KAP MB-PAS-150211 User manual

BENZ 2015 PAS
(Rear Camera Interface)
MODEL MB-PAS-150211
DATE 2015.10.15

Main Spec.
1. Input Spec. (MULTI VIDEO INTERFACE)
- 1 x Analog RGB Input (Navigation System output)
- 1 x CVBS(REAR CAMERA) Input. (Rear camera source)
- 1 x CVBS(FRONT CAMERA) Input. (Front camera source)
- 1 x LVDS Input. (Car Command System)
2. Output Spec.
- 1 x LCD Output (LCD Operation)
3. Power Spec.
- Input Power : 8VDC ~ 24VDC
- Consumption Power : 12Watt, Max
4. Switch Input mode
- Possible to select CAR model while switching mode by DIP S/W
- By button on the Commander in the car via CAN

External Appearance
POWER/CAN
LCD-OUT
LCD-IN
LED
DIP S/W
PROGRAM
FRONT
IMAGE
REARNAVI

Connector Pin Assignment
*POWER Connect
①BATTERY (Yellow)
②REAR_POWER (Red)
③CAN-HIGH (Orange)
④CAN-LOW (White)
⑤NC
⑥GND (Black)
①②③④⑤⑥
*NAVI Connect
①R DATA (Red)
②G DATA (Green)
③B DATA (Blue)
④SYNC (White)
⑤GND (Black)
⑥NC
⑦+5V
①②③④⑤⑥⑦

Product Composition
Power Cable 1 EA LVDS Cable 1 EA
Interface 1 EA
RGB Navi Cable 1 EA
OSD Board 1 EA

Product Composition Option
Option : RGB Cable 1 EAOption : Sub Board 1 EA Not for sale : HDMI Cable 1 EA

DIP S/W Setting
* ON : DOWN , OFF : UP * DIP S/W Example
PIN FUNCTION DIP S/W Selection
1 NAVI ON : Not Used
OFF : Used
2 VIDEO mode ON : Not used
OFF : used
3 N.C
4 HDMI ON : Not Used
OFF : Used
5 REAR Operation ON : USER
OFF : OEM
6
CAR type SEL Right Picture7
8
C class 8.4”Model
C/GLC class 7”Model
S class 12”Model
E/B/CLA/CLS/GLE class
7”/8”Model
S class 12”split view

DIP S/W Setting
Mode Change
* Install Navigation, Dip S/W 1 must OFF
MB2015-PAS
INTERFACE
POWER/CAN NAVI
PROGRAM
LCD -OUT
FRONT REAR LCD -IN
DIP_S/W IMAGE LED

DIP S/W Setting
Parking Mode
OEM
Time setting : Parking(P) to Drive(D) mode
P
R
N
D
2
L
P
R
N
D
2
L
OEM
Parking 15sec after or Drive 10Km speed
No Delay

OSD(On Screen Display) Control
MENU Push -> OSD menu On/Off
SEL Item Selection, Value Selection
UP Item up
Increase selected value
DOWN Item down
Decrease selected value
Mode State
First Menu Second Menu Third Menu
OSD Control Board
MENU SEL UP DOWN

OSD(On Screen Display) Control
First Menu Second Menu Third Menu Action
Option
RearCam-Type OEM Original Camera
ExtDevice Use aftermarket Rear camera
RearCam-Power
ON Rear camera get +12V consistently
AUTO Rear camera get +12V when reverse gear on
OFF Shut out the power supply.
FrontCam-Type OEM Original Camera
ExtDevice Use aftermarket Front camera
FrontCam-Power
ON Front camera get +12V consistently
AUTO Front camera get +12V when reverse gear on
OFF Shut out the power supply.
RearCam-RcvOpt ON Show Frontcam 25sec after rear mode.
OFF Default
Reset Excute Option Menu all Reset

OSD(On Screen Display) Control
First Menu Second Menu Third Menu Action
Image
Brightness Adjust the value of brightness
Contrast Adjust the value of contrast
Color-RED Adjust the value of RED
Color-GREEN Adjust the value of GREEN
Color-BLUE Adjust the value of BLUE
Reset Excute Option Menu all Reset
First Menu Second Menu Third Menu Action
Image
Brightness Adjust the value of brightness
Contrast Adjust the value of contrast
Saturation Adjust the value of Saturation
Hue Adjust the value of Hue
Sharpness Adjust the value of Sharpness
Reset Excute Option Menu all Reset
NAVI-RGB menu DVD,DVB-T(DMB),NAVI-AV,REAR,FRONT menu
<< Brightness >>
<< Contrast >>
<< Saturation >>

OSD Setting– Screen Mode
- Horizontal
- Vertical
- Scaler X Up
- Scaler X Down
- Scaler Y Up
- Scaler Y Down
OSD(On Screen Display) Control

OSD(On Screen Display) Control
OSD Setting – Parking Mode On/Off
PARKING LINE ON PARKING LINE OFF

OSD(On Screen Display) Control
OSD Setting – Parking sensor Display On/Off
OPS ON OPS OFF

- Option -> RearCam-RcvOpt -> 0 second = RearCam-RcvOpt menu OFF
1~30 second = RearCam-RcvOpt menu ON & time control
OSD(On Screen Display) Control
OSD Setting – Front Camera Auto Mode
OEM
NAVI
AV1(DVB-T)
AV2(DVD)
REAR FRONT
OEM
NAVI
AV1(DVB-T)
AV2(DVD)
1~30 second

- Factory Reset : Execute - Reset All (Setting Default)
- Version : FW Version
Finish update FW, check the FW versoin
OSD(On Screen Display) Control
OSD Setting – Utility Mode
Software Version
Software Month
Software Year
Special Version
National : CN=CHINA, KR=KOREA, JP=JAPAN, US=United States
Hardware Version
PIP model : PP=PIP, LV=LVDS
Motor model : BM=BMW, BE=BENZ, MA=MASERATI, LX:LEXUS
Last Source : BEPP06SGX-130950

1. Installation Diagram
Install Manual
Monitor
Command
LVDS
LVDS
MB 2015 PAS
INTERFACE
POWER/CAN LCD -IN LCD -OUT RGB
+5V NC GND SYNC BLUE GREEN RED

2. Installation External Reverse(Rear) Camera Connection : OSD Screen selection CAN
Install Manual
CAN
6. GND (Black)
5. NC
4. CAN-LOW (White)
3. CAN-HIGH (Orange)
2. REAR_POWER (Red)
1. BATTERY (Yellow)
MB2015-PAS
INTERFACE
POWER/CAN NAVI
REAR-POWER (Red)

Install Manual
3. Installation External HDMI cable
Galaxy
1
2
②
①
①or ②
iPhone5
RGB Cable Sub Board HDMI Cable
MHL Cable
MB2015-PAS
INTERFACE
POWER/CAN NAVI