Kaptur KP1401 User manual

KP1401 - QuickGuide_EN_V12.doc
KP1401
PROFESSIONAL COUNTER 1D/2D BARCODE READER
Quick Guide
The device is manufactured by Trovi Technology CO., LTD. Kaptur brand, logos and Kaptur slogans are proprietary of
Trovi Technology CO., LTD. and TechSigno srl. While the information found in this manual has been accurately
verified, Trovi Technology assumes no liability for errors that may be herein contained or for damage to property or
persons resulting from an improper use of the same or the software derived from it. Trovi Tec hnolo gy reserves the
right to change the contents and the form of this document as well as to modify the product specifications at any
time. The information contained in this document is property of Trovi Technology to whom all rights are reserved.
No part of this document may be photocopied, reproduced or translated in another language without express
written consent by Trovi Technology Co., LTD
Trovi Technology Co., LTD.
410, 4th floor, Sunrise Industry Building, 10 Hong Man Street, Chai Wan, Hong Kong
Assistance: [e-mail]
Web-site: http://www.kaptur-id.com
Trademarks
Trademarks cited in this manual are property of the respective owners.
Safety information
Carefully read the general information regarding safety before using the device for the first time. An improper use of
the device could damage the device or cause harm to both people and things.
CE certification
The device conforms to European Directive EMC 2014/30/EU – LVD 2014/35/EU
Disposal (RAEE)
The barred mobile container present on the product, the documentation or the packaging indicates
the necessity, within the European Union, of a separate collection for expired electric and electronic
products, including the batteries and the accumulators.
The user should, therefore, take the equipment at the end of its useful life separate waste
collection of electronic and electrical waste, or return it to the dealer. Do not dispose of these products in unsorted
municipal refuse. Return the product to an authorized collection center to avoid damage to the environment or
human health caused by uncontrolled disposal of waste and to promote the sustainable re cycling of materials
Improper disposal of the product by the user entails the application of administrative sanctions provided by law
RoHS
This device and all its components, subcomponents and consumables were produced in accordance with European
directive 2011/65/EU and its Amendment 2015/863/EU, (EU) 2017/2012 also known as RoHS (Restrictions on the
use of certain Hazardous Substances). This directive serves to reduce the polluting substances used in electronic
devices.

Notes:
1. More details refer to the User Manual；
2. For better readability, please print this document with laser printer;
3. Version: KP1401 - QuickGuide_EN_V12.doc
KP1401 PROFESSIONAL COUNTER 1D/2D BARCODE READER Quick Guide
Parts of the imager
Installing the cable
1. Switch off the host;
2. Refer to the below pictures, connect the host with the imager based on different cables;
3. Ensure that all connections are secure.
4. Switch on the host system. If the installation is successful, the beeper will beep and LED will
light.
USB cable
Return default parameters and version information
Default value initialization
Note: If the host cannot receive data normally because the input speed of the imager is too fast, please
scan the barcode below:
Programming instruction and example
Two programming modes have been provided as bellows:
Single-scan setting
Scan the appropriate Single Scan code
Example: To set Flow Control to be XON/XOFF
Multiple-scan setting
Example: To set Flow Control to be XON/XOFF
Scan “Option bar code”
Scan “The 1st character of option”
Scan “The 2nd character of option”
Scan “END”
F
Inside the standard packaging you will find: A Barcode Reader, an USB Cable, a flexible
stand (optional), this Quick Guide (for a complete user manual please visit the web
www.kaptureid.com or www.kaptureonline.com and download it from download section
F
Use a piece of dry and soft cloth when cleaning the scanner. Be careful and do not scrap
the reading windows.
Scan window
Beeper
Trigger

Notes:
1. More details refer to the User Manual；
2. For better readability, please print this document with laser printer;
3. Version: KP1401 - QuickGuide_EN_V12.doc
Reading techniques
1. Press and hold the trigger, the imager projects a green LED square which allows positioning
the barcode within its field of view and turns on a white LED for illumination.
2. When reading a barcode, the green LED square will be smaller when the imager is closer to
the barcode and larger when it is farther from the barcode. Please hold the imager at an
appropriate distance from the barcode and center the green LED square on the barcode.
3. On a successful barcode reading, the imager will beep once, and the green LED square and
white LED will be turned off. Then the imager transmits barcode message to the host.
Scanning mode
Note: The factory default settings are indicated with asterisks (*).
Volume of beeper
Low
Middle
High*
Enable illumination in low light conditions
Notes: This function is only valid in auto-induction mode.
Disable*
Enable
USB settings
To conf igure the USB working mode use below codes
HID keyboard (*)
USB virtual COM
Keyboard Layout
To conf igure the country keyboard layout, use the below codes
More keyboard layouts are available on the User Manual
USA (*)
French
Italian
Spanish
Denmark
German