Kampmann KaDeck User manual

KaDeck
ceiling cassette
Installation and operating instructions
Keep these instructions in a safe place for future use!
Kampmann.de/installation_manuals
I506 12/19 EN SAP-Nr. 1221711

2
3.26 KaDeck
Versatile air conditioning for ofces and administration buildings
Installation and operating instructions
1 General .............................................................................................. 4
1.1 About these instructions ..................................................... 4
1.2 Explanation of symbols ....................................................... 4
1.3 Copyright protection .......................................................... 5
1.4 Customer service ................................................................. 5
2 Safety ............................................................................................... 6
2.1 Intended use......................................................................... 6
2.2 Limits of operation and use................................................. 6
2.3 Fundamental dangers.......................................................... 8
2.3.1 Danger from electrical energy ........................................... 8
2.4 Responsibility of the operator............................................. 9
2.5 Instruction ............................................................................ 9
2.6 Personnel requirements ...................................................... 10
 2.6.1 Qualications ...................................................................... 10
2.7 Personal protective equipment .......................................... 10
3 Technical data ..................................................................................... 11
3.1 Main dimensions of under-ceiling unit (dry cooling) ........ 11
3.2 Main dimensions of suspended ceiling unit
(dry cooling) ........................................................................ 12
3.3 Main dimensions of under-ceiling unit (wet cooling) ....... 13
3.4 Main dimensions of suspended ceiling unit
(wet cooling) ........................................................................ 14
3.5 Operating data..................................................................... 15
4 Construction and function................................................................. 17
4.1 Overview............................................................................... 17
4.2 Brief description .................................................................. 19
4.3 Accessories ........................................................................... 20
5 Transport, packaging and storage .................................................... 22
5.1 Safety information for transport ....................................... 22
5.2 Packing units ........................................................................ 22
5.3 Transport inspection ............................................................ 23
5.4 Packaging ............................................................................. 23
5.5 Storage.................................................................................. 24
6 Installation and wiring ...................................................................... 24
6.1 Requirements governing the installation site .................... 24
6.2 Installation............................................................................ 25
6.3. Suspending the unit............................................................. 26
6.4 Wet and dry cooling models ............................................... 27
6.5 Water connection with wet cooling ................................... 28
6.6 External fresh air supply ...................................................... 31
6.7 Wiring ................................................................................... 32
6.8 Overview of controls............................................................ 34
6.9 230 V electromechanical model .......................................... 35
6.10 KaControl model.................................................................. 37
6.10.1 Intended use......................................................................... 38
6.10.2 Operation of the KaController............................................ 39
6.10.2.1 Function keys, display elements.......................................... 41
6.10.2.2 Switching control off and on .............................................. 42
6.10.2.3 Temperature adjustment (absolute value) ......................... 43
6.10.2.4 Temperature setting (relative value, comfort control
active).................................................................................... 44

3
KaDeck 3.26
Versatile air conditioning for ofces and administration buildings
Installation and operating instructions
6.10.2.5 Fan setting............................................................................ 45
6.10.2.6 Time setting.......................................................................... 46
6.10.2.7 Timer programs .................................................................... 47
6.10.2.8 Deleting all timer programs and time ................................ 50
6.10.2.9 Operating mode changeover – Cooling mode /
Heating mode changeover.................................................. 51
6.11 Alarm messages.................................................................... 52
6.12 KaController installation ..................................................... 53
6.13 Troubleshooting A11 – A17 ................................................. 54
6.14 Cabling.................................................................................. 56
6.14.1 General information ............................................................ 56
6.14.2 KaController ......................................................................... 56
6.14.3 External room temperature sensor..................................... 57
6.14.4 Inputs for processing external contacts
(e.g. on-site BMS etc.) .......................................................... 57
6.14.5 Internal temperature sensor / air intake sensor................. 57
6.15 Addressing – Single-circuit controls ................................... 58
 6.16 SettingcongurationofunitbymeansofDIPswitch....... 59
6.17 Parameter settings ............................................................... 61
6.17.1 Setting the absolute setpoint temperature or ± 3K .......... 62
6.17.2 ON/OFF, Eco/Day functions .................................................. 63
6.17.3 Function of DI2..................................................................... 64
6.17.4 Function of digital outputs V1 and V2 ............................... 65
6.17.5 Function of multifunctional inputs AI1, AI2 and AI3......... 66
6.18 Functional test of the connected assemblies...................... 68
6.19 Parameter list for control PCB............................................. 69
6.20 KaController parameters ..................................................... 72
6.20.1 General ................................................................................. 72
6.20.2 Calling up the Parameter menu.......................................... 72
6.20.3 KaController parameter list................................................. 73
7 Operation and commissioning .......................................................... 77
7.1 Pre-commissioning checks .................................................. 77
7.2 Venting the heat exchanger................................................ 78
7.3 Switching on......................................................................... 79
8 Maintenance....................................................................................... 79
8.1 Securing against reconnection ............................................ 79
8.2 Maintenance schedule......................................................... 80
8.3 Maintenance work .............................................................. 81
 8.3.1 Changinglters.................................................................... 82
8.3.2 Cleaning / Visual inspections .............................................. 83
8.3.3 Extended cleaning work for the wet cooling model ......... 84
9 Faults ............................................................................................... 85
9.1 Fault display.......................................................................... 85
9.2 Fault table............................................................................. 86
10 Dismantling and disposal .................................................................. 87
10.1 Safety information for dismantling and disposal ............. 87
10.2 Dismantling .......................................................................... 87
10.3 Disposal ................................................................................ 88
12 Declaration of Conformity ................................................................ 89

4
3.26 KaDeck
Versatile air conditioning for ofces and administration buildings
Installation and operating instructions
1 General
1.1 About these instructions
  Theseinstructionsensurethesafeandefcienthandlingofthis
equipment. These instructions form an integral part of the unit
and must be kept in the direct vicinity of the unit and available
to personnel at all times.
All personnel must have carefully read through these
instructions prior to commencing all work on the equipment.
A fundamental prerequisite for safe working is compliance
with all the stated safety instructions and other instructions
contained in this manual.
In addition all local occupational health and safety at work
regulations apply, as do general safety provisions governing the
use of the equipment.
Illustrations in this guide are intended to provide a basic
understanding and may differ from the actual model.
1.2 Explanation of symbols
Important notes
DANGER!
This combination of symbol and signal word
indicates an immediately dangerous situation,
which will cause death or injuries if not avoided.
This symbol highlights useful hints,
recommendations and information for efcient
and trouble-free operation.
IMPORTANT NOTE!
This combination of symbol and signal word
indicates a possible dangerous situation, which can
cause material and environmental damage if not
avoided.

5
KaDeck 3.26
Versatile air conditioning for ofces and administration buildings
Installation and operating instructions
Other labels The following labels are used in this manual to highlight
instructions, results, listings, references and other elements:
1.3 Copyright protection
The contents of this manual are protected by copyright. Their
use is permitted when using the product. Any further use is not
permitted without written permission from the manufacturer.
1.4 Customer service
Our Customer Service team is available for technical
information:
We are always interested in receiving information and
experiences relating to the use of our products which could be
of value for improving our products.
Label Explanation
Step-by-step instructions
Results of actions
Reference to sections of the manual and
other applicable documents
Listswithoutspeciedsequence
[Button] Operating element (e.g. button, switch),
display element (e.g. indicator light)
“Display” Display elements (e.g. buttons, assignment
of function keys)
Address
Kampmann GmbH
Friedrich-Ebert-Str. 128–130
49811 Lingen (Ems), Germany
Phone [phone]
Fax [phone]
Email [email protected]
Website www.kampmann.de

6
3.26 KaDeck
Versatile air conditioning for ofces and administration buildings
Installation and operating instructions
2 Safety
This section provides an overview of all important safety
aspects to ensure optimum protection of personnel as well
as safe and trouble-free operation. Additional order-related
safety information is contained in the sections covering the
individual phases of the product's life.
2.1 Intended use
Intended use of the unit also includes adherence to these
instructions.
Any use beyond or other than the stated intended use is
considered misuse.
2.2 Limits of operation and use
The units are only intended to be used for heating and
cooling air in frost-free and dry rooms. Within the room, the
unit needs to be connected to the building's heating/cooling/
ventilation system and to the building's waste water and
power network.
We would refer to VDI-2035 Sheets 1 & 2, DIN EN 14336 and
DIN EN 14868 with regard to the properties of the medium
used to protect the equipment. The following values provide
further guidance.
The water used should be free of contamination, such as
suspended substances and reactive substances.
Limits of operation
Min./max. water temperature °C 5 – 80
Min./max. air intake temperature °C 15 – 40
Min./max. air humidity % 15 – 75
Max. operating pressure bar 8
Min./max. glycol percentage % 25 – 50
Max. relative air humidity 60 % at 27 °C ambient
temperature

7
KaDeck 3.26
Versatile air conditioning for ofces and administration buildings
Installation and operating instructions
Water quality
pH value*1 8 – 9
Conductivity*1 S/cm < 700
Oxygen content (02) mg/l < 0.1
Hardness °dH 4 – 8.5
Sulphur ions (S) not measurable
Sodium ions (Na+) mg/l < 100
Iron ions (Fe2+, Fe3+) mg/l < 0.1
Manganese ions (Mn2+) mg/l < 0.05
Ammonia ions (NH4+) mg/l < 0.1
Chlorine ions (CI) mg/l < 100
CO2ppm < 50
Sulphate ions (SO42-) mg/l < 50
Nitrite ions (N02-) mg/l < 50
Nitrite ions (N03-) mg/l < 50
WARNING!
Warning of misuse!
Never operate the unit in humid areas, such as
swimming pools, wet areas etc.
Never operate the unit in rooms with an
explosive atmosphere.
Never operate the unit in rooms with a high dust
content.
Never operate the unit in rooms that contain
high-temperature gases.
Never operate the unit in aggressive or corrosive
atmospheres (e.g. sea air).
Never operate the unit above electrical
equipment, such as switch cabinets, computers
or other electrical units, or contacts that are not
drip-proof.
Never operate the unit outdoors.
Keep windows closed during operation.
Only operate the unit fully assembled and
connected to the relevant supply networks
(waste water, heating/cooling, electricity).
Never operate the unit beyond its technical
specication ( Chapter 2 “Technical data” on
page 6).
Install the unit away from heaters or other
heating equipment.
 Ensurethattheairowcancirculatefreely.
Never place any objects on the unit.
Never cover the unit.
Always note the requirements for the
installation site ( Chapter 6.1 “Requirements
governing the installation site” on page 24).

8
3.26 KaDeck
Versatile air conditioning for ofces and administration buildings
Installation and operating instructions
2.3. Fundamental dangers
The following section lists residual risks that can be generated
by the unit even when operated as intended.
Observe the following safety instructions and the safety
information in the other sections of this manual to reduce the
risk of injury and damage to property and avoid dangerous
situations.
2.3.1 Danger from electrical energy
Electric current
DANGER!
Risk of fatal injury from electrocution!
Contact with live parts will lead to fatal injury
from electrocution. Damage to the insulation or
individual components can lead to a fatal injury.
 Onlypermitqualiedelectricianstoworkonthe
electrics.
Immediately disconnect the system and repair it
in the event of damage to the insulation.
Keep live parts away from moisture. This can
cause a short circuit.
Properly earth the unit.

9
KaDeck 3.26
Versatile air conditioning for ofces and administration buildings
Installation and operating instructions
2.4 Responsibility of the operator
Duties of the operator The unit is operated in the commercial sector. The operator of
the unit is therefore subject to the legal obligations concerning
occupational health and safety.
In addition to the safety instructions in these operating
instructions, the valid safety, accident prevention and
environmental protection regulations must be observed for the
area of use of the unit.
The following applies in particular:
The operator must be aware of the applicable health and
safety regulations and determine in a risk assessment other
hazards that may arise from the special working conditions
at the site of operation. He then has to implement this in
the form of operating instructions for the operation of the
unit.
The operator must regulate and specify the responsibilities
for installation, operation, troubleshooting, maintenance
and cleaning.
The operator must ensure that all staff who work on
the unit have read and understood these instructions. In
addition, he must also train personnel and inform them of
the possible dangers at regular intervals.
It is the responsibility of the operator to provide
maintenance and repair personnel with the necessary
personal protective equipment and advise them of the
necessity to wear it.
Furthermore, the operator is responsible for ensuring that
the equipment is always in perfect condition. The following
therefore applies:
The operator must ensure that the maintenance intervals
described in this manual are adhered to.
Hygiene requirements Theoperatormustcomplywiththespecicationsinline
with the pertinent legal standards and guidelines relating
to hygiene applicable at the installation site. This includes
ensuring that
fresh and waste water are hygienically separated,
the pertinent maintenance and test intervals are complied
with,
the requirements for air ducts and diffusers are complied
with,
 thepredenedltergradesarecompliedwith,
when using, please comply with the applicability of VDI
6022 and the corresponding guidelines.
2.5 Instruction
The manufacturer offers training for users. For contact details
please refer to Chapter 1.4 “Customer service” on page 5.

10
3.26 KaDeck
Versatile air conditioning for ofces and administration buildings
Installation and operating instructions
2.6 Personnel requirements
2.6.1 Qualications
Only permit personnel to carry out work if they can be
expected to carry out this work reliably.
People with impaired reactions, possibly due to drugs, alcohol
or medication, are not permitted to carry out work.
  Qualiedelectrician
  Qualiedelectricianshavebeentrainedforthespecic
environment in which they work and understand the pertinent
standards and regulations.
Installation personnel
This training provides installation personnel with the technical
knowledge and experience, as well as knowledge of the
pertinent regulations, needed to carry out the assigned tasks
and independently recognise possible dangers. Installation
personnel have all the necessary equipment and tools.
Caretakers/users
Caretakers/users have been instructed by the manufacturer in
the tasks assigned to them and possible dangers of improper
conduct. Caretakers/users are only permitted to carry out tasks
thatgobeyondnormaloperationifthisisspeciedinthis
manual.
VDI 6022
Maintenance personnel must be trained to Category B (possibly
Category C) to comply with hygiene requirements
2.7 Personal protective equipment
Personal protective equipment is used to protect people from
impaired safety and health when working with the unit. The
applicable accident prevention regulations at the place of use
apply in all cases.
Personnel have to wear personal protective equipment, about
whichspecicmentionismadeincertainsectionsofthis
manual, during maintenance and troubleshooting work on and
with the unit.

11
KaDeck 3.26
Versatile air conditioning for ofces and administration buildings
Installation and operating instructions
3 Technical data
3.1 Main dimensions of under-ceiling unit (dry cooling)
one- and two-sided discharge (dimensions in mm)
Unterdeckengerät, zweiseitig ausblasend
Unterdeckengerät, einseitig ausblasend
Zwischendeckengerät, zweiseitig ausblasendZwischendeckengerät, einseitig ausblasend
Vorderansicht
Vorderansicht
Vorderansicht Vorderansicht
Ansicht von oben
Ansicht von oben
Ansicht von oben Ansicht von oben
Unterdeckengerät, zweiseitig ausblasend
Unterdeckengerät, einseitig ausblasend
Zwischendeckengerät, zweiseitig ausblasendZwischendeckengerät, einseitig ausblasend
Vorderansicht
Vorderansicht
Vorderansicht Vorderansicht
Ansicht von oben
Ansicht von oben
Ansicht von oben Ansicht von oben
Weights
Connections, female thread
Eurokonus, same end, connections on right
Unit design Unit
Weight [kg]
one-sided discharge 32
two-sided discharge 42
The cable openings are on the opposite side
Waterside connections
Front view Front view
View from below View from below
Front view Front view
Plan view Plan view
Under-ceiling unit, one-sided discharge Under-ceiling unit, two-sided discharge

12
3.26 KaDeck
Versatile air conditioning for ofces and administration buildings
Installation and operating instructions
3.2 Main dimensions of suspended ceiling unit (dry cooling)
one- and two-sided discharge (dimensions in mm)
Unterdeckengerät, zweiseitig ausblasendUnterdeckengerät, einseitig ausblasend
Zwischendeckengerät, zweiseitig ausblasendZwischendeckengerät, einseitig ausblasend
Vorderansicht Vorderansicht
Vorderansicht Vorderansicht
Ansicht von oben Ansicht von oben
Ansicht von oben Ansicht von oben
Waterside connections
Front view Front view
View from below View from below
Plan view Plan view
Suspended ceiling unit, one-sided discharge Suspended ceiling unit, two-sided discharge
Weights
Connections, female thread
Eurokonus, same end, connections on right
Unit design Unit
Weight [kg]
one-sided discharge 32
two-sided discharge 42
The cable openings are on the opposite side
Front view Front view

13
KaDeck 3.26
Versatile air conditioning for ofces and administration buildings
Installation and operating instructions
84*
86* 84*
147*
44 84
68
54
*Das Mantelblech ist umlaufend mit Armaflex (6 mm) beklebt:
Vollständiges Abstandsmaß = Maß + 6 mm
84*
86* 84*
147*
44 84
68
54
*Das Mantelblech ist umlaufend mit Armaflex (6 mm) beklebt:
Vollständiges Abstandsmaß = Maß + 6 mm
84*
86* 84*
147*
44
84
68
54
*Das Mantelblech ist umlaufend mit Armaflex (6 mm) beklebt:
Vollständiges Abstandsmaß = Maß + 6 mm
84*
86* 84*
147*
44
84
68
54
*Das Mantelblech ist umlaufend mit Armaflex (6 mm) beklebt:
Vollständiges Abstandsmaß = Maß + 6 mm
3.3 Main dimensions of under-ceiling unit (wet cooling)
one- and two-sided discharge (dimensions in mm)
Waterside connections
Plan view Plan view
Under-ceiling unit, one-sided discharge Under-ceiling unit, two-sided discharge
Weights
Connections, female thread
Eurokonus, same end, connections on right
Unit design Unit
Weight [kg]
one-sided discharge 32
two-sided discharge 42
Vorderansicht Vorderansicht
Ansicht von unten Ansicht von unten
Ansichten von unten Ansichten von unten
Front view Front view
View from below View from below
The cable openings are on the opposite side
Front view Front view

14
3.26 KaDeck
Versatile air conditioning for ofces and administration buildings
Installation and operating instructions
* 6mmArmaexisbondedtoallsidesofthemetalsleeve.
Total clearance dimension = dimension + 6 mm
3.4 Main dimensions of suspended ceiling unit (wet cooling)
one- and two-sided discharge (dimensions in mm)
Waterside connections
Front view Front view
Plan view Plan view
Suspended ceiling unit, one-sided discharge Suspended ceiling unit, two-sided discharge
Weights
Connections, female thread
Eurokonus, same end, connections on right
Unit design Unit
Weight [kg]
one-sided discharge 32
two-sided discharge 42
The cable openings are on the opposite side
Front view Front view
View from below View from below

15
KaDeck 3.26
Versatile air conditioning for ofces and administration buildings
Installation and operating instructions
One-sided discharge Dry cooling model 1) Wet cooling model 2)
Speed range Maximum Medium5) Minimum Maximum Medium5) Minimum
Control voltage [V] 10 8 6 4 2 10 8 6 4 2
Air volume V[m³/h] 337 278 221 163 106 196 157 119 81 42
Power consumption P[W] 20 17 9 5 4 20 17 9 5 4
Speed n [rpm] 1100 925 750 575 400 1100 925 750 575 400
Sound pressure level 4) LWA[dB(A)] 37 33 29 25 20 35 33 27 23 <20
Sound power level LPA [dB(A)] 45 41 37 33 28 43 41 35 31 <28
Cooling mode
Cooling output Qk[W] 999 837 672 498 314 1609 1392 1157 891 588
Outlet air
temperature
tL2[°C] 17.6 17.3 17.1 16.8 16.5 12.4 11.9 11.2 10.5 9.4
Water volume V[l / h] 430 360 289 214 135 277 239 199 153 101
Pressure loss dP [kPa] 29 21.2 14.4 8.5 3.8 8 7 5 3 1.2
Heating mode 3)
Heat output QH[W] 4176 3495 2807 2077 1308 2936 2493 2024 1515 961
Water volume V[l / h] 223 188 152 113 72 154 132 107 81 52
Pressure loss dP[kPa] 7.7 5.7 3.9 2.3 2.31 3 2 1 1 1
One-sided discharge Dry cooling model 1) Wet cooling model 2)
Speed range Maximum Medium5) Minimum Maximum Medium5) Minimum
Control voltage [V] 10 8 6 4 2 10 8 6 4 2
Air volume V[m³/h] 635 525 418 308 199 369 297 225 152 79
Power consumption P[W] 30 27 14 7 5 30 27 14 7 5
Speed n [rpm] 1100 925 750 575 400 1100 925 750 575 400
Sound pressure level 4) LWA[dB(A)] 40 36 32 28 23 38 35 30 26 21
Sound power level LPA [dB(A)] 48 44 40 36 31 46 43 38 34 29
Cooling mode
Cooling output Qk[W] 1718 1465 1203 921 607 3114 2650 2153 1598 979
Outlet air
temperature
tL2[°C] 18.6 18.3 17.9 17.5 17 11.2 10.6 10 9.3 8.4
Water volume V[l / h] 738 630 517 396 261 535 456 370 275 168
Pressure loss dP [kPa] 75.3 56.9 40.2 25.2 12.1 55 41 29 17 7
Heating mode 3)
Heat output QH[W] 7185 6124 5028 3850 2533 5339 4465 3554 2578 1530
Water volume V[l / h] 379 324 268 206 137 286 240 192 140 84
Pressure loss dP[kPa] 19.6 14.9 10.6 6.7 3.3 15 10 7 4 2
1) with LPHW 16 / 18 °C, tL1 = 27 °C
2) with CHW 7 / 12 °C and tL1 = 27 °C, 48% relative humidity
3) with LPHW 75 / 65 °C, tL1 = 20°C
4) The sound pressure levels were calculated with an assumed room insulation of 8 dB(A).
This corresponds to a distance of 2 m, a room volume of 100 m³ and a reverberation time of 0.5 s (in accordance with VDI 2081)
5) Recommendedspeedrangeoffansforoptimumenergyefciencyandcomfort
3.5 Operating data
Version: one-sided discharge for under-ceiling installation
Version: two-sided discharge for under-ceiling installation

16
3.26 KaDeck
Versatile air conditioning for ofces and administration buildings
Installation and operating instructions
One-sided discharge Dry cooling model 1) Wet cooling model 2)
Speed range Maximum Medium5) Minimum Maximum Medium5) Minimum
Control voltage [V] 10 8 6 4 2 10 8 6 4 2
Air volume V[m³/h] 299 247 197 145 94 196 157 119 81 42
Power consumption P[W] 20 17 9 5 4 20 17 9 5 4
Speed n [rpm] 1100 925 750 575 400 1100 925 750 575 400
Sound pressure level 4) LWA[dB(A)] 37 33 29 25 20 35 33 27 23 <20
Sound power level LPA [dB(A)] 45 41 37 33 28 43 41 35 31 <28
Cooling mode
Cooling output Qk[W] 896 748 599 441 275 1570 1360 1133 874 579
Outlet air
temperature
tL2[°C] 17.4 17.2 17 16.7 16.4 12.7 12.2 11.5 10.7 9.6
Water volume V[l / h] 385 322 258 190 118 270 234 195 150 100
Pressure loss dP [kPa] 23.9 17.4 11.8 6.9 3 8 6 5.3 3.3 1
Heating mode 3)
Heat output QH[W] 3744 3125 2501 1841 1146 2876 2442 1986 1492 950
Water volume V[l / h] 201 168 135 100 63 151 129 105 80 51
Pressure loss dP[kPa] 6.4 4.7 3.2 1.9 1 2.7 2 1.4 1 1
One-sided discharge Dry cooling model 1) Wet cooling model 2)
Speed range Maximum Medium5) Minimum Maximum Medium5) Minimum
Control voltage [V] 10 8 6 4 2 10 8 6 4 2
Air volume V[m³/h] 565 467 371 274 177 369 297 225 152 79
Power consumption P[W] 30 27 14 7 5 30 27 14 7 5
Speed n [rpm] 1100 925 750 575 400 1100 925 750 575 400
Sound pressure level 4) LWA[dB(A)] 40 36 32 28 23 38 35 30 26 21
Sound power level LPA [dB(A)] 48 44 40 36 31 46 43 38 34 29
Cooling mode
Cooling output Qk[W] 1558 1325 1092 825 540 3050 2598 2116 1575 968
Outlet air
temperature
tL2[°C] 18.4 18.1 17.7 17.3 16.9 11.4 10.9 10.3 9.5 8.5
Water volume V[l / h] 670 569 469 355 232 524 447 364 271 166
Pressure loss dP [kPa] 63.4 47.6 33.9 20.7 9.8 53 40 28 16 7.4
Heating mode 3)
Heat output QH[W] 6514 5537 4562 3447 2253 5247 4391 3503 2550 1519
Water volume V[l / h] 344 294 244 185 122 280 236 189 138 83
Pressure loss dP[kPa] 16.6 12.5 9 5.6 2.7 14 10 7 4.4 1.8
1) with LPHW 16 / 18 °C, tL1 = 27 °C
2) with CHW 7 / 12 °C and tL1 = 27 °C, 48% relative humidity
3) with LPHW 75 / 65 °C, tL1 = 20°C
4) The sound pressure levels were calculated with an assumed room insulation of 8 dB(A).
This corresponds to a distance of 2 m, a room volume of 100 m³ and a reverberation time of 0.5 s (in accordance with VDI 2081)
5) Recommendedspeedrangeoffansforoptimumenergyefciencyandcomfort
Version: one-sided discharge for suspended ceiling installation
Version: two-sided discharge for suspended ceiling installation

17
KaDeck 3.26
Versatile air conditioning for ofces and administration buildings
Installation and operating instructions
4 Construction and function
4.1 Overview
1
2
4
5
3
3
Connecting frame
Ceiling panel
Air outlets
Invisible latches
Invisible latches
4
7
6
12
Features
3
13
Air inlet

18
3.26 KaDeck
Versatile air conditioning for ofces and administration buildings
Installation and operating instructions
6Waterside connection
7
8
9
10
12
13
11
Fresh air connection
Condensation pump
Heat exchanger
Hinge
Air lter
Junction box
EC tangential fan
1Connecting frame:
the suspended ceiling models
have a frame on all sides, which
connects the KaDeck to the
suspended ceiling
2Ceiling panel:
RAL 9010 powder coated,
RAL 9003 air intake grille
other colours are optionally
possible on request
3Invisible latch:
complies with the industry
standard for a virtually unlimited
service life without disturbing the
design
4Air outlets:
depending on the model, the air
outlets are ideally positioned to
maximise the Coanda effect and
minimise draughts
5Air inlet:
large air inlet grille with large
free cross-section
6Waterside connection:
the waterside (and electrical)
connections are arranged so that
no further service hatches are
needed on site
7Fresh air connection:
all models have possible fresh air
supply from above
the suspended ceiling model
also offers the option of a side
connection through the optional
primary air nozzle
8Condensation pump:
quiet condensation pump with
alarm contact on the wet cooling
model
9Heat exchanger:
optimised for dry or wet cooling
for maximum performance with a
2-pipe system
10  Condensationpumpandoat
switch:
extremely robust design
invisible from outside
enables simple and frequent
maintenance without damage
if required, the cover panel can
be fully and simply removed
11 EC tangential fan:
with continuous EC energy-
saving technology
motor monitoring with internal
fault processing
optimised ow for minimum
noise
12  Airlter:
optional air lter for purifying
ambient air and to protect the
heat exchanger
13 Electrical wiring:
can be lowered for wiring or
maintenance purposes
optimum accessibility
a dew-point monitor can
optionally be tted

19
KaDeck 3.26
Versatile air conditioning for ofces and administration buildings
Installation and operating instructions
4.2 Brief description
The KaDeck is a decentralised unit for heating, cooling and
lteringair,includinginhotels,ofcesandbusinesspremises.
Thankstotheefcient,extremelyquietfan,theindividual
comfort temperature is quickly reached.
Operating mode Secondary air is drawn into the central part of the ceiling
panel.Theairisroutedrstthroughtheairintakegrilleto
theoptionallter,whichremovesdustfromthesecondaryair,
protecting the downstream components from dirt.
The air is drawn in by the fan, located directly downstream
ofthelterandpassesthroughthecopper-aluminiumheat
exchanger. Depending on the temperature at which the
mediumowsthroughtheheatexchanger,theairiseither
cooled or heated in the exchanger.
The air then passes through the outlet air slats into the room.
Condensation can be produced at the heat exchanger when
cooling with low water temperatures. Two different versions
of the KaDeck are available. Should the water temperature
lie below the dew point, the “wet cooling” version with
condensation tray and pump must be installed.
If the temperatures lie above the dew point, the “dry cooling”
version can be selected. An optional dew point monitor should
be selected or an on-site monitoring system installed to prevent
the temperature from falling below the dew point.

20
3.26 KaDeck
Versatile air conditioning for ofces and administration buildings
Installation and operating instructions
Figure Article Properties Suitable for Art. no.
Valves/Return shut-off valves
Valve body
angled, ½" connection
all KaDecks
194000100970
angled, ½" connection, pre-settable 194000346910
Adjustment key pre-settable 194000346915
Return shut-off valve angled, ½" connection 194000155953
Other
Fresh air connection
tting for the connection of primary air suspended ceiling units 326007010103
Airlter for installation in the air intake area all KaDecks 326007010002
Valve actuators
Thermoelectric
actuator 24 V AC/DC all KaDecks 194000146906
KaControl accessories
KaController room
control unit
with one-key operation
room control unit, wall-mounted, in a high-quality
design, plastic housing, colour similar to RAL 9010,
large LCD multifunctional display, integrated room
temperature sensor, communication interface
to Kampmann T-LAN bus system, automatically
switching LED backlight, press/turn dial with click
stop function, individually adjustable basic display,
integrated day, night and week program, password-
protected parameter level for C1 control option
all models 196003210021
KaController room
control unit
with side operating keys
for quick access to fan setting, operating modes,
Eco mode, time and timer program, otherwise as
art. no. 196003210001
all models 196003210022
KaController without
function keys, black
room control unit for wall mounting, high-quality
design, plastic housing, trafc black (similar to
RAL 9017), otherwise as art. no. 196003210001
all models 196003210026
Control accessories, electro-mechanical
Universal clock-room
temperature controller
combined ush-mounted room and clock thermostat.
Pure white cover panel and frame (similar to
RAL 9010). Large, graphically illuminated display;
operating panel with four variably assignable sensor
keys. Integrated room temperature sensor and
integrated weekly programme, with optionally four
operating programmes.
- 24 V AC/DC operating voltage
- 24 V AC/DC output signal for valves and 0 – 10 V
output signal for fan control
all models 196000030456
more »
4.3 Accessories