Kaiser Baas TV Stick User manual

TVStick
User Manual

Pg 2TVStickUser Manual
TVStick
Contents
2
3
4
5
11
1. TVStick connection details
2. Connecting the TVStick
3. Remote control
4. Software installation
5. Setting up the software
1

Pg 1TVStick User Manual
TVStick
TVStick connection details
The TVStick has two connections. A USB connector to connect to
a PC and an antenna connection for receiving TV signals.
USB 2.0
Antenna input
2

Pg 2TVStickUser Manual
TVStick
Connecting the TVStick
Connect an antenna to the TVStick.1.
The USB connector on the TVStick should be connected to2.
a USB port on the computer.
Note: An external antenna may be required to receive
DVB-T signals.
1.
2.
3

Pg 1TVStick User Manual
TVStick
Remote Control
4
MUTE: on/off sound1.
SNAP SHOT: takes a snapshot2.
of the current screen.
Screen toggle: switches3.
between full screen and
the default screen.
TotalMedia: open/close4.
TotalMedia software.
0-9: channel number keys5.
ESC: return6.
Time-Shift: pause live TV7.
Up/Down/Left/Right/OK8.
CH+/CH-: channel up/9.
channel down.
VOL+/VOL-: change volume10.
Record: record the current11.
program.
Play: play TV again after12.
pausing.
Stop: stops recording and13.
pre-recorded viewing and
returns to live TV
1 2 3 4
5
6
7 8
910
12 13
11

Pg 2TVStickUser Manual
TVStick
Software Installation
Connect the TVStick to a USB port on your computer.
The following or similar will appear in the bottom right hand
corner of your screen.
Insert the provided software installation CD into your computer’s
CD drive.
The following main menu should appear:
Select ‘Driver Install’.
5
Note: If the
installation
doesn’t autorun,
click ‘Start’ >
‘Computer’ >,
then double
click on your
optical drive and
double click on
‘autorun.exe’

Pg 1TVStick User Manual
TVStick
Select your preferred language and select ‘Next’.
A welcome screen will appear like you see below.
Select ‘Next’ on the following Destination location screen, then
select ‘Install’ to install the drivers.
6

Pg 2TVStickUser Manual
TVStick
Return to the main CD menu and select ‘Software Install’.
The following screen should appear:
Choose your preferred language then press ‘OK’.
7
When the driver installation has finished select ‘Finish’.

Pg 1TVStick User Manual
TVStick
The License agreement page will now appear. If you agree to the
software terms and conditions and would like to keep installing,
click on ‘Yes’.
8
The following screen should now appear; Click ‘Next’.