Kallista Tuxedo Wood Mirror P73040 User manual

INSTALLATION INSTRUCTIONS
Tuxedo Wood Mirror
1093543_2_A
1 of 3
Questions? Problems? For additional assistance, please contact Kallista’s Customer
Service Department at 1-888-4KALLISTA (1-888-452-5547) or FAX [phone].
P73040

INSTALLATION INSTRUCTIONS
Tuxedo Wood Mirror
1093543_2_A
2 of 3
Questions? Problems? For additional assistance, please contact Kallista’s Customer
Service Department at 1-888-4KALLISTA (1-888-452-5547) or FAX [phone].
THANK YOU FOR CHOOSING KALLISTA
We appreciate your commitment to Kallista quality products. Please take a moment to review this manual
before you install your Kallista product. If you encounter any installation or performance problems, please do
not hesitate to contact us at the phone number listed at the bottom of the page.
BEFORE YOU BEGIN
CAUTION: Risk of property damage. Select the type of fastener based on the wall material. Fasteners
must have a minimum of 35 lb (15.88 kg) load bearing. Install fasteners (not provided) through the mount-
ing cleat and into a stud to avoid possible property and product damage. If this is not possible, wall
anchors (not provided) must be inserted before installing the fasteners.
NOTE: Two people are recommended for all handling of this product including unpackaging, moving/lifting, and
hanging.
Observe all local building codes.
Read and understand these instructions completely and thoroughly before commencing with installation of
this product.
This product is shipped with a cleat securely attached to the back of the mirror.
Mounting hardware for securely attaching the separately- provided mounting cleat to the wall is not included
with this product. Approved fasteners for mounting this cleat may be purchased at any home improvement
store.
Select fasteners that are long enough to secure the mounting cleat to the nished wall. Take into account 
the combined thickness of the mounting cleat and wall material.
Every effort should be made to ensure that two fasteners engage the wood studs in the wall to ensure a
reliable mounting of this product.
Additional fasteners may be used as desired, or needed.
Kallista reserves the right to make revisions in the design of products without notice, as specied in the 
Price Book.
TOOLS AND MATERIALS
LevelPencil
Tape
Measure
SafetyGlasses Drill
Plus:
Fasteners●
Anchors●
Assorted Drill Bits●

INSTALLATION INSTRUCTIONS
Tuxedo Wood Mirror
1093543_2_A
3 of 3
Questions? Problems? For additional assistance, please contact Kallista’s Customer
Service Department at 1-888-4KALLISTA (1-888-452-5547) or FAX [phone].
MIRROR INSTALLATION
Distance from the top of
the mirror to the bottom
of the cleat mounted on
the back of the mirror.
Centerline of Mirror
Top of Mirror
Mounting Cleat
Measure the distance from the top of the mirror to the bottom
of the cleat mounted on the back of the mirror.
With an assistant, place the mirror in the desired location on
the wall making sure that it is level.
Mark the top of the mirror frame and the center of the mirror
frame on the wall.
With an assistant, carefully set the mirror aside.
Make another mark that is the same distance as from the top
of the mirror to the bottom of the cleat mounted on the back of
the mirror.
Place the bend of the mounting cleat along the line as shown,
making sure that it is level, and mark the location of the holes.
Drill the appropriate size holes for the fasteners and/or anchors
you are using. Install the anchors in the wall (if used).
Securely attach cleat to wall.
With an assistant, gently lower the mirror onto the mounting
cleat while centering cleat on mirror to cleat on wall.
Remove any visible markings from wall.