KaVo Dental 1056 S/T Installation guide

Care instructions
KaVo SYSTEM 1056 S/T
Always be on the safe side.

Sales:
KaVo Dental GmbH
Bismarckring 39
D-88400 Biberach
Tel. [phone]
Fax [phone]
Manufacturer:
Kaltenbach & Voigt GmbH
Bismarckring 39
D-88400 Biberach
www.kavo.com

Care instructions KaVo SYSTEM 1056 S/T
Contents
Contents
Contents ............................................................................................................................................................1
1 User notes ......................................................................................................................................................2
1.1 User guidelines .........................................................................................................................................2
1.1.1 Abbreviations ....................................................................................................................................2
1.1.2 Symbols ............................................................................................................................................2
1.1.3 Target group .....................................................................................................................................2
2 Preparation methods .....................................................................................................................................3
2.1 Cleaning ...................................................................................................................................................3
2.1.1 Manual cleaning ...............................................................................................................................3
2.1.2 Automatic cleaning ...........................................................................................................................6
2.2 Disinfection ...............................................................................................................................................7
2.2.1 Manual disinfection ...........................................................................................................................7
2.2.2 Automatic disinfection .......................................................................................................................7
2.3 Sterilisation ...............................................................................................................................................8
2.4 Filling the water bottle ............................................................................................................................12
1/14

Care instructions KaVo SYSTEM 1056 S/T
1 User notes | 1.1 User guidelines
1 User notes
1.1 User guidelines
Requirement
Read these instructions before the initial startup to prevent misuse and damage.
1.1.1 Abbreviations
Short
form
Explanation
GA Instructions for use
PA Care instructions
MA Assembly instructions
TA Technician's instructions
STK Safety check
IEC International Electrotechnical Commission
RA Repair instructions
EMC Electromagnetic compatibility
1.1.2 Symbols
See Safety/Hazard Warning Symbol chapter
Important information for users and engineers
CE (Communauté Européenne) mark. Products bearing this mark conform
to the requirements of the pertinent EC directives (applicable European
standards).
Action prompt
1.1.3 Target group
This document is for dentists and office personnel.
2/14

Care instructions KaVo SYSTEM 1056 S/T
2 Preparation methods | 2.1 Cleaning
2 Preparation methods
CAUTION
Damage to product as a result of improper cleaning.
Malfunctions, unclean surfaces and risk of infection for operator and patients.
▶ When using detergents, adhere to the manufacturer's instructions.
CAUTION
Damage to product as a result of improper disinfection.
Malfunctions.
▶ When using disinfectants, adhere to the manufacturer's instructions.
▶ When disinfecting, wipe only.
▶ Do not immerse product or product parts in water or other fluids.
Note
Do not use solvents or aggressive chemicals!
2.1 Cleaning
2.1.1 Manual cleaning
▶ Switch off the instrument's main switch.
Dental chair
CAUTION
Colour transfer from textiles.
Permanent colour variation that cannot be remedied.
▶ Remove stains immediately using soap and water.
3/14

Care instructions KaVo SYSTEM 1056 S/T
2 Preparation methods | 2.1 Cleaning
▶ Clean all exterior surfaces with a soft cloth and a mild, non-abrasive cleaning
fluid.
Unit body
▶ Clean all exterior surfaces with a soft cloth and a mild, non-abrasive cleaning
fluid.
Aspiration hoses
▶ Aspirate 150 ml (min.)/250 ml (max.) of water.
▶ Push down the dosing device once with the aspiration handpiece attached or by
hand.
▶ Aspirate DEKASEPTOL gel from the dosing device.
▶ Remove hose and place in holder.
4/14

Care instructions KaVo SYSTEM 1056 S/T
2 Preparation methods | 2.1 Cleaning
▶ Repeat procedure for the saliva ejector and spray mist aspiration hose.
DEKASEPTOL gel basic set
Mat. no. 1.000.7204
DEKASEPTOL gel refill canister
Mat. no. 1.000.7205
Spittoon
▶ Add one dose of DEKASEPTOL gel to the spittoon.
5/14

Care instructions KaVo SYSTEM 1056 S/T
2 Preparation methods | 2.1 Cleaning
▶ Disperse the DEKASEPTOL gel using a brush and leave to take effect.
▶ When the requisite action time has passed, press the spittoon button.
The spittoon and drain are thoroughly rinsed.
Filters
▶ Remove aspiration hose from holder.
▶ Hold a paper towel beneath the filter receptacle on the casing.
▶ Pull filter out of casing.
▶ Fit new filter Mat. no. 0.763.3423 into receptacle.
2.1.2 Automatic cleaning
Not applicable.
6/14

Care instructions KaVo SYSTEM 1056 S/T
2 Preparation methods | 2.2 Disinfection
2.2 Disinfection
2.2.1 Manual disinfection
Allowed disinfectants:
▪ S&M Microcide
▪ Dürr FD 322
Follow the manufacturer's instructions for use.
2.2.2 Automatic disinfection
Spittoon
▶ Rotate spittoon anti-clockwise and lift off.
▶ Place the spittoon in a thermal disinfector and disinfect at 95°C.
Note
Adhere to the manufacturer's instructions.
7/14

Care instructions KaVo SYSTEM 1056 S/T
2 Preparation methods | 2.3 Sterilisation
2.3 Sterilisation
CAUTION
Product damage
Contact corrosion
▶ Remove the sterilised item from the autoclave immediately after sterilising.
CAUTION
Improper sterilisation
Damage to the sterilised product.
Risk of infection for operator and patients.
▶ Do not sterilise using hot air sterilisation, chemical cold sterilisation or ethylene
oxide!
CAUTION
Moisture
Nonsterility
▶ Ensure dryness. Autoclaves with a subsequent vacuum ensure dryness. In ad‐
dition, drying can be accelerated with a 10 minute drying phase with the
autoclave door open.
CAUTION
Damage to product as a result of sterilisation.
Faulty instrument tubing.
▶ Do not sterilise instrument tubing!
Instruments
For sterilising instructions, see the user instructions supplied with the respective
instruments.
3 function syringe cannula (preparation method according to DIN EN
ISO 17664)
Cannulae for the 3F handpiece (contra-angled and straight) are constructed dif‐
ferently.
▶ To prepare for sterilisation, hold down the water button on the 3 function hand‐
piece for 60 seconds and rinse the cannula.
8/14

Care instructions KaVo SYSTEM 1056 S/T
2 Preparation methods | 2.3 Sterilisation
▶ Detach cannula from 3F handpiece at an angle.
▶ Unscrew the 3F handpiece cannula in an anti-clockwise direction and in a
straight line.
▶ Sterilising the probes in an autoclave:
9/14

Care instructions KaVo SYSTEM 1056 S/T
2 Preparation methods | 2.3 Sterilisation
Method Duration/Temperature
Autoclave three times with an initial va‐
cuum for
at least 4 minutes/134℃ ±1
Autoclave using the gravitation method at least 10 minutes/134℃ ±1
Autoclave using the gravitation method at least 60 minutes/121℃ ±1
▶ Once it has been sterilised, fit or screw the cannula back on.
Standard tray
▶ Sterilise the standard tray in the autoclave at 135°C for at least 3 minutes.
10/14

Care instructions KaVo SYSTEM 1056 S/T
2 Preparation methods | 2.3 Sterilisation
Aspiration hose connection pieces
▶ Remove connection pieces from aspiration hoses.
Note
Sterilise the aspiration cannulae in accordance with the instructions supplied.
▶ To clean the connection pieces, hold under running water and clean with a brush.
Note
Connection pieces can be washed in a thermal disinfector at up to 95ºC and ste‐
rilised at up to 135ºC.
Cannulae
When sterilising the cannulae, adhere to the manufacturer's instructions supplied.
11/14

Care instructions KaVo SYSTEM 1056 S/T
2 Preparation methods | 2.4 Filling the water bottle
2.4 Filling the water bottle
▶ Remove water bottle by slowly rotating to the left.
Note
The excess pressure in the water bottle can slowly dissipate now.
CAUTION
Improper cleaning of water bottle.
Destroys the water bottle material.
▶ When rinsing the water bottle, never use water that is above 50°C in tempera‐
ture.
▶ The water bottle is not dishwasher safe.
▶ Remove protective hose from the tube of the Oxygenal doser.
▶ Pass tube through coarse filter opening on the Oxygenal bottle.
▶ Firmly twist the Oxygenal doser on the Oxygenal bottle.
12/14

Care instructions KaVo SYSTEM 1056 S/T
2 Preparation methods | 2.4 Filling the water bottle
▶ Rotate opening in lid to the 1.5 litre fill level
The lid locks into the fill position.
▶ Place Oxygenal bottle on a flat surface.
▶ Push the lid down until the dosage quantity exceeds the fill level.
The fluid exceeds the fill level; the excess is sucked back out to ensure an exact
dosage.
13/14

Care instructions KaVo SYSTEM 1056 S/T
2 Preparation methods | 2.4 Filling the water bottle
▶ Hold Oxygenal bottle in an almost vertical position and fill the water bottle.
Note
If sediment can be seen in the dosing cap, this is not contamination - it is an in‐
gredient that forms deposits following water condensation if left for a long time.
These deposits dissolve again after several dosage procedures.
14/14

1.003.9396 · En · 20080331 - 02 · en