JT5EU User manual
JVC
JVC AV 32230 User manual
JVC
JVC AV-20F475 User manual
JVC
JVC AV-29RS(C-AU) User manual
JVC
JVC AV-16N8 Use and maintenance manual
JVC
JVC AV28L2EUGR User manual
JVC
JVC AV-21AT User manual
