Kaysun KCC-64 WEB User manual

Owner's Manual
Control Centraliced
Original instructions
Thank you very much for purchasing our product.
Before using your unit, please read this manual carefully and keep it for future reference.
KCC-64 WEB
KCC-64 WEB 2019

● This manual gives detailed description of the precautions
that should be brought to your attention during operation.
● In order to ensure correct service of the wired controller
please read this manual carefully before using the unit.
● For convenience of future reference, keep this manual
after reading it.

Table of Contents
I. Safety precautions.................................................................................1
II. Installation and Operation of the Data Converter .................................3
III. Function Description..........................................................................10
IV. APP Function Description..................................................................12
V. Web Client Operation .........................................................................37
VI. Remote Web Client Operation ..........................................................38

1
I. Safety precautions
The following contents are stated on the product and the operation
manual, including usage, precautions against personal harm and
property loss, and the methods of using the product correctly and
safely.Afterfullyunderstandingthefollowingcontents(identiersand
icons), read the text body and observe the following rules.
g Identierdescription
Identier Meaning
Warning Means improper handling may lead to personal or
severe injury.
Caution Means improper handling may lead to personal
injury or property loss.
[Note]: 1. "Harm" means injury, burn and electric shock which need long-term treatment
but need no hospitalization
2. "Property loss" means loss of properties and materials.

2
g Icon description
lcon Meaning
It indicates forbidding. The forbidden subject-matter is indicated in the icon
or by images or characters aside.
It indicates compulsory implementation. The compulsory subject-matter is
indicated in the icon or by images or characters aside.
Warning
Warning
Delegate
installation
Please entrust the distributor or professionals to install
the unit. The installers must have the relevant know-
how. Improper installation performed by the user without
permissionmaycausere,electric,shock,personalinjury
or water leakage.
Usage
Warning
Forbid Donotsprayammableaerosoltothewirecontroller
directly.Otherwise,remayoccur.
Forbid Do not operate with wet hands or let water enter the wire
controller. Otherwise, electric shock may occur.

3
II. Installation and Operation of the Data Converter
1. System structure diagram
The system mainly includes the central air conditioning system, data converter, router, App,
cloud server, and Web client. The user can monitor the air conditioning system via App or Web
client. The data converter is connected to the XYE bus of the air conditioner via port 485 of
the air conditioner. The power supply is connected to the mains supply via an adapter. For the
detailedconnection,seethefollowinggure:
Fig.2.1 Schematic diagram of connecting the outdoor unit to the central air-conditioning
system.
NOTE
It is recommended to wire from the Outdoor XYE port

4
Fig.2.2 Schematic diagram of connecting the indoor unit to the central air-conditioning
system.
If the data converter can only be connected to the outdoor unit, the outdoor unit shall be set
to enable automatic addressing so that the indoor unit can be located. For multiple systems,
port XYE of the outdoor unit is connected to the data converter in hand-in-hand manner. To
use one LAN cable to connect multiple KCC-64 WEB gateways, associate KCC-64 WEB
gatewayswithonerouter.Fortheconguration,seesection3.1.
Note: The new KCC-64 WEB is compatible with the V5X, V4+S, V4+R and Mini VRF outdoor
units
For more information, please contact the technical support engineer

5
2. Hardware
instruction
Fig.3.1 Structure dimension drawing

6
input Voltage:DC5V
Fig.3.2
Connect tothe
Ethernet
communication
terminal485 terminal
Power supply
terminal
RESET
Status indicator light

7
3. Instructions
1. Unpack the packing box to see if the accessories are all in readiness. Data converter
is shown as the following gure:
Name Qty. Outline
Data
Converter 1
Owner’s manual 1
Power adaptor 1
Wiring 3-terminal
and 1 bags of
xedscrews
1

8
2. Take the data converter out and power it on to see if the device is normal ( POWER
indicator lights up)
3. Data converter installation precautions
a. Don’t install it in the place where flammable gas leaks easily.Once flammable gas
leakageoccursandstagnatearoundthedevice,itmayresultinre.
b. Keep the device from heating element as far as possible.
c. Don’t install it in the place that is too dirty or humid.
4. LED Indicators
POWER: It is a power indicator, indicating that the power supply of the system is normal and
the system is running.
IP: It is a network communication indicator. When it flashes, it indicates that the data
converter is accessing the Ethernet. When it is off, it indicates that the data converter is not
accessingtheEthernet.Inthiscase,checknetworkconnectionandconguration.
485:It isanairconditionercommunicationindicator.When itashes,itindicatesthatthe
communication between the air conditioner and data converter is normal. When it is off, it
indicates that cable connection to port 485 is wrong or port 485 is not connected to an air
conditioner.
The data converter is restarted upon detecting abnormal communication. (If port 485 does
not communicate within 60s or the network port does not communicate within 3 minutes, the
data converter is reset.) In this case, POWER, IP, and 485 indicators are on together.
Fig.3.3
POWER indicator lights up

9
LED
indicator Colour Operating status Description
485 Green Flash Whentheindicatorashes,itindicates
that an air conditioner is connected.
IP Green Flash Whenitashes,itindicatesthatthedata
converter is accessing the Ethernet.
POWER Red Steady on Power supply of the system is normal.
Figure 3 LED indicators

10
5. Getting an IP Address
By default, the IP address of the data
converter is achieved by DHCP and allocated
by the access router. Only when App and
data converter are configured on one LAN,
can App read the IP address of the data
converter. To set a static IP address for the
data converter, log in to the embedded Web
page of the data converter.
III. Function Description
The data convert supports Web, HTTP, TCP,
and IP. Therefore, the user can remotely
access the central conditioning VRF system
via WAN. The App client on smart phones
and Web client are available.
Function list of App client
list.
management.
Account management.
Group management.
Logs.
Temperature unit.
Log out.

11
Web function list
①"AC Control": air conditioner control
②"Booking Control": scheduled operations
③"Operation logs": operation logs
④"User group": group management
①
②
③
④
APP download
IOS: Go to APP Store seach "M-control" or type http://www.aircontrolbase.com/login.html
to download the app
Android: type http://www.aircontrolbase.com/login.html to download the app

12
IV. APP Function Description
1. Registration Function
1-1 Registration Code
Before registering an account, the user must enter the registration code, as shown in the
followinggure.OpenAppclienton thesmartphone.Entertheregistrationcode,suchas
Kaysun,which istherst step.Then,click"OK".Alogininterfacewiththespecied logois
displayed.Seethefollowinggure:(Note:RegistrationfunctiononlyAPPclient)

13
1-2 Account Registration
A registered account is used to manage devices and set management permissions. The
registered account can also be used to log in to the App and Web clients.
Procedure:
①Click "Register". ②Enter a valid email
account and password.
The account information
is generated on the
cloud platform.
③After registration is
completed, activate the
account via the email.
Only the activated
account can be used
(Note:Email could be
delayed)

14
2. Virtual function
The virtual experience function is used for showing the main interface, AC control, booking
control and so on. Operation only available for choosing the unit of the temperature and
setting the AC, the other menu and function are invalid in this function.

15
3. App Conguration
Refer to the guide to connecting the KCC-64 WEB and port XYE of the outdoor unit. Connect
the KCC-64 WEB to the router. After login via App, the main interface prompts the user to
conguretheKCC-64WEB,asshowninthefollowinggure:
NOTE
Please connect the KCC-64 WEB to a network with administrator level permission, or not it
mayleadtosecurityproblemsaboutaccountconguration.
prompts
configuration.
displays the
configuration
displays two
configuration manners:
using a network cable or
scanning a QR code.

16
3-1: Using a Network Cable
Onlywhenthefollowingconditionsaremet,cantheusercongurestheKCC-64WEBviaa
network cable:
A. The KCC-64 WEB must access a wireless router.
B. The smart phone and KCC-64 WEB must be located in one network segment and
connected to one wireless router.
C. The wireless router must access the Internet.
① Selectacongurationmanner.
② The App will search for the KCC-64 WEB devices on its LAN and displays the IP address
ofeach KCC-64WEBgateway.Asshown inthegureabove, ②displays multiple KCC-
64WEB devicesfound.OnlyoneKCC-64WEBdevice canbeselectedforconguration.
Selectone,andthesystemcountsdown.Aftercongurationsucceeds,itgoestothemain
interface for displaying devices.

17
Note: When one LAN accesses multiple KCC-64 WEB gateways, IP addresses of these
gateways are displayed, as shown in ②. In this case, one-to-one correspondence between
the KCC-64 WEB gateways and the IP addresses cannot be achieved. It is recommended
that every time when the user completes configuring a KCC-64 WEB device, the user
should timely rename the KCC-64 WEB device and record its IP address.
ThefollowinggureshowshowtoconguremultipleKCC-64WEBgateways:
①Click "KCC-64 WEB Management". ②Click "+" at the upper right corner. The KCC-
64 WEB configuration interface is displayed. ③Select a configuration manner. The
subsequentsteps arethesameasthoseforconguringthe KCC-64WEBviaanetwork
cable. Repeat the preceding steps to add multiple KCC-64 WEB devices until all the KCC-
64WEBdevicesarecongured.