KDDI Speed USB STICK U01 User manual

■Memory
Windows Vista: 1GB or more is recommended (512MB or more is required)
Windows 7: 1GB or more is recommended (32-bit) 2GB or more is required (64-bit)
Windows 8/8.1: 2GB or more is required
Mac OS X: 512MB or more is recommended (256MB or more is required)
■Hard Disk
100MB or more is recommended (50MB or more free space is required)
Windows 8/8.1: 2GB or more free space is required
■Screen resolution
1024 x 768 or more is recommended
■USB port
USB 2.0 or USB 3.0 (except USB ports by PC manufacturer's specification)
■Compatible browser (for Speed USB STICK setting tool)
Microsoft Internet Explorer 8.0-11.0
Safari 6.0-8.0
Firefox 24.0-33
Google Chrome 10-39
Opera 11-25
Use outside these environments may affect performance. Operating environment (hardware,
connected peripherals, installed applications, etc.) may also affect performance. Operation
may not be performed properly depending on browser settings such as proxy or security in
Internet options.
* For PC support, OS version upgrade information, etc., see corresponding manufacturer’s
product support documentation and follow the instructions.
Names and functions of parts
■Front ■Back ■Back
(Under the Back cover)
①
②
③
②
④
①USB connector
Rotate the USB connector to pull out, then
connect to a USB port of PC.
②Status LED
Indicates status of the product.
③Back cover
④au Micro IC Card slot
Attach au Micro IC Card (LTE).
■Attaching to a PC
Unfold the USB connector. The USB connector can be unfolded up to 180 degree and the top
part can be rotated up to 180 degree.
・
Stow the USB connector back after removing the product from a PC.
* Do not unfold the USB connector more than 180 degree.
* Do not rotate the top of the USB connector more than 180 degree.
■Status LED indications
The product status is indicated by LED lightings.
LED color and lighting
pattern Status
Blinks in light blue WiMAX 2+/UMTS
connected (Signal: Weak)
Lights in green LTE connected (Signal:
Strong)
Blinks in green LTE connected (Signal:
Weak)
Flashes in green Updating software
LED color and lighting
pattern Status
Flashes in red Activating
Blinks in red
Out of service area
au Micro IC Card (LTE) not
inserted, PIN/PUK request
Lights in red Stand-by
Lights in light blue WiMAX 2+/UMTS
connected (Signal: Strong)
Attaching au Micro IC Card (LTE)
Your phone number etc. are stored on the au Micro IC Card
(LTE).
The product is compliant with au Micro IC Card (LTE) only.
IC cards other than au Micro IC Card (LTE) is not available.
* Do not insert an IC card with a conversion adapter.
* Although the phone number is stored as customer information, voice calls are not available
with the product.
* Note the following points, otherwise handling the au Micro IC Card (LTE) may cause
malfunction or damage.
・
Do not touch the IC (metal) part of the au Micro IC Card (LTE) or the IC card terminal inside
the product.
・Insert in the correct direction.
・Do not force to attach or remove.
* Enable PIN Code Operation to prevent au Micro IC Card (LTE) from unauthorized use by
others or to protect personal information (see next page).
1Slide the back cover in the
direction of arrow to remove
2
Face IC part of au Micro IC Card
(LTE) down and insert it in the
direction of arrow
•Check the notch orientation.
Notch
3Make sure that au Micro IC Card
(LTE) is fully set in, then attach
the back cover sliding in the
direction of arrow
Read Before Using
Quick Start Guide
Preface
Thank you for buying the Speed USB STICK U01 (simply called the “product” or “Speed USB STICK” from here on).
Before using the product, be sure to read the “Quick Start Guide” (this manual) and “Notes on usage” to
ensure correct use. After reading, store the manuals in a safe place for future reference.
“Quick Start Guide” (this manual) describes basic operations and settings of major functions.
As an instruction manual of the product, refer to the supplied “Quick Start Guide” (this manual), “Notes on
usage”, or “取扱説明書 詳細版 (Full Instruction Manual)” (Japanese) available on the au homepage. In this
manual, “Instruction Manual” includes “Quick Start Guide” (this manual), “Notes on usage”, and “取扱説明書 詳
細版 (Full Instruction Manual)” (Japanese).
・“Instruction Manual” is available on the au homepage.
http://www.au.kddi.com/support/mobile/guide/manual/
・Illustrations and screens shown in this manual may look different from the actual ones. In some cases,
minor details or a part of a screen may be omitted.
Exemptions and Safety Precautions
Before using the product, be sure to read the “Exemptions” and “Safety Precautions (Observe Strictly)” of “Notes
on usage” to ensure correct use.
When using the product
・During communication, please keep the device farther than 1.5 cm away from your body without including
any metals.
・Communication is not possible even inside the service area in places where the signal does not reach (e.g.
tunnels and basements). Also, communication is sometimes not possible in poor reception areas.
Communication is sometimes interrupted if you move into a poor reception areas during communications.
・Since this product uses radio waves, the possibility of communication intercepts by third parties cannot be
eliminated. (Though WiMAX 2+, LTE and UMTS systems have highly secure confidential communication
features.)
・This product is compatible with the international roaming service. Each network service described in this
manual varies depending on the area and service content.
・Since this product is a radio station under the Radio Law, you may be asked to temporarily submit the
product for inspection in accordance with the Radio Law.
・The product number of data communication terminals is automatically sent to KDDI CORPORATION for
maintenance and monitoring operational status of your data communication terminals.
・Take care not to inconvenience people around you when you use the product in a public place.
・When the product is used by a child, parents or guardians should thoroughly read the “Instruction Manual”
and teach the child how to use it.
・Before you start using the product overseas, check the relevant laws and regulations of the country/region
you visit.
Cell Phone Etiquette
■Use of the product is not allowed in the following places!
・Do not use the product while driving a car or riding a motorbike or bicycle. It may cause a traffic accident.
Use of the product while driving a car or motorbike is prohibited by law. Use of the product while riding a
bicycle may be punishable by some regulations.
・Use of electric devices on board is restricted. Follow the instructions of each airline company.
■Make sure where you are when using!
・Use the product in a place where it cannot block foot or traffic in a street.
■Pay careful attention to the people around!
・In a crowd such as crowded train, there may be people with a cardiac pacemaker nearby. Turn off the
power of the product in advance.
・When a medical institution such as a hospital has laid down designated areas where use of the product is
prohibited or is not allowed to be brought in, turn off the power of the product in advance.
List of packaged items
●
Speed USB STICK U01
main unit
●ご利用にあたっての注意事項
(Notes on usage)
(Japanese)
●Warranty card (Japanese)
●USB extension cable (Sample)
●はじめてガイド
(Quick Start Guide)
(Japanese)
* Keep the included accessories including warranty at hand.
What you can do with Speed USB STICK
Use this product on Windows/Mac PCs equipped with USB ports to perform data
communication by Internet connection using WiMAX 2+ or LTE system. When using abroad,
LTE system is available in addition to UMTS.
* The product automatically determines most suitable network at that time to connect.
* Communication by the product is a best effort only. Communication speed changes according to
congestion status of lines.
Operation environment (Compatible OS)
■Compatible OS
Windows Vista (32-bit/64-bit)
Windows 7 (32-bit/64-bit)
Windows 8 (32-bit/64-bit)
Windows 8.1 (32-bit/64-bit)
Mac OS X 10.5
Mac OS X 10.6 (32-bit/64-bit)
Mac OS X 10.7 (32-bit/64-bit)
Mac OS X 10.8 (64-bit)
Mac OS X 10.9 (64-bit)
Mac OS X 10.10 (64-bit)
For each OS, Japanese version/English version is supported.
However, Windows RT is not supported.
IC (metal)
au Micro IC Card (LTE)

Setting up on Windows PC
Connect the product to a Windows PC and start setup. Steps under Windows 7 are explained
here.
1Power on a PC to activate the OS
2Connect the product with au Micro IC Card (LTE) attached to the PC USB port
3Select "AutoRun.exeの実行 (AutoRun.exe)"
•When "ユーザーアカウント制御 (User Account Control)" screen appears, click "はい (Yes)".
•If "自 動 再 生 (Auto run)" settings on Windows 7 PC is changed, "AutoRun.exeの実行
(AutoRun.exe)" does not appear, the installation starts instead.
•When a installation confirmation message appears, click "はい (Yes)".
4The installation starts
When "Speed USB STICK setting tool" shortcut icon is displayed in the PC desktop, the
installation is complete.
Accessing Internet
To perform data communication accessing Internet, subscription to corresponding Internet
Service provider (ISP) is required.
For details, refer to the latest au catalogs/au homepage.
•For corresponding ISP, refer to au homepage. Services of corresponding ISP and the
settings vary by ISP. Contact your corresponding ISP.
Changing the access point profile
In the product, "Internet" is set as an Internet access point (Profile) in advance. Change, create
or edit profile using Speed USB STICK setting tool.
■Changing the profile
To change the access point, from the Speed USB STICK setting tool top page, change Profile
in Change Profile.
Speed USB STICK setting tool
Use a Web browser on a PC with the product connected to change the product settings.
1Connect the product to a PC and double-click "Speed USB STICK setting
tool" shortcut icon on the desktop (or dock for the Mac)
Web browser activates, then Speed USB STICK setting tool top page appears.
•For setting each function of the product, select "To Advanced" to go to the function setting
screen.
■Switching to English display
In Speed USB STICK setting tool top page, select “English” for 言語 (Language).
International roaming
For overseas use of the product, activate Speed USB STICK setting tool to change the network
operator you use in the country.
Even if the roaming setting is on, you can use your domestic network in Japan.
1From the Speed USB STICK setting tool top page, "To Advanced"→"Basic
Settings"→"Roaming Settings"
2Turn on International Roaming Setting, then select Roaming Mode
3Select "Apply", then "Continue"
PIN management
Set PIN (security code) to prevent au Micro IC Card (LTE) from unauthorized use by others; PIN
entry is required when the product is connected to a PC.
1From the Speed USB STICK setting tool top page, "To Advanced"→"Advanced
Settings"→"PIN Code Management"
2
Select "Enable" from PIN Code Operation, then enter a current PIN to PIN
Code field
•DefaultPINissetto"1234".WhenPINCodeOperationissetto"Enable",PINcanbe
changed to desired 4 - 8 digit number.
3Select "Apply", then "Continue"
■Authorization
When PIN Code Operation is set to "Enable", PIN entry is required for accessing Internet on a
PC with the product connected.
1Connecting the product to a PC
2Activate Speed USB STICK setting tool
PIN authorization screen appears.
3Enter a correct PIN to PIN Code
4Select "Apply"
Speed USB STICK setting tool top page appears.
Main specifications
Dimensions Approx. 32 (W)×94 (H)×13.5 (D) mm
Weight Approx. 38g
Interface USB 2.0 High Speed (USB terminal)
Wattage During communication, normal: Approx. 1.2W (WiMAX 2+)/
Approx. 1.3W (LTE)/Approx. 1.2W (UMTS)
During communication, Max.: Approx. 2.3W (WiMAX 2+)/
Approx. 2.8W (LTE)/Approx. 2.1W (UMTS)
*Varies by using condition.
Operation environment Operating ambient temperature range: 5°C - 35°C
Humidity: 35% - 85%
Compatible Networks Domestic: WiMAX 2+, LTE
Abroad: LTE, UMTS
Troubleshooting
Please check the following if problems such as being unable to connect to the Internet from a
PC remain even after setting and reading this manual and “取扱説明書 詳細版 (Full Instruction
Manual)” (Japanese).
* Signal strength, communication congestion, amount of contents may affect communication
status.
■Internet connection fails.
1. Check that you are inside the service area.
2.
When a signal reception is poor, move to a good reception area, then try again.
3. Access point can get busy at certain time. Wait a while and try again.
4. Activate Speed USB STICK setting tool and make sure that Internet settings are proper.
■Communication stops intermittently.
1. Signal reception may be poor. Check in a good reception area.
2. Make sure that the product and a PC are properly connected.
3. Remove the product from a PC, then try again.
4. If connection is not established after the above-mentioned steps are performed, disconnect the
product from the PC, restart the PC and then connect the product again.
■Communication speed is slow.
1. Signal reception may be poor. Check in a good reception area.
2. Access point may be busy. Wait a while and try again.
■I want to reset the product to the default status.
1. To reset to the default settings, from the top page of Speed USB STICK tool, “To Advanced” →
“Advanced Settings” →“Restore Defaults” →“Restore Defaults” →“OK”.
Trademarks
Microsoft®, Windows®, Windows Vista®are trademarks or registered trademarks of Microsoft Corporation in
the United States.
The official name for Windows is Microsoft Windows Operating System.
Internet Explorer is a trademark or registered trademark of Microsoft Corporation in the United States/other
countries.
Firefox is a trademark or registered trademark of the Mozilla Foundation in the United States/other countries.
Google, Android and Google Chrome are trademarks or registered trademark of Google Inc.
Opera is a trademark or registered trademark of Opera Software ASA. For details about Opera, refer to
http://www.opera.com/.
Mac, Macintosh and Mac OS are trademarks or registered trademarks of Apple Inc. in the United States/
other countries.
HUAWEI are registered trademarks or trademarks of HUAWEI TECHNOLOGIES CO., LTD. in China.
Other company names and product names referred to in this manual are trademarks and registered
trademarks of respective companies. ® or TM mark may be omitted in this manual.
For inquiries, call
From fixed-line phones:
0077-7-113
From au cell phones:
113 without area code
For loss, theft or damage
(toll-free)
In case above numbers are not available, call (toll-free)
0120-977-033
(except Okinawa)
0120-977-699
(Okinawa)
Keitai Guarantee Service Center
For loss, theft, damage (toll-free)
From fixed-line phones/au cell phones,
0120-925-919
Business hours 9:00-21:00 (7 days a week)
Customer Service Center
For general information, charge and
operation information (toll-free)
Pressing “zero” will connect you to an operator,
after calling “157” on your au cell phone.
From fixed-line phones:
Business hours: 9:00–20:00 (7 days a week) Business hours: 24 hours (7 days a week)
0077-7-111
From au cell phones:
157 without area code
December 2014, 1st Edition
KDDI CORPORATION·OKINAWA CELLULAR TELEPHONE COMPANY
Imported by: HUAWEI Technologies Japan K.K.
Manufactured by: HUAWEI TECHNOLOGIES CO., LTD.