HOW TO INSTALL AND USE A KAYAKS2FISH SIT ON TOP TROLLEY
Here is a YouTube video demonstrating
Step 1 Slide the trolley prongs onto the main pole with the prong with
the attached strap going on first.
Step 2 Slide on the black ring, align the holes, then use the bolt and nut
to secure.
Step 3 Insert the spring clip into the main pole until the button pops up.
Step 4 Install end cap.
Step 5 Screw on the black knob hand screws.
Step 6 Install the wheels by pressing the button down, once in all the way,
the wheels will be locked in place.
How to install the Kayaks2Fish Sit on top trolley
How to use the Kayaks2Fish Sit on top trolley
Step 1 Remove the scupper plugs from the kayak.
Step 2 Adjust the scupper poles in line with the supper holes of the kayak.
Step 3 Place the kayak on the side.
Step 4 Insert the scupper poles as far as they can go into the scupper holes.
Step 5 Turn the kayak the right way up.
Step 6 Strap the kayak down to the Sit-On-Top trolley.
WARNING:
Follow the manufacturer's instructions.
Do not use the trolley unless all components are correctly fitted and adjusted.
Do not use the trolley if any part is broken, torn or missing.
Do not use the trolley on a kayak exceeding the length/weight limit.
The trolley is not for highway use.
Keep away from children when installing.
https://k2f.com.au/s/clQ
IMPORTANT THINGS TO CHECK BEFORE YOU GO KAYAKING
Ensure you have all drainage plugs before you head out.
Ensure all fittings and fixtures are tight.
Give the hull a once over to check for any cracks or deformities.
Check the weather forecast.
Ensure you have first aid supplies.
Ensure you have a dry storage bag for your valuables.
Ensure you have told someone where you are going and when you are expected back.
