Kärcher CV 30/1 User manual

Register and win!
www.kaercher.com
CV 30/1
CV 38/1
59648220 08/12
Deutsch 5
English 10
Français 15
Italiano 21
Nederlands 27
Español 33
Português 39
Dansk 45
Norsk 50
Svenska 55
Suomi 60
Ελληνικά 65
Türkçe 71
Русский 76
Magyar 82
Čeština 88
Slovenščina 93
Polski 98
Româneşte 104
Slovenčina 110
Hrvatski 115
Srpski 120
Български 125
Eesti 131
Latviešu 136
Lietuviškai 142
Українська 147

1
2
3
4
5
6
12
15 11 16
21
18
18
18
20
9
8
14 13
11
23
19
24
25
26
28
27
29
22 17
12
7
10
2

1
3
2
5
6
2
1
4
3
4
1
43
2
5
6
3

A
B
C
D
2.
1.
1.
E
4.
3.
F
4

– 1
Please read and comply with
these original instructions prior
totheinitialoperationofyourapplianceand
store them for later use or subsequent own-
ers.
–Before first start-up it is definitely nec-
essaryto readthe safetyindications Nr.
5.956-249!
–The non-compliance of the operating
and safety instructions may lead to
damages of the appliance and to dan-
gers for the operator and other persons.
–Incaseof transport damageinform ven-
dor immediately
–When unpacking the product, make
sure that no accessories are missing
and that none of the package contents
have been damaged. Notes about the ingredients (REACH)
You will find current information about the
ingredients at:
www.kaercher.com/REACH
Danger
Immediate danger that can cause severe
injury or even death.
몇Warning
Possible hazardous situation that could
lead to severe injury or even death.
Caution
Possible hazardous situation that could
lead to mild injury to persons or damage to
property.
몇Warning
Theapplianceisnotsuitableforvacuuming
dust which endangers health.
Caution
This unit is only to be used indoors.
–The vacuum cleaner is meant for dry
cleaning of floors and walls.
–Thisapplianceis suited forthe commer-
cial use, e.g. in hotels, schools, hospi-
tals,factories,shops,offices,andrental
companies.
Contents
Environmental protection . . EN . . .1
Symbols in the operating in-
structions . . . . . . . . . . . . . . EN . . .1
Proper use . . . . . . . . . . . . . EN . . .1
Device elements. . . . . . . . . EN . . .2
Operation . . . . . . . . . . . . . . EN . . .2
Transport . . . . . . . . . . . . . . EN . . .2
Storage. . . . . . . . . . . . . . . . EN . . .2
Maintenance and care . . . . EN . . .2
Troubleshooting . . . . . . . . . EN . . .3
Warranty. . . . . . . . . . . . . . . EN . . .4
Accessories and Spare Parts EN . . .4
EC Declaration of Conformity EN . . .4
Technical specifications . . . EN . . .5
Environmental protection
The packaging material can be
recycled. Please do not throw
the packaging material into
householdwaste;pleasesendit
for recycling.
Oldappliancescontainvaluable
materials that can be recycled;
these should be sent for recy-
cling. Batteries, oil, and similar
substances must not enter the
environment. Please dispose of
your old appliances using ap-
propriate collection systems.
Symbols in the operating
instructions
Proper use
10 EN

– 2
Illustration on Page 2
1 Indicator lamp (red)
2 Cable hook, rotating
3 Handle adjustment
4 Crevice nozzle
5 Upholstery nozzle
6 Nameplate
7 Suction hose on the brush head
8 Locking mechanism of the filter bag
9 Filter bag
10 Unlocking brush head
11 Motor protection filter
12 Filter casing
13 Locking mechanism of the motor pro-
tection filter
14 Locking mechanism of the filter casing
15 Exhaust filter
16 Fastening screw of the side part
17 Side part
18 Turn-lock fastener of the brush cover
19 Brush head
20 Brush roller
21 Brush cover
22 Indicator bundle (red)
23 Pile height adjustment knob
24 Filter cover
25 Main switch
26 Suction tube
27 Suction hose
28 Handle
29 Power cord
Plug in the main plug.
Switch on the appliance at the main
switch.
Set the pile height via the adjustment
knob of the brush head.
Perform the cleaning operation.
Illustration
몇Warning
When sucking with the vacuum wand, the
brush head with the rotating brush roller
may not be placed on a long pile carpet.
Longercontactwiththerotatingbrushroller
could damage or destroy the carpet.
Switch off the appliance at the main
switch.
Pull out the mains plug.
Caution
Risk of injury and damage! Observe the
weightofthe appliancewhenyou transportit.
When transporting in vehicles, secure
the appliance according to the guide-
lines from slipping and tipping over.
Caution
Risk of injury and damage! Note the weight
of the appliance in case of storage.
This appliance must only be stored in inte-
rior rooms.
Danger
Firstpull outthe plugfrom themains before
carrying out any tasks on the machine.
Clean the brush roller.
Check the wear of the brush roller.
Note: The degree of the wear is shown by
a comparison with the indicator bundle of a
differentcolour.Whentheblackbristlesare
atthesame heightasthe redones,replace
the brush roller.
Device elements
Operation
Turning on the Appliance
Cleaning operations
Brush roller operation
Suction pipe operation
Turn off the appliance
Transport
Storage
Maintenance and care
Maintenance intervals
Daily
Weekly
11EN

– 3
Dismount the brush cover if necessary:
Turn the turn-lock fasteners by 90° and
remove the brush cover.
Cut hair and threads that have got
woundonthebrushrollerusingapairof
scissors or just remove them.
Unlock and remove the filter cover.
Illustration
Turn the locking mechanism of the filter
bag towards the right. Close, remove,
and dispose of the filter bag.
Illustration
Insert a new filter bag and turn the lock-
ing mechanism of the filter bag towards
the left.
Insert and lock filter cover.
Unlock and remove the filter cover.
Pushthelockingmechanismofthefilter
casing upwards and remove the filter
casing.
Remove the exhaust filter from the filter
housing.
Insert new exhaust filter into filter hous-
ing.
Insert and click the filter housing into its
place.
Insert and lock filter cover.
Unlock and remove the filter cover.
Pushthelockingmechanismofthemotor
protection filter upwards. Remove and
dispose of the motor protection filter.
Install and lock the new motor protec-
tion filter.
Insert and lock filter cover.
Dismount the side part by means of a
coin.
Pull out the brush roller and dispose of.
Insert a new brush roller.
Reinstall side part.
Danger
Firstpull outthe plugfrom themains before
carrying out any tasks on the machine.
Illustration
Illustration
Illustration
Note: If necessary, dismount brush cover
(refer to "Cleaning of the brush roller").
–No electrical voltage.
Check the receptacle and the fuse of
the power supply.
Check the power cable and the power
plug of the device.
–Thermostat switched off the motor be-
cause of overheating
Replace blocked filters or remove
blockages from the suction hose.
The unit is operational again after it has
cooled down.
Note: The brush roller is equipped with a
slip clutch that disengages when oversized
or blocking objects are sucked in.
Note: The clutch is re-engaged after the
unit is switched off. This produces a loud
rattling sound.
Check the brush roller for obstructing
objects and remove them if necessary.
Thenoise cannotbe heardwhentheunitis
switched back on.
Cleaning the brush roller
Replacing the filter bag
Replace exhaust filter
Replace motor protection filter
Replacing the brush roller
Troubleshooting
Remove blockings
Suction pipe/suction hose
Suction hose on the brush head
Brush roller/brush head
Motor does not run
Rattling noise when switched off
12 EN

– 4
Check the brush roller for obstructing
objects and remove them if necessary.
Remove obstructions from brush head,
suction pipe and suction hose.
Replace the filter bag.
Replace exhaust air filter or motor pro-
tection filter.
Check the pile height adjustment knob
for correct adjustment.
Replace the brush roller.
Remove obstructions from brush head,
suction pipe and suction hose.
Replace the filter bag.
The warranty terms published by the rele-
vant sales company are applicable in each
country. We will repair potential failures of
your appliance within the warranty period
free of charge, provided that such failure is
caused by faulty material or defects in man-
ufacturing. In the event of a warranty claim
please contact your dealer or the nearest
authorized Customer Service centre.
Please submit the proof of purchase.
–Only use accessories and spare parts
which have been approved by the man-
ufacturer. The exclusive use of original
accessories and original spare parts
ensures that the appliance can be oper-
ated safely and trouble free.
–At the end of the operating instructions
youwillfindaselectedlistofspareparts
that are often required.
–For additional information about spare
parts, please go to the Service section
at www.kaercher.com.
We hereby declare that the machine de-
scribed below complies with the relevant
basicsafety andhealthrequirements ofthe
EU Directives, both in its basic design and
construction as well as in the version put
into circulation by us. This declaration shall
cease to be valid if the machine is modified
without our prior approval.
5.957-726
The undersigned act on behalf and under
the power of attorney of the company man-
agement.
Authorised Documentation Representative
S. Reiser
Alfred Kärcher GmbH Co. KG
Alfred-Kärcher-Str. 28 - 40
71364 Winnenden (Germany)
Phone: [phone]
Fax: [phone]
Winnenden, 2010/07/14
Unsatisfying suction result
The red indicator lamp is ON
Warranty
Accessories and Spare Parts
EC Declaration of Conformity
Product: Dry vacuum cleaner
Type: 1.023-xxx
Type: 1.435-xxx
Relevant EU Directives
2006/42/EC (+2009/127/EC)
2004/108/EC
Applied harmonized standards
EN 55014–1: 2006+A1: 2009+A2: 2011
EN 55014–2: 1997+A1: 2001+A2: 2008
EN 60335–1
EN 60335–2–69
EN 61000–3–2: 2006+A1: 2009+A2: 2009
EN 61000–3–3: 2008
EN 62233: 2008
Applied national standards
-
CEO Head of Approbation
13EN

– 5
Technical specifications
CV 30/1 CV 38/1
Mains voltage V 220-240 220-240
Frequency Hz 50/60 50/60
Max. performance W 1150 1150
Air volume (max.) l/s 48 48
Negative pressure (max.) kPa (mbar) 20,7 (207) 20,7 (207)
Protective class II II
Length x width x height mm 985 x 380 x 250 1220 x 390x320
Width of the brush roller mm 300 380
Typical operating weight kg 8,6 9,2
Max. ambient temperature °C +40 +40
Values determined to EN 60335-2-69
Sound pressure level LpA dB(A) 68 68
Uncertainty KpA dB(A) 1 1
Hand-arm vibration value m/s2<2,5 <2,5
Uncertainty K m/s20,2 0,2
Power cord H05VV-F 2x1,0 mm2
Part no.: Cable length
EU 4.649-002.0 12 m
GB 4.649-003.0 12 m
AU 4.649-005.0 12 m
14 EN

CV 30/1
153

CV 38/1
154