KEC DVD -3 User manual
DVD Player User’s Manual
DVD - 3/DVD -3T
3406100490B
is the prohibition mark. If this appears when you operate the
product, wait until it disappears. If this phenomena repeats, the
current button does not cope with the disk in play.
NOTICE
For additional information or for the location of an authorized service center, please
contact KEC Mobile Applications / KTV USA, Inc. at (800) 524-1216 or (973) 470-9191
KTV USA, Inc. 1 Madison Street East Rutherford, NJ 07073 800 524-1216 / 973 470-9191
KTV USA, Inc. ©2005
Preparations
Connection Setup Use Others
HY-DVD3-COVER 2005.9.30 9:58 AM Page 2
2
Safety Precautions
Cautions are composed of Warning and Attention which mean
the followings respectively.
: Possibility of fatal injury or death
: Possibility of minor injury or product damage
Put the cigar jack into the
deepest point to prevent
shaking.
It may cause a poor contact or
fire.
Never use any damaged
cigar jack.
It may cause a poor contact or
fire.
Never touch the cigar jack
with wet hands.
It may cause a fire or electric
shock.
Never hold the product
with your hands while the
disk is in play.
It may cause a breakdown of
disk or product.
Be careful not to get the
cigar jack ca le entangled.
It may cause an accident.
Do not expand the cigar
jack too severely.
It may cause the battery dis-
charge from instable voltage.
Gra the cigar jack firmly
to pull it out.
If not, it may cause a heat
emission or fire.
Watching or adjusting is
prohi ited during drive.
It may cause a traffic accident.
Secure your vision from
the product.
It may cause a traffic accident.
Preparations
Don’t put ooks or water-
filled vessels.
It may cause a breakdown.
Don’t put metals(coin, hair
pin, ironware, etc.) or urn-
a le foreign
materials(match, paper, etc.)
in the disk inlet or port hole.
It may cause a fire or electric
shock.
Put the product at a flat
and sta le place.
Otherwise, It may cause a
wrong operation.
Neither use nor store ignita le
sprays or inflamma le materi-
als in the vicinity.
It may cause an explosion or fire.
Avoid the vicinity of the han-
dle kno for installation.
It may cause a traffic accident.
Keep the remote control away
from the rake pedal.
It may cause a traffic accident.
Never disassem le or modify
the product on your own.
It may cause a breakdown.
Keep the volume reasona le.
It may cause an interfering other drivers
and being ignorant of surrounding situa-
tion.
What is dewing?
The DVD player may create humidity when it
is under sudden change of environment.
‘Dewing’ inside the DVD player may suspend
operation for 2 or hours.
To prevent dewing?
Supply power and leave the product at a dry
place for more than 2 hours to eliminate the
internal humidity.
Dewing occurs when
You move to a warmer outdoor place from a
room or car which is well air-conditioned in hot
summer.
You move to a warm room from a cold out-
door place in winter.
Do read and use the followings carefully for your safety and product protection.
HY-DVD3-ENG 2005.9.30 11:40 AM Page 2
4
Special Features
5
Preparations
Contents
Connection
Connecting to TV/Audio . . . . . . . . . . . . .15
Use
Disc Play(DVD, VCD, CD) . . . . . . . . . . .22
Checking DISPLAY . . . . . . . . . . . . . . . . .2
Checking disc Menu . . . . . . . . . . . . . . . . .2
Changing Disc Audio/Subtitle language
during the playback . . . . . . . . . . . . . . . . .24
Searching Video track/Music . . . . . . . . .25
Slow Play . . . . . . . . . . . . . . . . . . . . . . . . . .26
Repeat Play . . . . . . . . . . . . . . . . . . . . . . .27
Zooming-In/Angling . . . . . . . . . . . . . . . . .28
Searching Screen/Music . . . . . . . . . . . . .29
Playing MP and WMA Disc . . . . . . . . . . 0
Photo View by JPEG Disc . . . . . . . . . . . . 1
Others
TroubleShooting . . . . . . . . . . . . . . . . . . . 2
Product Specification . . . . . . . . . . . . . . . . 4
Reference ............................................. 5
Setup
Function Setup(Setup Menu)
. . . . . . . . . .16
LANGUAGE Setup . . . . . . . . . . . . . . . . .17
DISPLAY Setup . . . . . . . . . . . . . . . . . . . .18
AUDIO Setup . . . . . . . . . . . . . . . . . . . . . .19
LOCK Setup . . . . . . . . . . . . . . . . . . . . . . .20
OTHERS Setup . . . . . . . . . . . . . . . . . . . .21
Preparations
Safety Precautions .......................................2
Special Features .....................................4
Disc Information ......................................6
Disc Handling and Storage......................7
Parts Name & Description
(Front, Front
panel Display, Rear)................................8
Parts Name & Description (Remote Control
Battery Change)........................................
11
Parts Name & Description(Cautions for
Battery Handling)...................................11
Parts Name & Description
(Name and
Function of Remote Control Buttons).....12
Precautions for DC Input/
Output Port Use.....................................14
Checking Accessories ...........................14
Covers DVD, VCD, SVCD, and CDDA
Covers play MP3, WMA, and
JPEG(i.e. CD-R, CD-RW, DVD-R,
DVD+R, DVD-RW, and DVD+RW disk
containing MP3, WMA, or JPEG)
OSD(On Screen Display)
Press [DISPLAY] to display the information on
the DVD/VCD/CD disk and the device.
Screen Saver
High Performance Video(27Mhz/10 it)
Coaxial Digital Output(PCM, Dol y
Digital, dts)
Dol y Digital Decoder is uilt in.
Composite Video Output(x1)
S-Video Output(x1)
Slow Forward and Reverse
Play ack(DVD)
Fast Forward and Reverse
Play ack(DVD)
Title, Chapter, and Time Search for
DVD and Track and Time Search for
VCD/CD
Various Screen Ratio(DVD)
4: Zoom(Pan and Scan), 4: General(Letter
Box), and 16:9 Wide(Wide)
Repeat Play(Title and Chapter for
DVD and Track and disc for VCD/CD)
Repeat Play of Specific Area(A-B)
Selective Play(DVD/VCD/CD)
Title or Chapter for DVD and Track for Video
CD/CD
Various Voice Language(DVD)
Up 8 Voice Languages.
The number of languages depends on the disc
for SVCD and VCD.
Various Open Caption Language(DVD)
Up 2 Open Caption Languages.
The number of languages depends on the disc
for SVCD and VCD.
Various Angle Screen(DVD)
Simultaneous Multi Screen at Various
Angles(The number of screens depends on
the disc.)
Screen Zoom
3D Sound Effect
D Sound Effect Service
Free Volt
From 12V to 24V
HY-DVD3-ENG 2005.9.30 11:40 AM Page 4
7
Preparations
6
Disc Information
DVD(Digital Versatile Disc) is a disc with a maximum capability of 1 5 minutes
long image, 8 Disc Audio languages, and 2 Subtitle languages. It also has the
function of MPEG-2 type image compression and dolby digital D surround so that
you are able to bring a movie theater at home enjoying vivid image and clean
sound quality.
Both DVD player and disc have encoded country codes that you have to accord
with before use.
Other discs than specified above shall not be used for this device.
DVD, DVD-Audio, DVD-ROM, and CD-ROM with an incompatible area code shall not
be used for this device.
The area code for the player is written in the back.
Disc for Play
1
Dolby Digital Digital Audio Disk Stereo Disk
Broadcasting Method
MP Disc
Disk Type Disk Logo Saved Signal Disc Size
DVD VIDEO
DVD AUDIO
DVD-R
DVD+R
DVD-RW
DVD+RW
VCD
Audio + Video
Audio + Video
12 cm
12 cm
Audio 12 cm
CD
CD-R
CD-RW
Disc Handling and Storage
Even tiny scratch on the disc may affect the screen. Please take special care.
Disc Handling
Press the center holder to put a disc out of the case with
convenience.
Do not touch the disc surface but refer to the figure to
move a disc.
Do not stick paper or tape on a disc. It may be bent.
Do not leave fingerprint or dust on a disc. Be sure to check
and clean any before use.
Disc Handling
For a disc stained by fingerprints or dirty foreign materials,
wipe it out with neutral rinse and water and dry it with a soft
towel.
From inside to outside
•
Sudden temperature rise may dew the operating part or lens of a product, resulting in play failure.
If then, supply power and insert a disc 1 or 2 hours later.
•
Do not use chemicals such as thinner, benzene, commercial rinse, alcohol, or static electricity preventive
spray for LP at all times. This may hurt the disc.
•
Do not let dust or foreign materials on a disc.
•
Do not use broken or scratched discs.
Disc Storage
Without direct ray Good ventilation Availa le for vertical
storage
HY-DVD3-ENG 2005.9.30 11:40 AM Page 6
9
Preparations
8
Parts Name & Description
Front
8
64 5
109
12
1 POWER
Turns on/off power.
2 PLAY
Plays discs.
3 Disc SLOT
Receives and discharges discs.
4 Remote Sensor
Receives signals at a remote control.
5 NEXT/BACK
Skips chapters or tracks.
6 EJECT
Takes out discs.
7 STOP
Stops disc operation.
8 Display Window
Shows the current condition of players or
discs.
9 VIDEO IN
Connects a video cable with a video input port
and a video output port of other device.
10 AUDIO IN
Connects an audio cable with an audio input
port and an audio output port of other device.
7
Front Panel Display
1 DVD/SVCD/VCD/CD/MP3
Displays the disc type inserted in the main
body.
2 Dol y Digital
Indicates the disc in play was recorded by
dolby sound effect.
3 ANGLE
Indicates the disc in play is being watched at
various angles.
4 ROTATE
Indicates a disc is rotating.
5 PLAY/PAUSE
Displays the current operation mode.
6 REPAT/ALL
Displays the current Repeat/Play mode.
7 TITLE/CHAPTER
Displays the title or chapter information on the
DVD disc in play.
8 VISION
Displays the information on vision and opera-
tion modes such as Play, Stop, Disc-
Confirmed, or No-Disc.
9dts
Indicates the disc in play was recorded by dts
sound effect.
10 PBC (Play Back Control)
Displays the PBC operation condition while
VCD plays.
4 6 75
110
1
91
8
2
HY-DVD3-ENG 2005.9.30 11:40 AM Page 8
11
Preparations
10
MATE & LOCK
VIDEO OUTS-VIDEO
REMOTE
SENSOR
OUTIN
R-LINK
AUDIO-L AUDIO-R DIGITAL OUT
DC 12-24V
This device complies with part 15 of the
FCC rules. Operation is subject to the
Following two conditions.
(1) This device may not cause harmful
Interference, and (2) This device must
Accept any interference that may cause
Undesited operation.
Class 1 Laser Product
Parts Name & Description
Rear
1 VIDEO OUTPUT
Connect a video cable with a video output port
and a video input port of other device.
2 AUDIO OUTPUT
Connect an audio cable with an audio output
port and an audio input port of other device.
3 DC INPUT
Use the cigar jack for connection.(extra)
4 DC INPUT
Use the DC power cable for connection.
5 R-LINK IN/OUT
Allows remote control of any KEC Mobile
Applications video product in the R-LINK
chain even if it is hidden from view.
6 EXTERNAL REMOTE CONNECTOR
Use the external remote control cable.
7 S-VIDEO
Connect the S-Video cable with the S-Video
output port and TV S-Video input port for the
better resolution.
8 VIDEO OUT
Connect the Video cable with the Video output
port and TV Video input port.
9 AUDIO OUT
Connect the Audio cable with the Audio output
port and TV or Receiver Video input port.
10 DIGITAL AUDIO OUT
Connect the DVD player with a compatible
Dolby Digital Receiver or Decoder or DTS
Receiver or Decoder.
4 5 6 7 8 9 10
1 2
Parts Name & Description
1. Push the battery lid in
the arrow direction to
open it.
2. Put batteries in, checking
their polarity.
(1.5V, AAAx2)
. Push the battery lid
back in the arrow direc-
tion to close it.
➡➡
Remote Control Battery Change
Using Remote Control
The remote control can cover as long as 7m
from the DVD receiver and up to 0
˚
to the left
and right.
Cautions for Battery Handling
Poor battery use may cause battery liquid leak or corrosion.
Check the polarity when you put batteries in.
Never expose a battery to heat or fire. Never disassemble or short a battery.
Check if a dead battery is in the remote control.
Never combine batteries of different type. Do not leave an old battery when you put a new
battery in.
When you don't use the remote control for a long time, please take out all batteries to prevent
their corrosion.
In case of poor operation of the remote control or shorter operation distance, replace the
batteries.
In case of battery liquid leak, clean the liquid from the remote control and replace the batteries.
HY-DVD3-ENG 2005.9.30 11:40 AM Page 10
13
Preparations
12
Parts Name & Description
Name and Function of Remote Control Buttons
1
7
8
11
12
14
15
18
22
2
24
27
28
17
2
4
5
6
9
10
1
16
19
20
21
25
26
29
1 POWER (also on the DVD- front panel)
Press to turn the DVD player ON/OFF.
POWER OFF automatically activates AUX inputs.
DVD- T Only: Press repeatedly to cycle through
DVD → TV →AUX.
2 EJECT (also on the DVD- front panel)
Press to eject the disc.
3 S-TITLE
Use to choose and cycle through the available
subtitles. This function will only work if the disc
contains subtitles.
4 LANGUAGE
Use to cycle through soundtracks in various
languages. This function will only work if the disc has been recorded
with multiple language soundtracks.
5 ANGLE
Use to access various camera angles. This function will only works if
he disc has been recorded with multiple camera angles.
6 TITLE
Displays the titles on the disc under play.
7 MENU
Displays the menus of the disc being played.
8 MODE
Use to choose play or repeat mode.
9 VOLUME
Adjusts the audio output levels of the DVD- to equalize its output with other
program sources in the vehicle (VCP, Video Game, etc).
IMPORTANT NOTE:
If the DVD- Volume Control is set to “0”, no sound
will be heard regardless of the settings of any other system volume controls.
10 ZOOM
Zooms in on picture.
11 A - B
Repeats the selected segment.
12 GOTO
Use to go to the track or chapter of the DVD disc you want.
13 MUTE
Cuts off the sound.
14 STOP (also on the DVD- front panel)
Stops disc play.
DVD- T Only: Erases TV channel from memory in TV mode.
15. PAUSE
CD: The audio will be paused.
DVD: Still frame mode. Press repeatedly to advance the picture frame
by frame.
DVD- T Only: Starts automatic channel scan.
16. PLAY (also on the DVD- front panel)
Press to begin disc play.
DVD- T Only: Adds the channel to memory.
17. PREVIOUS (also on the DVD- front panel)
Press once to go to the start of the current chapter (DVD) or track
(VCD, CD, MP ).
Press again to go to the start of the previous chapter/track.
18. FR
Press repeatedly to fast reverse through the disc from 2X to 100X
faster. Audio will be muted. (DVD)
19. NEXT (also on the DVD- front panel)
Press to advance to the next chapter or track.
20 FF
Press repeatedly to fast forward through the disc from 2X to 100X
faster. Audio will be muted. (DVD)
21 ARROW KEYS / CH+, CH- KEYS
Use to move through the desired menu.
DVD- T Only: Use Up/Down to change channels & Left/Right to fine
tune channels.
22 ENTER
Use to choose the desired menu item.
23 SETUP
Press to display the DVD- ’s built-in SETUP Menus for Language, Video,
Audio and Parental Control.
24 SLOW BACK
Press repeatedly to slow reverse through the disc from 1/2X to 1/ 2X slower.
Audio will be muted.
25 DISPLAY
Moves to the title/track or chapter of a disc.
26 SLOW FORWARD
Press repeatedly to slow forward through the disc from 1/2X to 1/ 2X slower.
Audio will be muted.
27 NUMERIC BUTTONS
May be used to make direct selections from various menu screens.
DVD- T Only: May be used for direct entry of the desired channel.
28 TV/AUX
Press to cycle between DVD →AUX playback.
DVD- T Only: Press to cycle through DVD →TV →AUX.
29 NTSC/PAL
Press STOP button and then press NTSC/PAL button to select the
desired mode.
IMPORTANT NOTE: The DVD- is preset at the factory for NTSC
mode. Do not use this button unless you need to set the player for use
outside of the USA or other NTSC countries.
NOTE:
Buttons 1~2 & 14~20 are duplicated on the Tri-Mode Remote Controller (Part # RC9799 or RR9799) that is packaged with
all KEC MOBILE APPLICATIONS LCD Systems. The RC9799 or RR9799
llœœœœ
TRK/CHAP
√√√√ll
buttons also function as
Channel +/- buttons with the DVD- T. (Please see the Reference Section of this manual for more information).
HY-DVD3-ENG 2005.9.30 11:40 AM Page 12
15
Connection
14
When using the AUX input port of the head unit
Connecting to TV/Audio
MATE & LOCK
VIDEO OUTS-VIDEO
REMOTE
SENSOR
OUTIN
R-LINK
AUDIO-L AUDIO-R DIGITAL OUT
DC 12-24V
This device complies with part 15 of the
FCC rules. Operation is subject to the
Following two conditions.
(1) This device may not cause harmful
Interference, and (2) This device must
Accept any interference that may cause
Undesited operation.
Class 1 Laser Product
Connect the audio ca le to the Audio Output(L/R) port in the ack of the
DVD player and the Audio Input port of the car stereo.
1
Connect the video ca le to the Video Output(L/R) port in the ack of
the DVD player and the Video Input port of TV.
2
DVD Player
Audio Cable
Connect the DC power supply cable to
the head unit power supply cable.
Connect to AV1 or AV2.
Remote Control Sensor
Attention : Do not use the DC power supply cable
while the car cigar jack cable is in use.
Wiring Diagram
DC Power
Supply Cable
Attention : Do not use the
cigar jack cable while the DC
power cable is in use.
Cigar Jack
Cable
Video Cable
TV A/V Cable
Do not use.
LCD TV (monitor)
Head Unit
When using the DC power supply ca le(DC Power Supply Ca le)
Connect the red cable port to ACC (DC 12V~24V) and the black one to the ground.
1
Use
➃
of Page 10.
Precautions for DC Input/Output Port Use
When using the car cigar jack(Extra Goods)
Check if the car cigar jack output voltage is DC 12V ~ 24V before you put it in the
DC input port.
Use
➂
of Page 10.
Please call the shop where you bought our product to buy other extra goods than
specified above.
Remote
Control
AAA
Cells
Faceplate Frame
Owner’s Manual
& Warranty Card
Mounting Sleeve
12V DC, A/V&
R-Link Cables
Remote IR
Sensor #RESMC
Mounting
Hardware
AC Adaptor
12V Cigar Plug
Adaptor
Option Accessories
Checking Accessories
2
HY-DVD3-ENG 2005.9.30 11:40 AM Page 14
17
Setup
16
Sets up the Menu language, Disc Audio, Subtitle languages recorded in a disc to see or hear a
language that you want to.
Menu Language
Selects the menu language for the DVD player
Disc Audio
Selects the Disc Audio language.
Disc Su title
Selects the Subtitle language.
Disc Menu
Selects the Disc Menu language.
Press [ENTER] utton.
• Setup process is complete.
• Press SETUP button to escape from the default menu.
4
DVD Setup
Press [SETUP] utton of the remote
control when a disc is not running
and press ➛➛❿❿utton to move to the
LANGUAGE Setup menu.
1
Press
❷
utton to enter the LANGUAGE
SETUP menu and press
❿❿
,
and
❷
uttons to select a language.
2
LANGUAGE Setup
•If the set menu language is not written on the disc, the menu is not displayed into the set
language.
Press [SETUP] utton when a disc
is not running
•
The SETUP menu appears.
1
Press SETUP when a disc is not running to enter DVD and the following screen to preset
various menus will appear as follows. Here comes the information of display.
The default setting will be left unchanged by power on or off.
Press ➛➛❿❿utton to move to the SETUP menu.
•
It changes in the order of LANGUAGE
➝
DISPLAY
➝
AUDIO
➝
LOCK
➝
OTHERS.
LANGUAGE Setup
You can set up Menu language, Disc Audio, Sub-title, and Disc Menu languages.
DISPLAY Setup
You can select Screen Size, Progressive Scan, or Broadcasting Method.
AUDIO Setup
You can set up the Audio Digital/Analog output method.
LOCK Setup
You can select the x-rating for minors.
OTHER Setup
You can set up various functions.
2
Press
❷
utton to enter the detailed menu, press ❿❿utton
to enter a su menu, and press
and
❷
uttons to select
the su menu.
3
Press [ENTER] utton.
•
Setup process is completed.
4
Press SETUP utton to exit the default menu.
•
Exits the default menu.
5
Function Setup
Using Setup Menu
•Press
➛
button to return to the previous menu during DVD
setup.
Refer to LANGUAGE of Page 17.
Refer to DISPLAY of Page 18.
Refer to AUDIO of Page 19.
Refer to LOCK of Page 20.
Refer to OTHERS of Page 21.
HY-DVD3-ENG 2005.9.30 11:40 AM Page 16
19
Setup
18
Depending on the active Audio Speaker condition, you can set up as follows.
Dol y Digital Output
- Bitstream : When connecting with Dolby Digital Decoder
- PCM : When connecting 2CH Output
DTS Output
- Bitstream : When connecting with DTS Decoder
- PCM : When connecting 2CH Output
PCM Sampling Frequency
- 48 KHz: When the active AMP can not deal with the 96KHz signal
- 96 KHz: When the active AMP can not deal with the 96KHz signal
Digital Output
- On : When turning on Digital Output
- Off : When turning off Digital Output
Press [ENTER] utton.
•
Setup process is completed.
•
Press SETUP button to exit the setup menu.
3
Press [SETUP] utton of the remote control
when a disc is not running and press ➛➛❿❿
utton to move to the AUDIOSetup menu.
1
Press
❷
utton to enter the AUDIO
Setup menu and press
❿❿, and ❷
uttons to select the menu for setup.
2
AUDIO Setup
DVD Setup
Here are the display setup options.
TV Aspect Size
- 16 : 9 : You can see the screen in the ratio of 16 : 9.
- 4 : 3 : You can see the screen in the ratio of 4 : .
Display Mode
- Letter ox : You can see the full screen in the ratio of 16:9 but a black margin will
appear both on the top and at the bottom respectively instead.
- Panscan : You can cut both sides of the 16:9 screen to zoom in the central part.
Press [ENTER] utton.
•
Setup process is completed.
•
Press SETUP button to exit the setup menu.
3
Press [SETUP] utton of the remote control
when a disc is not running and press ➛➛❿❿
utton to move to the DISPLAY Setup menu.
1
Press ❷utton to enter the DISPLAY
Setup menu and press ❿❿, and ❷
uttons to select a display.
2
DISPLAY Setup
HY-DVD3-ENG 2005.9.30 11:40 AM Page 18
21
Setup
20
PBC (Play Back Control)
This function is applicable to VCD 2.0 for the quick search
of a shot by using the menu recorded in a disc.
Auto Play
This function is applicable to the play of DVD to jump to the Watching Movie menu, ignoring
the initial ad or Root menu for disc play.
B.L.E
Darken the screen at night.
Load Default
Returns to the ex-work default.
Screen Saver
Screen Saver is used to prevent TV or monitor in use from being damaged.
When you stop or pause the DVD player for more than minutes, the DVD logo screen will
start moving.
Last Play
Starts the playback from the point where the playback stopped before.
Press [ENTER] utton.
•
Setup process is completed.
•
Press SETUP button to exit the setup menu.
3
Press [SETUP] utton of the remote control
when a disc is not running and press ➛➛❿❿
utton to move to the OTHER Setup menu.
1
Press ❷utton to enter the OTHERS
Setup menu and press ❿❿, and ❷
uttons to select an item for setup.
2
OTHERS Setup
DVD Setup
This function keep children off violent or erotic materials by setting the rating from 1 to 8.
For the disc without a proper rating, this function is not applicable.
Rating
- Rating 1,2: For every age(a disc free of obsceneness,
violence, drug, or insult)
- Rating 3: Under parents' instruction or recommendation, Improper for young kids(a
disc containing violence but free of plain obsceneness or drug)
- Rating 4,5: In the attendance of parents under the age of 1 (a disc free of sexual
act or excessive violence)
- Rating 6: In the attendance of parents under the age of 17(a disc for adult contain-
ing insult, violence, sexual act, and drug)
- Rating 7,8: Over the age of 17 only(a disc for adult only containing playing sexual
act and excessive violence)
Password
- New Password: Input a new password.
- Confirm : Input a new password again.
Press [ENTER] utton.
•
Setup process is completed.
•
Press SETUP button to exit the setup menu.
3
Press [SETUP] utton of the remote control
when a disc is not running and press ➛➛❿❿ut-
ton to move to the LOCK Setup menu.
1
Press ❷utton to enter the Rating
Setup menu and press ❿❿, and ❷
uttons to select a rating.
2
LOCK Setup
•For the disc without a proper rating, LOCK function is not applicable.
HY-DVD3-ENG 2005.9.30 11:40 AM Page 20
23
Use
22
Checking DISPLAY
Press [DISPLAY] utton.
DVD
The current title, chapter, time, disc audio language, subtitle language, camera, and D
sound effect will be displayed in the screen.
VCD
The current track, time, disc audio language, and D sound effect will be displayed in the
screen.
•What is Title?
Refers to a movie file recorded in a DVD disc.
•What is Chapter?
Refers to each chapter, a unit which classifies a movie file recorded in a DVD disc.
•What is Track?
Refers to a unit or a music which divides a scene recorded in a VCD or CD list.
1
Depending on the disc type, the Voice Language/Closed Caption function operates.
This function is available only during play.
Checking Disc Menu
Press [MENU] utton.
The menu in the disc will appear.
The menu differs by the disc.
Whenever you press MENU button, PBC will be turned on and off in turn.(VCD 2.0)
CD and VCD1.1 don't have this function.
For the disc containing Menu, you may select one out of the various menus as follows.
1
Press ❷, ❿❿, and ❷uttons to move to an item and
press [ENTER] utton.
2
DISC PLAY
Before playing a disc
Playing a disc
Check if the area code of your DVD player accord with that of a disc. If not, the disk won't oper-
ate.
Press [POWER] utton.
1
Let the la elled side(containing no data) of a disc face up
and put the disc in.
•
The disc will automatically operate.
2
Stop(
) Button
Stops play.
Play(❿❿) Button
- Press ❿❿to play the point whose play was suspended before.
- Press
twice and press ❿❿again to play a disc from the beginning.
Pause(ll) Button
- Pauses play of a disc.
- Whenever you press this button, the screen will change one by one.
- Press ❿❿button again to replay the disc.
•In minutes after a disc is paused, the DVD player will automatically enter the Screen Saver mode to protect
your TV.
•If you don't pull a disc out in 10 seconds after you press EJECT button to eject the disc, it will be automatically
loaded, eventually the disc will stop.
(DVD, VCD, CD)
HY-DVD3-ENG 2005.9.30 11:40 AM Page 22
25
Use
24
Searching Video track/Music
During disc play, use the following functions to search a video track or a music.
Quick Search of Screen/Song
(DVD, VCD, CD, MP3)
Press FR and FF and ( ) utton in the remote control
during play.
DVD
The play speed will change x2
➝
x4
➝
x16
➝
x100 by pressing the button.
VCD/CD
The play speed will change x2
➝
x4
➝
x8 by pressing the button.
MP3
The play speed will change x2
➝
x4
➝
x8 by pressing the button.
Skipping Chapter(Track) (DVD, VCD, CD, MP3)
Press BACKand NEXT
()
utton in play.
When pressing Back( ) utton,
it returns to the previous chapter.
When pressing NEXT( ) utton,
it moves to the next chapter.
Press PLAY button to recover the normal play speed.
During quick play, sound will be mute.(DVD/VCD)
1
1
Changing Disc Audio/Su title language during the Play ack
Depending on the disc type, the Disc Audio/Subtitle function may not operate.
This function is available only during the playback.
For the disc containing the disc audio information, press LANGUAGE to select a variety of
languages such as Kor, Eng, etc.(DVD)
Changing Disc Audio
Press [DISPLAY] utton.
1
Press ❷ uttons to select the Disc
Audio and
➛➛
❿❿uttons to select the
language.
2
•The subtitle language mark may vary with the disc type.
•A disc can contain as many as 8 subtitle languages.
•If you want the disc audio language whenever you play DVD, set a disc audio language in the
default setup.(See Page 19.)
For the disc containing the subtitle information, press S-TITLE button to select a variety of
languages such as Kor, Eng, Jap, etc.
Press S-TITLE button to turn it off and the subtitle won't appear any more.
Changing Su title Language
Press [DISPLAY] utton.
1
Press ❷ uttons to select a su ti-
tle language, and
➛➛
❿❿uttons to fix
the su title language.
2
•The subtitle language mark may vary with the disc type.
•A disc can contain as many as 2 subtitles.
•If you want the same subtitle language whenever you play DVD, set a subtitle language in the
default setup.(See Page 24.)
•The Disc Audio/Subtitle language selection function may be available depending on the disc
type.
•It won't operate after paused.
•It is available only during DVD play.
(DVD, VCD)
(DVD)
HY-DVD3-ENG 2005.9.30 11:40 AM Page 24
27
Use
26
Repeat Play
(DVD/VCD/CD)
Repeating Play of Chapter, Title & Track(Music)
Press MODE ( ) utton during
the disc play ack.
Whenever you press MODE button, the mode will
keep changing in the following sequence.
1
Repeating Certain Area
Press Repeat Area ( ) utton at
the point that you want to repeat
playing.
1
DVD
Chapter
➝
Title
➝
Off
VCD
Track
➝
All
➝
Off
CD, MP3
Track
➝
Random Play
➝
All
Press the button at both the start point(marked 'A') and the
end point(marked 'B') of the area that you want to repeat
playing. Only the selected area will be played over and
over again.
Press the button once more to cancel this setup.
DVD
- Off : When not playing in repeat
- Title : When playing the current title in repeat
- Chapter : When playing the current chapter in repeat
VCD
- Off : When not playing in repeat
- Track : When playing the current track in repeat
- All : When playing the current disc in repeat
CD, MP3
- Track : When playing the current track in repeat
- Random Play : When playing in Random
- All : When playing the current disc in repeat
•The function may not be available depending on the disc
type.
(DVD/VCD/CD)
Slow Play
Slow Play
Press SLOW ( ) utton in PAUSE or PLAY.
1
When pressing SLOW utton ( ),
it plays with x1/2, x1/4, x1/8, x1/16, and x1/ 2 in the forward direction.
When pressing SLOW utton ( ),
it plays with x1/2, x1/4, x1/8, x1/16, and x1/ 2 in the reverse direction.
Dividing Screens (DVD/VCD)
(DVD/VCD)
Press PAUSE
()
utton after a disc was paused.
Whenever you press it, the screen will proceed one by one track.
Press PLAY( ) button to recover the normal play speed.
1
Press PLAY ( ) button to recover the normal play speed.
During slow play, the sound will be mute.
This function is not available while CD, MP or WMA plays.
•The sound will be mute during this function is activated.
•This function is not available while CD, MP , or WMA plays.
HY-DVD3-ENG 2005.9.30 11:40 AM Page 26
29
Use
28
Searching Screen or Music
Searching y Time
Press Search ( ) utton.
1
Press or ❷utton to move to the
Time menu.
2
You may search a screen or a Music by Progress or Title/Chapter/Track.
If you want to search 1hr 5min 15sec, press
1, 0, 5, 1, and 5 followed y ENTER utton.
Then the screen after the selected hour will be
played.
3
Searching y Title or Chapter
Press Search( ) utton.
1
Press or ❷utton to move to the
Title/Chapter menu.
2
If you want to search Title 1, Chapter 3, press 1 and 3
followed y ENTER utton.
You have only to input the chapter to move in the same title.
3
Zooming-In/Angling
Zooming-In
Press ZOOM ( ) utton in the
Play or Pause mode.
1
Press ,❷,
➛➛
and ❿❿uttons to move the zoomed area.
2
The convex mark ( ) will be displayed presenting zoom ratios.
Whenever you press the button, the screen will be zoomed by
the following ratio.
400%
➝
1600%
➝
off
Press ANGLE button to select the screen at an angle.
In case the maximum number of screen is 1, the screen
angle won't change.
You may zoom the screen by 2 steps during play or pause.
When a disc contains an area shot at various angles, you may see the screen at those angles.
Changing the Camera Angle
(DVD)
(DVD/VCD)
Press ANGLE ( ) utton.
The mark ( ) will be displayed, present-
ing the maximum number of screen.
1
HY-DVD3-ENG 2005.9.30 11:40 AM Page 28
31
Use
30
Photo View y JPEG Disc
Photo View y JPEG Disc
Put a disc in.
Make the printed side of the disc face
upward.
1
1. Press ❷ button to select a photo.
2. Press NEXT/BACK button while a photo is viewed to
move to the next/previous photo.
. Press
➛➛
❿❿button to rotate the photo by 90
˚
> 180
˚
> 270
˚
> ORIGINAL step by step.
4. Press ZOOM button to see the screen at the zoom ratio of 400%
➝
1600%
➝
Normal step
by step.
•Only the files with the extension of JPG/JPEG are to be viewed.
•The JPG file name shall not contain special marks (\,/,:,*,!,<,>,|,...)
•Select the middle ( ) from the list to adjust the view speed in the order of (
➝ ➝ ➝
)
Playing MP3 and WMA Disc.
Playing File
Put in a Disc.
Make the printed side of the disc face upward.
As it enters, the first song is automatically played.
1
Press STOP button to stop play.
Press PAUSE button to pause play.
Press PLAY button to replay.
If you want to play a music.
1. Press ❷ button to select a music(track) followed by ENTER button. A music will be
played.
2. Input number keys and use ENTER button to play the music of a number rightly.
❉
A out MP3, WMA File
•MP or WMA files shall be in the format of ISO 9660 or JOLIET.
•The file name of MP or WMA shall not contain special marks( \,/,:,*,!,",<,>,|... )
•You are not allowed to record unwritable MP or WMA files.
•MP and WMA discs may not be played depending on the recording condition.
•WMA files may not play the data less than 48Kbps, kHz..
•Up to 6 tracks will be appeared per display.
•Press( ) or ( ) button to listen to the next or previous music.
•Press SLOW ( ) button to select a music in the other folder.
If you want to listen to only the music that you want to;
1. Press ❷ button to move to a music and press ❿❿button until it appears. Then, press
(ENTER) button to register the music in the program list.
2. Press
➛➛
❿❿button to move to the program, and press ENTER button.
•: When registering the whole list in the program
•: When deleting the music from the program
•: When deleting all the music from the program
HY-DVD3-ENG 2005.9.30 11:40 AM Page 30
33
Others
32
No sound
•Aren't you operating in the SLOW or SEPARATE
mode? (There will be no sound in the Flexible
Speed Screen Play mode.)
•Check the connection and further if SETUP is cor-
rect.
•Is the disc inserted right?(Make the printed side of
the disc face upward.)
•Check the disc condition.(Keep it clean.)
•By the specification, some discs may not obey the
default condition. Only the disc that has the same
function with the SETUP menu will operate.
•DVD discs are manufactured in the 16:9 Wide, 4:
Movie, and 4: Zoom screen according to the manu-
facturing condition. Each type always its own rated
screen.
•Check the DVD disc case to select the function
proper for a motion. For your reference, the 4:
standard disc may not be seen wide.
•Dolby Digital 5.1CH D sound effect can be heard
by the combination of the Dolby Digital exclusive
lamp. In addition, only the DVD disc recorded by
'Dolby Digital 5.1CH' may operate.
•Only the disc audio/subtitle language recorded in a
DVD disc can be played.
•Screen Angle is available only when the content by
angles is recorded in a DVD disc. In such a case,
the angle mark shall be printed in the product or
VFD.
The product does not operate
as per the initial setup condi-
tion.
TV Aspect selection is impos-
si le.
Dol y Digital 5.1CH 3D sound
effect does not come out.
Disc Audio or Su title lan-
guage which was selected
does not operate.
During DVD play, the Screen
Angle doesn't operate.
Trou leshooting
Take the following measures at first and further turn the product off and call our
Service Center.
The disc is running ut the screen
does not appear or it is poor or
shaking.
•Check if TV is turned on.
•Check the connection.
•Check if the main body is paused.
•Check if the disc contains foreign materials or is
damaged.
•Check the original condition of the disc.
•Check the connection with the Dolby Digital Lamp.
•Check the connection plug.
•Check if the connection port is stained with foreign
materials.
•Check the angle and distance of the remote con-
trol. Check any obstacle.
•Check if batteries are sufficiently charged.
•Isn't the product installed in too cold or hot place?
The optimum temperature for the operation ranges
0°C~ 50°C
•Check the existence of a disc.
•Check the power voltage.
•Check if the right side of a disc was faced upward.
•Check if the disc area code.
•Check the disc condition.
The sound quality is not even.
The remote control does not oper-
ate.
There is no image or sound or the
disc come out in 2~5 seconds.
Nothing plays.
HY-DVD3-ENG 2005.9.30 11:40 AM Page 32
35
Others
34
REFERENCE
KEC MOBILE APPLICATIONS TRI-MODE REMOTE CON-
TROLLER # RC9799 (or # RR9799)
The Tri-Mode Remote Controller is packaged with most KEC LCD Systems. In addition to
full remote
control of the LCD System, it also provides basic remote control commands for our DVD
and Videocassette
Players.
To control the DVD- with the RC9799 (or # RR9799), press the DVD MODE button.
To change to VCP control, press the VCP MODE button.
Notes:
• The LCD System control buttons are always available. They are not affected by the DVD/VCP
MODE buttons.
• This unit is not a universal remote controller. It is only designed to transmit control codes to KEC
Mobile Applications products.
DVD Mode Video Output Method NTSC/PAL
TV Mode Broadcasting Method
Voice Response 20Hz ~ 20KHz
Voice S/N Ratio 90dB
0.5Vp-p Impedance : 75
Ω
Output 0.5Vp-p Impedance : 75
Ω
1.0Vp-p Impedance : 75
Ω
Power DC 12V~24V, 1.5A
Power Consumption 18W
Product Size 178(D)x175(W)x50(H)
Weight 1. Kg
Allowa le Operating Temperature 0°C ~ 50°C
Allowa le Operating Humidity 0% ~ 80%
Allowa le Operating Condition Horizontal
Product Specification
Audio Analog
Audio Digital
Video
❉Design, accessories, and product specification may be changed without notice.
HY-DVD3-ENG 2005.9.30 11:40 AM Page 34
36
REFERENCE
ANOTE TO INSTALLERS CONCERNING THE KEC R-LINK SYSTEM
Most KEC Mobile Applications video products (TV, LCD, VCP & DVD) employ our R-LINK
System. This
allows all of our components to be remote controlled even if some of the components are
hidden from view.
If you are installing the DVD-3 along with one of our TV’s or monitors and one of
our VCP’s:
1. Connect an R-Link cable from the KEC TV/Monitor to the DVD- ’s R-Link Input
2. Connect an R-Link cable from the DVD- ’s R-Link Output to the R-Link jack on the
rear panel of the KEC VCP.
All KEC components may now e remote controlled y pointing any of the KEC
remote controllers at the remote sensor on any of the KEC components.
Please note that since pairs of KEC Mobile Applications Headrest Monitors are designed to be oper-
ated independently of each other, they are not equipped with R-Links. Please refer to the installation
information accompanying our Headrest Monitor Systems for information on the use of R-Link in con-
junction with those systems.
HY-DVD3-ENG 2005.9.30 11:40 AM Page 36
This manual suits for next models
3
Other KEC DVD Player manuals
