Kaye S1A User manual

Kaye
Products,
Inc.
ADAPTIVE
EQUIPMENTAND
REHABILITATION
PRODUCTS
535
DIMMOCKSMILL
ROAD HILLSBOROUGH,
NC27278USA
TEL.(e19)
732-6444 FAX
(800)
685-5293
KAYE ADJI'STABLE BENCHES
(effecti-ve 4
/ II / 2018)
These are the user instructions for
1-he Kerre Adrrr<f gf le BenCheS . A l I neonl e
t/vvyfe
who set-up, adjust, and use the bench
should first read these entire
instructi-ons.
Please store these instructions for
future reference.
USE These benches are designed as a
general purpose sitting device. They can
qcr\ra :q a n^qi f i nn inrr f nnl fnr ggg1.5 WhO
do not need upper body support as they
si t - hrri whn mev nood : ql-rl-r] a r'^+
rrLt vuu wrlv ttlqJ trsgv q ouallcr YEL
adjustable seat to help position their
l-ower body while they sit.
BENCHDESIGNS
The S1A, S2A, S3A, S4A, and S5A have
wj-der cushions. The extra width provides
added stability and room for two users.
The TSS and TSL, with their narrower
cushions, are designed to fit under smalL
desks and in tight spaces.
The S3A and S4A fol-d f l-at f or easv
transportation and storage.
BENCH
SIZES
--Tr,J mooet number is Located on the
warning label. For ol-der benchesr lou can
determine the model- by comparing the
bench's dimensi-ons to the foll-owinq chart.
When referring to the chart:
A : The cushion size (depth times width).
Inches are on the top row, centimeters oh
the bottom row.
B : The height adjustment from the fl-oor
to the top of the seat. Inches are on the
top row, centimeters on the bottom row.
C : Whether the bench folds.
Model A
(ins./cms) B (ins./cms) c (folds)
S1A 10112x26,
27x66 7
-
11,
18
-28 no
s2A 14x31,
36x79 101t2
-17,
27
-43 no
S3A 10112x26,
27x66 7
-11,
18
-28 yes
S4A 14 x31,
39x79 101t2
-17,
27
-43 yes
S5A 14x 31,
39x79 16
-23,
41
-58 no
TSS 10 112
x 12,
27
x30 7
-11,
18-28 no
TSL 14x17112,
39x44 101t2
-
17,
27
-43 no
FOLDINGAND UNFOLDING THE S3A AND S4A
To unfol-d the S3A or S4A, rotate the
two legs down until the l-atch push-pins
nral-rrrdo fram l-ha narroqnandinn clnf in
vv! ! vet/vrrvf rlY
the tel-escoping tubes.
To foLd the bench, depress the latch
push-pins and rotate the J-eg assembli-es in
rrnfi I thev rcsl- aoainst the rrnderSide Of
the bench.
ASSEMBLY
Some benches are shipped with the
Iegs removed and wrapped separately.
Instal-l- the legs as f ollows :
1. Remove the bl-ack knobs and washers from
each end of the bench.
2. Install- the legs with the l-abel-s facing
outward and the rubber feet pointing
downward
3. Pl-ace the washers and then the knobs
onto the bolts and tighten the knobs to
secure the leg in place.

TILT AND HEIGHT
ADJUSTMENT
To tilt and adjust the height of the
bench, adjust each leg as fol-l_ows:
1. Loosen the b.l-ack knobs .
2. Slide the feg sideways until the bolts
are in the vertical- sl_ots.
3- Morre f hc Ioa rrn nr dnr^rn
4. To tilt the }eg, move the front edge of
the leg up or down rel-ative to the rear as
shown:
LIMITED WARRANTY
If an item proves defective within
two years of the original purchase, we
wilJ- provide repJ-acembnt parts in order to
correct that defect. Normal_ wear and tear
is not covered by the warranty.
Kaye Products, Inc. makes no other
warranty, expressed or implied, and does
not warrant the product as being fit for a
particular purpose. The purchaser, owner,
and user assume al-l- risk of personal and
property injury due to the use of the
equ].pment.
A posture system is avail-abl_e for
each of the non-folding benches. That
system includes a pelvic support, a
femoral- stabilizer, and an abductor. When
added to the bench, this system provides
added stability to the pelvis and spine.
The accessories incl_ude their own
user instructions.
PIease calI Kaye Products or consul_t
their catalog for more detail_s.
MAINTENANCE
AND CARE
Tnsneal. J-ha rrni t- raarr'l rrl ', .n.i -1^+^-
srrru !EYuro!ry. rrgrrLctl
the nuts and bol_ts as necessary.
If the unit needs service or spare
parts, contact Kaye products, Inc. or the
distributor from whom you purchased the
item. If a probJ_em
is discovered that mav
imnar:f fho rrnittq frrnnt-inn i
rr!!t/qeL ulrs urlrL r !urreLrvrr, rmmediately
cease use and contact Kaye products, fnc.
Do not expose the unit to rain or
submerge it in water.
Use a slightly damp cl_oth to clean
unit, but wipe the dampness from the
after clea4ing it.
Avoid any undue stress to the bench
CAUTIONS
1. Do not fol-d or adi ust the
it is in use.
2. Each time you unfold the
ensure that the two push-pins
from their corresponding slots.
3. Do not use if there are
mi eei nd nrrl-c
4, The maximum weight l-imit for all_ models
1s 230 pounds or 104 kilograms.
5. Do not a1ter the bench or use it in any
way other than described in these
instructions.
6. Before use, always ensure that the
black knobs are tightened and the legs are
adjusted so that the bolts rest fully in
the horizontal slots.
1. Do not l-eave a chil-d unattended.
8. Do not til-t the leg so that one knob is
positioned more than two slots hiqher or
l-ower than the other.
9. Do not stand on the bench.
QUEST]ONS
?
If you have any questions, comments,
or requests, please contact Kaye products,
Inc.
((
Our authorized representative for
the European Medical_ Device Directives is
Advena, Ltd., PO Box 30, Leominster,
Herefordshire, HR6 0Ze, UK.
bench while
S3A or S4A,
fuJ-Iy extend
broken or
Rear
5. Slide the feg
bol-ts ful1y in the
sl-ots .
6. Tighten the knobs
ACCESSORIES
the
wood
s
j-deways to
ends of the
Front
seat the
horizontal-
EE
while using, storing, or transporting it
Kaye Benches, 4/1_1,/20L8,
paqe 2