KEDSUM Professional Electric Nail Drill User manual

KEDSUM Professional Electric Nail Drill Kit
Thanks for purchasing the KEDSUM professional electric nail drill,hope you will have a good
shopping experience, pls read this manual carefully before usage.
1.How to use:
1).Choose the drill bits you need
2).There is a twist button (the friction part) in the middle of the drill handle,turn it to the left to
remove the original bits,insert the bits your need and turn it back,it will hold the drill bit in place
3).Turn the Off/Forward/Reverse button to the middle side to turn off the unit
4).Plug the adapter into the drill
5).Plug another side of the adapter into the wall outlet
6).Turn the Off/Forward/Reverse button to the left side to choose Forward direction,or turn it to
the right side to choose Reverse direction
7).Choose the speed you need from the speed dial
8).Enjoy your nail salon at home
9)When finished, turn the Off/Forward/Reverse button to the middle side to turn off the unit
2. How to remove or insert the drill bits into the handle piece:
1) Turn the twist button (the friction part) to left side until hear "beep" clicking sound, the chuck
[the handle piece] is open
2) Plug off the original bit
3) Insert one new bit
4) Turn it to right side to fix the bit and prevent it from flying out during using.
Please Note: Patterns metal part which is marked by red square circle shown as the following
picture.

3. How to use the Off/Forward/Reverse direction switch:
The left button is the Off/Forward/Reverse direction switch, the right button is the Speed Control.
1) If turn the Off/Forward/Reverse direction switch to the left side, it means the Forward direction
switch [by anticlockwise rotation];
2) If turn the Off/Forward/Reverse direction switch to the middle side, it means Off button;
3) If turn the Off/Forward/Reverse direction switch to the right side, it means the Reverse
direction switch [by clockwise rotation].
4.Specification:
Voltage: AC100-240V 50/60HZ
Power: 15W
Output rated voltage : DC1~12V
Output current: 0.8A
Variable speed: 500-20,000 RPM
5.Safety rules
1).Make sure the Off/Forward/Reverse button to be set on the Off position when you start to use
this unit.
2).Never unplug the adapter when the motor is still working.
3).Always unplug the appliance from the electrical outlet when not in use.
4).Do not attempt to repair the appliance. For repair service, please contact seller directly to
enjoy a fast, high quality service.
5).If the power cord is damaged, it must be replaced by the seller