
RFID Mounting Accessories |Page 1 of 3
Pole Mount Kit for WIRA 40 Outdoor
936B108 /d/0918 | Subject to change.
KATHREIN Solutions GmbH, Kronstaudener Weg 1, 83071 Stephanskirchen, Germany
Phone +49 8036 90831-20 | Fax +49 8036 90831 69 | www.kathrein-solutions.com | iot-info@kathrein-solutions.com
Pole bracket for installing WIRA 40° antennas outdoor.
Usable with the Following Antennas
Order No. 52010262
Type MK-WPGM-100-100-Outdoor
Max. load-bearing capacity [kg] 6.0
Adjustment range
Elevation [°] +20/–45 (elevation angle)
Usable pole diameters [mm] 42–115
Weight [kg] 2.5
Packing size (L x W x H) 295 x 295 x 100
Material
Bracket galvanised steel sheet
Pole clips hot-dop galvanised steel
Screws galvanised steel
General Specifications
Selecting the Installation Location
WIRA 40 Antenna Series Order No. Type
52010251 WIRA-40-linear-ETSI
52010252 WIRA-40-linear-FCC
Risk of an injury or damage to property due to an inappropriate antenna mounting!
►Make sure that the pole has adequate load-bearing capacity.
►If necessary, use a dierent pole.
Caution