Kaptur KP1200 User manual

KP1200 - QuickGuide_EN_V10.docx
KP1200 PROFESSIONAL READER
LETTORE CODICI A BARRE 1D/2D
Quick Guide
The device is manufactured by Trovi Technology CO., LTD. Kaptur brand, logos and Kaptur slogans are proprietary of
Trovi Technology CO., LTD. and TechSigno srl. While the information found in this manual has been accurately verified,
Trovi Technology assumes no liability for errors that may be herein contained or for damage to property or persons
resulting from an improper use of the same or the software derived from it. Trovi Technology reserves the right to
change the contents and the form of this document as well as to modify the product specifications at any time. The
information contained in this document is property of Trovi Technology to whom all rights are reserved. No part of
this document may be photocopied, reproduced or translated in another language without express written consent
by Trovi Technology Co., LTD
Trovi Technology Co., LTD.
410, 4th floor, Sunrise Industry Building, 10 Hong Man Street, Chai Wan, Hong Kong
Assistance: [e-mail]
Web-site: http://www.kaptur-id.com
Trademarks
Trademarks cited in this manual are property of the respective owners.
Safety information
Carefully read the general information regarding safety before using the device for the first time. An improper use of
the device could damage the device or cause harm to both people and things.
CE certification
The device conforms to European Directive EMC 2014/30/EU – LVD 2014/35/EU
Disposal (RAEE)
The barred mobile container present on the product, the documentation or the packaging indicates the
necessity, within the European Union, of a separate collection for expired electric and electronic
products, including the batteries and the accumulators.
The user should, therefore, take the equipment at the end of its useful life separate waste collection of
electronic and electrical waste, or return it to the dealer. Do not dispose of these products in unsorted municipal
refuse. Return the product to an authorized collection center to avoid damage to the environment or human health
caused by uncontrolled disposal of waste and to promote the sustainable re cycling of materials
Improper disposal of the product by the user entails the application of administrative sanctions provided by law
RoHS
This device and all its components, subcomponents and consumables were produced in accordance with European
directive 2011/65/EU and its Amendment 2015/863/EU, (EU) 2017/2012 also known as RoHS (Restrictions on the use
of certain Hazardous Substances). This directive serves to reduce the polluting substances used in electronic devices.

Notes:
1. More details refer to the User Manual；
2. For better readability, please print this document with laser printer;
3. Version: KP1200 - QuickGuide_EN_V10.docx
KP1200 PROFESSIONAL READER 1D/2D BARCODE READER Quick Guide
Parts of the imager
Installing the cable
1. Switch off the host;
2. Refer to the below pictures, connect the host with the imager based on different cables;
3. Ensure that all connections are secure.
4. Switch on the host system. If the installation is successful, the beeper will beep and LED will
light.
Return default parameters and version information
Default value initialization
Note: If the host cannot receive data normally because the input speed of the imager is too fast, please
scan the barcode below:
Inter Character Delay 5msec
Programming instruction and example
Two programming modes have been provided as bellows:
Single-scan setting
Scan the appropriate Single Scan code
Example: To set Flow Control to be XON/XOFF
Multiple-scan setting
Example: To set Flow Control to be XON/XOFF
Scan “Option bar code”
Scan “The 1st character of option”
Scan “The 2nd character of option”
Scan “END”
F
Inside the standard packaging you will find: A Barcode Reader, an USB Cable, a flexible stand
(optional), this Quick Guide (for a complete user manual please visit the web
www.kaptureid.com or www.kaptureonline.com and download it from download section
F
Use a piece of dry and soft cloth when cleaning the scanner. Be careful and do not scrap the
reading windows.
1. LED
2. Beeper
3. Exit window
4. Trigger
5. Release-hole of the cable
6. Cable interface port
Cavo R232 OPTIONAL
Cavo USB

Notes:
1. More details refer to the User Manual；
2. For better readability, please print this document with laser printer;
3. Version: KP1200 - QuickGuide_EN_V10.docx
Reading techniques
1. Press and hold the trigger, the imager projects a green LED square which allows positioning the
barcode within its field of view and turns on a white LED for illumination.
2. When reading a barcode, the green LED square will be smaller when the imager is closer to the
barcode and larger when it is farther from the barcode. Please hold the imager at an
appropriate distance from the barcode and center the green LED square on the barcode.
3. On a successful barcode reading, the imager will beep once, and the green LED square and
white LED will be turned off. Then the imager transmits barcode message to the host.
Scanning mode
Note: The factory default settings are indicated with asterisks (*).
Volume of beeper
Low
Middle
High*
Enable illumination in low light conditions
Notes: This function is only valid in auto-induction mode.
Disable*
Enable
USB settings
To c onfig ure the US B wo rking mode us e bel ow co des
HID keyboard (*)
USB virtual COM
Keyboard Layout
To configure the country keyboard layout, use the below codes
More keyboard layouts are available on the User Manual
USA (*)
Italian
German
Installing the Stand
Note: The stand is an optional part