K&S ARISMD User manual

ariMD Installation Guides
Copyright K&S Advanced Systems Ltd
All Rights Reserved
arimds
Installation Guide

ariMD Installation Guides
Copyright K&S Advanced Systems Ltd
All Rights Reserved
1. Introduction
1.1. Installation Highlights
1.1.1 Installation
arismdxxx –Active vibration isolation modular system with number of
independent individually managed and controlled vibration isolation units
(isolators).
arisMDxxx installation is performed by K&S engineers. Once the system is
installed, initialized and optimized its typically does not require any re-tuning.
1.1.2 General arisMD installation diagram
Each one of arisMD modules are absolutely independent and standalone.
arisMD PoCom box, which supplied together with the system provides
centralized Power Supply to each one of the modules and Communication LAN Switch
capabilities, allowing user to connect to all devices together and each of the modules
separately. Two cables only (supplied together with the system) connected between each
module and arisMD PoCom box (Figure 1)
Power Cable
LAN Cable
Figure 1

ariMD Installation Guides
Copyright K&S Advanced Systems Ltd
All Rights Reserved
2. Unpack the System
Figure 2
Unpack all arismd isolators and arisMD PoCom box

ariMD Installation Guides
Copyright K&S Advanced Systems Ltd
All Rights Reserved
3. Mechanical Installation Instruction
Step 1:
Attached Loading Plate to arismd Isolator (Supplied together with the system) - Figure
3
Figure 3

ariMD Installation Guides
Copyright K&S Advanced Systems Ltd
All Rights Reserved
Step 2:
Insert Isolators under the machine frame in appropriate points. No Need to lift the
machine! Figure 4
Figure 4
Step 3:
Attach Loading Plates to Machine Frame in all relevant points. Figure 5
Attachment points defined by K&S Engineer’s prior installation
Figure 5

ariMD Installation Guides
Copyright K&S Advanced Systems Ltd
All Rights Reserved
Step 4:
Adjust Leveling by M12 locking nuts to each arismd Isolator. Figure 6
Figure 6
Step 5:
Using External Leveling bubble or similar tool ensure that the machine is leveled by
adjusting leveling one by one for all arismd Isolators. Figure 7
Figure 7
Step 7:
Connect LAN and Power Cable for each one of Isolators and plug in to arisMD PoCom
box Figure 1