Kärcher RM 801 User manual

1
RM 801
Alkaline rim cleaner
For washing installations for cars or commercial vehicles.
RM 801 is a highly efficient rim cleaner to remove brake dust.
RM 801 is either sprayed on manually before the vehicle enters the washing installation or
applied by the spray system of the washing installation.
Rinse with high pressure immediately after the soak time.
RM 801 is strongly alkaline and does not attack uncoated concrete floors and steel drive-in
wheel troughs.
Application instructions and processing
Special notes:
Do not let it dry up!
Never spray on hot rims, precool with water if necessary !
Never apply on aluminium rims that are uncoated or where the
varnish is damaged, or
on other predamaged rims or painted parts
Observe the manufacturer's instructions with special rims!
Store in a frost-free environment!
pH value in the concentrate approximately 13.5.
RM 801 is degradable to EEC 648/2004.
Attention
S2 Keep out of the reach of children.
S23 Do not breathe fumes/aerosol.
S26 In case of contact with eyes, rinse immediately with plenty of water and seek medical
advice.
S28 After contact with skin, wash immediately with plenty of water.
S36/37/39 Wear suitable protective clothing, gloves and eye/face protection.
Prespray unit - manual: Dilution (RM + water)
1 + 9
10 %
Dosing equipment
Washing installation Dilution (RM + water)
1 + 9 ... 1 + 4
10 % ... 20 %
Soak time
10 seconds to 1 minute maximum
Application temperature
use only cold
Consumption with
concentrate / car
approximately 20 ml
Prespray unit - manual: Dilution (RM + water)
1 + 9
10 %

2
S45 In case of accident or if you feel unwell, seek medical advice immediately (show the
label where possible).
S51 Use only in well-ventilated areas.
S60 This material and its container must be disposed of as hazardous waste.
Further information: Material Safety Data Sheet
Alfred Kärcher GmbH & Co.
KG
Alfred-Kärcher-Str. 28-40
D-71364 Winnenden
Phone [phone]
Fax [phone] - 2212
http://www.karcher.com