JWA NAXOS 70626 User manual

NAXOS DUAL MONITOR ARM

TOOLS REQUIRED NOT INCLUDED
PARTS INCLUDED
a
b
c
(x2)
M4x12 (x8) M4x30 (x8)
12X5.8X16 (x8)
(x1)
S=4mm (x1)
S=5mm
A
B
C
(x1)
(x2)
?
D
M5x6 (x6) (x2)

C
c
Loosen clamp screw until enough space
is left for the edge of the desk.
Tighten clamp using clamp screw until mount
is securely fastened to desk.
Adjust locating ring at proper height and
screw up tight to hold the mount.
S=4mm
B
S=4mm
C
M5x6
D
Insert the arms to the steel
pipe above the locating ring.
1
2
3
4

OR
M4x12
A
A
M4x30
12X5.8X16

3
1 3
2 4
3
NOTE: Increase the tension in "+"
direction if the arm automatically sags,
decrease the tension in "-"
direction if the arm automatically rises.
B
S=5mm
Use a hex wrench to adjust the height tension
of the gas spring arm, to keep different weight
of monitors still at any position.
S=5mm
S=5mm
B
S=5mm
Use a hex wrench to adjust the damp for adjust.
Turn counter-clockwise to reduce damping and
clockwise to increase damping.
Insert cable covers in spring arm.
A
Insert cables into cable covers. Leave enough slack
of cables at arm joints for full adjustment.

Insert cable covers in spring arm.
Insert cables into cable covers. Leave enough slack
of cables at arm joints for full adjustment.
Product Care for Easy to Clean Material Items
To protect your furniture, we suggest the following:
Avoid placing your furniture in direct sunlight.
Do not place furniture directly under windows.
Do not place sharp materials (knife, fork, etc.) directly onto
your furniture as sharp material may scrape and damage the finish.
Do not place material with high temperature directly onto the surface
of your furniture.
Clean up spills quickly. Water left over a prolonged period of time may
cause damage. Alcohol, perfume, nail polishes, aftershave and some
medication may cause severe finish damage if not cleaned immediately.
Use a clean, soft, dry, lint free absorbent cloth to clean your furniture.
Do not use any detergent as they may contain ingredients that may react
and damage the finish.