Kärcher Extra RM 752 ASF User manual

QUICKSTART
5.965-278.0 01/14
Intensive deep cleaner Extra RM 752 ASF
Removal of care films
몇WARNING
These are only brief instructions! Please read the product information and observe the safety information on the
product label prior to using the detergent. Follow the dosing instructions on the product label.
The non-compliance with the safety information can cause damage to the object to be cleaned and risks
for the environment, the user and other persons.
Preparation
1ABCA Determine coating (e.g. paper clip test).
Use the intensive deep cleaner on coatings
insensitive to alkali (e.g. PVC / PUR) only.
B Select and prepare the machine and acces-
sory that is suitable for the floor covering.
C Dose the deep cleaner according to the thick-
ness of the care film to be removed
(approx. 20-30%, max. 50%).
Removing the care film
2A B C A Apply deep cleaner solution, do not
vacuum off.
B Allow deep cleaner solution to react
according to the thickness of the care film
to be removed (approx. 5-10 minutes).
C Mechanically treat the floor covering after
the reaction time, then vacuum off the dirt.
Removing residues
3ABCA Thoroughly post-clean the floor covering
with clear water until all detergent and dirt
residues are removed.
B Check pH-value. Repeat the post-cleaning
until a pH-value of 7-8.5 is reached.
C Priortoanewcoating,thefloorcoveringmust
be dry and free of dust.
몇CAUTION
Risk of damage due to detergent! Carefully clean
accessories, work materials and machines after
working.

QUICKSTART
5.965-278.0 04/14
Intensive deep cleaner Extra RM 752 ASF
Removal of soiling
몇WARNING
These are only brief instructions! Please read the product information and observe the safety information on the
product label prior to using the detergent. Follow the dosing instructions on the product label.
The non-compliance with the safety information can cause damage to the object to be cleaned and risks
for the environment, the user and other persons.
Preparation
1ABCA Determine coating (e.g. paper clip test).
Use the intensive deep cleaner on coatings
insensitive to alkali (e.g. PVC / PUR) only.
B Select and prepare the machine and acces-
sory that is suitable for the floor covering.
C Dose the deep cleaner according to the level
of the soiling to be removed (approx. 5-20%).
Deep cleaning
2A B C A Apply deep cleaner solution, do not
vacuum off.
B Allow deep cleaner solution to react accord-
ing to the level of soiling (approx. 2-5 min-
utes).
C Clean floor covering with the cleaning
machine. Vacuum off the dirt.
Note
In case of excessive dosage and/or a reaction
time that is too long, there is a risk of the care film
peeling off.
Removing residues
3AB A Thoroughly post-clean the floor covering with
clear water until all detergent and dirt resi-
dues are removed.
B Priortoanewcoating,thefloorcoveringmust
be dry and free of dust, the pH-value must be
7-8.5.
몇CAUTION
Risk of damage due to detergent! Carefully clean
accessories, work materials and machines after
working.