Kaptur KP3103 User manual

KP3103_USB - QuickGuide_EN_V10.doc
KP3103 Laser Barcode Scanner
Quick Guide
The device is manufactured by Trovi Technology CO., LTD. Kaptur brand, logos and Kaptur slogans are proprietary of
Trovi Technology CO., LTD. an d TechSi gn o sr l. While the information found in this manual has been accurately
verified, Trovi Technology assumes no liability for errors that may be herein contained or for damage to property or
persons resulting from an improper use of the same or the software derived from it. Trovi Technology reserves the
right to change the contents and the form of this document as well as to modify the product specifications at any
time. The information contained in this document is property of Trovi Technology to whom all rights are reserved.
No part of this document may be photocopied, reproduced or translated in another language without express
written consent by Trovi Technology Co., LTD
Trovi Technology Co., LTD.
410, 4th floor, Sunrise Industry Building, 10 Hong Man Street, Chai Wan, Hong Kong
Assistance: [e-mail]
Web-site: http://www.kaptur-id.com
Trademarks
Trademarks cited in this manual are property of the respective owners.
Safety information
Carefully read the general information regarding safety before using the device for the first time. An improper use of
the device could damage the device or cause harm to both people and things.
CE certification
The device conforms to European Directive 1999/5/EC.
Disposal (RAEE)
The barred mobile container present on the product, the documentation or the packaging indicates the
necessity, within the European Union, of a separate collection for expired electric and electronic products,
including the batteries and the accumulators.
The user should, therefore, take the equipment at the end of its useful life separate waste collection of electronic
and electrical waste, or return it to the dealer. Do not dispose of these products in unsorted municipal refuse.
Return the product to an authorized collection center to avoid damage to the environment or human health caused
by uncontrolled disposal of waste and to promote the sustainable re cycling of materials
Improper disposal of the product by the user entails the application of administrative sanctions provided by law
RoHS
This device and all its components, subcomponents and consumables were produced in accordance with European
directive 2002/95/EC also known as RoHS (Restrictions on the use of certain Hazardous Substances). This directive
serves to reduce the polluting substances used in electronic devices.
Notes:
1. More details refer to the User Manual
2. For better readability, please print this document with laser printer;
KP3103 Laser Barcode reader. Quick Guide
Parts of the scanner
① LED
② Reading Windows
③ Push Button (Trigger)
④ Connector Port for the USB Cable
⑤ Service Hole to release the USB Cable
⑥ Buzzer
USB Cable installation
1. Switch Off the Computer
2. Refer to the below pictures, connect the USB Cable to the computer and to the scanner.
3. Ensure than all the connections are secure on both layer (Computer and Scanner)
4. Switch on the Computer. If installation is correct the LED  will lights Up and the Buzzer  will emit a beep.
USB cable
Removing the Cable from Scanner
1. Switch Off the computer and unplug the USB Cable
2. Find the Service Hole ⑤
3. Insert a thin wire or a nail and made a slight pression.
4. Gently pull out the USB Cable
Programming instruction and example
Scan Start Configuration
Scan Option
Scan end Configuration
Start Configuration
USA Keyboard Style
End Configuration
Example: Set Keyboard Layout
To restore the factory default parameters read the below barcode
Start Configuration
Reset Factory Default
End Configuration
F
Inside the standard packaging you will find: A Barcode Reader, an USB Cable, a flexible stand (optional), this Quick
Guide (for a complete user manual please visit the web www.kaptureid.com or www.kaptureonline.com and
download it from download section
F
Use a piece of dry and soft cloth when cleaning the scanner. Be careful and do not scrap the reading windows.

Notes:
1. More details refer to the User Manual
2. For better readability, please print this document with laser printer;
KP3103 Keyboard configuration
Start Configuration
USB HID
USB Virtul COM
USA Keyboard Layout
ITALIAN Keyboard Layout
GERMAN Keyboard Layout
DENMARK Keyboard Layout
FRENCH Keyboard Layout
NETHERLAND Keyboard layout
NORWAY Keyboard layout
POLAND Keyboard layout
End Configuration
Set the Inter-character delay
Start Configuration
NO Delay
5msec Delay
10msec Delay
15msec Delay
End Configuration
Notes:
1. More details refer to the User Manual
2. For better readability, please print this document with laser printer;
Reading & Buzzer Mode
Start Configuration
Trigger Reading Mode
Continuos Reading Mode
Buzzer on Reading On
Buzzer on Reading Off
End Configuration
Terminator string and Lower/Upper Conversion Case
Start Configuration
Term i n a l -CR
Term i n a l -CR+LF
Term i n a l -TAB
No Conversion Case
Convert All to Upper Case
Convert All to Lower Case
End Configuration